Opens in a new tab

TPS2051CDBVR

0.5A power switch, active-high, 135mOhm, SOT-23-6, USB/load switching, fault report

12350

Effective Inventory

Image for reference only

Manufacturer Part:

TPS2051CDBVR

Package:

SOT-23-6 (2.90 x 1.60 x 1.20 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The TPS2051CDBVR from Texas Instruments is a current-limited power-distribution switch in SOT-23-6 with active-high enable and 0.5A continuous current. Operating from 2.7V to 5.5V, it provides short-circuit and thermal protection for USB and general-purpose load switching.

Key Specifications

Input Voltage 2.7 V to 5.5 V
Continuous Current 0.5 A
RDS(on) 135 mOhm (max) at 5V
Current Limit 0.9 A (typical)
Enable Active High
Operating Temperature -40C to +85C

Features

  • 0.5A current-limited power switch with 135mOhm RDS(on)
  • Active-high enable for direct MCU control
  • Short-circuit and over-temperature protection
  • Undervoltage lockout for safe startup
  • Fault reporting via open-drain OC output

Applications

  • USB port power switching
  • General-purpose load switching
  • Hot-plug power management
  • Peripheral power control
Product Introduction: TPS2051CDBVR Product Introduction

The TPS2051CDBVR from Texas Instruments is a single-channel current-limited power-distribution switch in a SOT-23-6 package. The N-channel MOSFET switch has 135mOhm maximum on-resistance at 5V input and supports 0.5A continuous current with 0.9A typical current limit. The active-high enable allows direct MCU control. Protection features include short-circuit current limiting, over-temperature shutdown, and undervoltage lockout. An open-drain fault output (OC) reports overcurrent and thermal faults. The device operates from 2.7V to 5.5V, making it suitable for USB port power switching and general-purpose load management in space-constrained designs.

Working Principle: TPS2051CDBVR Working Principle

The TPS2051CDBVR uses an N-channel MOSFET power switch with integrated protection. (1) Power Switch: An N-channel MOSFET with 135mOhm RDS(on) connects the input (IN) to the output (OUT) when enabled. A charge pump generates the gate drive voltage above VIN for low RDS(on). (2) Current Limiting: When the output current exceeds the threshold (0.9A typical), the current limit circuit reduces the gate drive to maintain constant current. If the overcurrent condition persists, the thermal protection activates. (3) Thermal Shutdown: When the junction temperature exceeds approximately 140C, the switch turns off. It automatically recovers when the temperature drops below the threshold. (4) UVLO: The undervoltage lockout ensures the switch is off when VIN is below 2.0V, preventing unstable operation during power-up. (5) Fault Output: The open-drain OC output pulls low when an overcurrent or thermal fault is detected.

Pin Description: TPS2051CDBVR Pin Definition and Functions
Pin Name Type Function
1 OUT Output Switch output to load
2 GND Ground Ground
3 OC Output Fault indicator (open-drain, active low)
4 EN Input Enable (active high)
5 NC – No connect
6 IN Input Power input (2.7-5.5V)
Application Scenarios: In which products and applications is TPS2051CDBVR used
  • USB port power switching with 0.5A current limiting and fault reporting
  • General-purpose load switching with active-high enable control
  • Hot-plug power management with short-circuit and thermal protection
  • Peripheral power control in SOT-23-6 compact footprint
Alternative Models: What chips are recommended as replacements for TPS2051CDBVR
Manufacturer Part Number Package Notes
TI TPS2051BDGNR MSOP-8 Same function, larger package
TI TPS22944DBVR SOT-23-6 0.5A load switch, similar
onsemi NCP380LSNAJT1G SOT-23-6 0.5A current-limited switch
TI TPS2041BDBVR SOT-23-6 Active-low enable version

Recommend Parts

BC857BS

Dual PNP transistor, -45V, -100mA, SOT363, Nexperia

Brand: NXP

Package: SOT363 (SC-88, 2.1 x 1.25 x 0.95 mm)

IN STOCK: 8813pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADUM1200ARZ-RL7

Dual-channel digital isolator based on ADI iCoupler technology, 2/0 direction, SOIC-8 narrow body, 1Mbps (A grade), 2.7-5.5V dual supply, 2500Vrms isolation, >25kV/us CMTI, -40C to +105C.

Package: SOIC-8 Narrow (5.06 x 3.99 x 1.75mm)

IN STOCK: 12476pcs

Cargo cycle: 3-7 Days

The minimum order is 1

PIC32MX795F512L-80I/PT

MIPS32 MCU, 80MHz, 512KB Flash, Ethernet, dual CAN, USB OTG, 100-TQFP

Brand: MICROCHIP

Package: 100-TQFP (14.0 x 14.0 x 1.0 mm)

IN STOCK: 5670pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IS61WV25616BLL-10TLI

4Mbit async SRAM, 256Kx16, 10ns, 3.3V, 44-TSOP-II Industrial

Brand: Issi

Package: 44-TSOP II

IN STOCK: 7802pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AT45DB081E-SHN-T

8Mbit DataFlash, dual-SPI 85MHz, 2x264B SRAM buffers, USON-8 (4x3mm), page-based ECC

Brand: Renesas

Package: USON-8 (4 x 3 x 0.6mm, 0.8mm pitch)

IN STOCK: 4500pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TIP35C

NPN power transistor, 100V VCEO, 25A Ic, 125W, TO-247, low saturation voltage, STMicroelectronics

Brand: ST

Package: TO-247 (through-hole, 3-pin)

IN STOCK: 11500pcs

Cargo cycle: 3-7 Days

The minimum order is 1