Opens in a new tab

Home » Integrated Circuits ICs, Interface ICs » SGM8905YPMS10G/TR

SGM8905YPMS10G/TR

3.3V RS-485/422 transceiver, 10Mbps, +/-16kV IEC ESD, MSOP-10, industrial

11786

Effective Inventory

Image for reference only

Manufacturer Part:

SGM8905YPMS10G/TR

Package:

MSOP-10 (3.00 x 3.00 x 0.90 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The SGM8905YPMS10G/TR from SG Micro is a 3.3V RS-485/RS-422 transceiver with +/-16kV IEC ESD protection in a MSOP-10 package. Supporting data rates up to 10Mbps, it provides robust half-duplex communication for industrial and building automation networks.

Key Specifications

Supply Voltage 3.0 V to 3.6 V
Data Rate 10 Mbps
ESD (IEC Contact) +/-16 kV
Common Mode Range -7 V to +12 V
Receiver Hysteresis 30 mV (typical)
Operating Temperature -40C to +125C

Features

  • +/-16kV IEC ESD contact discharge protection
  • 10Mbps data rate for high-speed RS-485 communication
  • -7V to +12V extended common-mode range
  • Fail-safe receiver with idle-high output
  • Half-duplex operation with driver/receiver enable

Applications

  • Industrial RS-485 networks (Modbus, PROFIBUS)
  • Building automation (BACnet, HVAC)
  • Motion control and motor drive communication
  • Security and access control systems
Product Introduction: SGM8905YPMS10G/TR Product Introduction

The SGM8905YPMS10G/TR from SG Micro is a 3.3V half-duplex RS-485/RS-422 transceiver in a MSOP-10 package. The device supports data rates up to 10Mbps with +/-16kV IEC 61000-4-2 contact discharge ESD protection on the bus pins. The extended -7V to +12V common-mode range provides robustness in noisy industrial environments. The receiver features 30mV hysteresis for noise immunity and open/short/idle fail-safe (output high when bus is undriven). Driver and receiver enable pins allow independent control of transmit and receive modes. The device operates from 3.0V to 3.6V with -40C to +125C industrial temperature range.

Working Principle: SGM8905YPMS10G/TR Working Principle

The SGM8905YPMS10G/TR implements an RS-485 half-duplex transceiver with ESD protection. (1) Driver: When DE is high, the differential driver amplifies the DI input and drives the A and B bus lines with RS-485 compliant voltage levels. The driver output is limited to +/-3.7V to protect against bus contention. (2) Receiver: When RE is low, the differential receiver compares the voltage between A and B. If VAB > 200mV, the output RO is high. If VAB < -200mV, RO is low. The 30mV hysteresis prevents output oscillation near the threshold. (3) Fail-Safe: When the bus is undriven (open, shorted, or idle), the receiver output defaults high, preventing false start bits in UART communication. (4) ESD: Integrated TVS structures on A and B pins absorb +/-16kV IEC contact discharge transients without external protection components.

Pin Description: SGM8905YPMS10G/TR Pin Definition and Functions
Pin Name Type Function
1 RO Output Receiver output
2 RE Input Receiver enable (active low)
3 DE Input Driver enable (active high)
4 DI Input Driver data input
5 GND Ground Ground
6 A I/O Non-inverting bus pin
7 B I/O Inverting bus pin
8 VCC Power Supply (3.0-3.6V)
Application Scenarios: In which products and applications is SGM8905YPMS10G/TR used
  • Industrial RS-485 networks (Modbus RTU, PROFIBUS) with +/-16kV ESD
  • Building automation (BACnet, HVAC) with fail-safe receiver
  • Motion control and motor drive communication at 10Mbps
  • Security and access control systems with MSOP-10 compact footprint
Alternative Models: What chips are recommended as replacements for SGM8905YPMS10G/TR
Manufacturer Part Number Package Notes
TI SN65HVD75DR SOIC-8 3.3V, 20Mbps, similar
TI THVD1419DT SOIC-8 3.3-5V, surge protected
Maxim MAX3485EASA+ SOIC-8 3.3V RS-485, ESD protected
onsemi NBC3485DR2G SOIC-8 3.3V RS-485, similar

Recommend Parts

TMP275AIDR

0.5C I2C temp sensor, 12-bit, 2.7-5.5V, alert output, 8-SOIC

Brand: TI

Package: 8-SOIC (4.90 x 3.91 x 1.50 mm)

IN STOCK: 3681pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IL485E

NVE IL485E IsoLoop isolated RS-485 transceiver, 2.5kVrms isolation, 35Mbps, 16-SOIC WB

Brand: nve

Package: SOIC-16 WB

IN STOCK: 5280pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFS4227TRLPBF

IRFS4227TRLPBF – 200V N-Channel HEXFET PDP Switch Power MOSFET, 26 mΩ RDS(on), D2PAK (TO-263)

Brand: infineon

Package: D2PAK (TO-263)

IN STOCK: 4334pcs

Cargo cycle: 3-7 Days

The minimum order is 1

CD4070BM96

Quad 2-input XOR gate, 3-18V CMOS, 65ns at 10V, SOIC-14

Brand: TI

Package: SOIC-14 (8.75 x 3.9 x 1.5mm)

IN STOCK: 4245pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AB1526

Bluetooth 5.0 Dual Mode Audio SoC, TWS, AAC, Dual-mic ENC, Integrated Charger, BGA

Brand: airoha

Package: BGA

IN STOCK: 25000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

LP2980IM5-5.0

50mA micropower ultra-low-dropout regulator, 5V, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.1 mm)

IN STOCK: 2557pcs

Cargo cycle: 3-7 Days

The minimum order is 1