Opens in a new tab

Home » Integrated Circuits ICs » TAJA225K016RNJ

TAJA225K016RNJ

2.2uF 16V tantalum chip cap, B-case 3.2×1.6mm, +/-10%, low ESR, AVX TAJ series

11881

Effective Inventory

Image for reference only

Manufacturer Part:

TAJA225K016RNJ

Package:

B-case (3.20 x 1.60 x 1.20 mm)

Brand:

Product Categories:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The TAJA225K016RNJ from AVX/Kyocera is a 2.2uF, 16V molded tantalum chip capacitor in a B-case (3.2×1.6mm) package. Part of the TAJ series, it provides stable capacitance and low ESR for decoupling and filtering in industrial and consumer electronics.

Key Specifications

Capacitance 2.2 uF
Rated Voltage 16 V
Tolerance +/-10% (K)
ESR 6 Ohm (typical at 100kHz)
Leakage Current 0.35 uA (max)
Operating Temperature -55C to +125C

Features

  • 2.2uF/16V stable tantalum capacitance for decoupling
  • B-case (3.2×1.6mm) compact surface-mount package
  • +/-10% tolerance for precise filtering applications
  • Low leakage current of 0.35uA maximum
  • -55C to +125C wide operating temperature range
  • Fused internal protection for fail-safe operation

Applications

  • Power supply decoupling and bypass filtering
  • Output capacitor for LDO and DC-DC regulators
  • Timing and coupling capacitors in analog circuits
  • Industrial control and automotive electronics
Product Introduction: TAJA225K016RNJ Product Introduction

The TAJA225K016RNJ from AVX/Kyocera is a 2.2uF, 16V molded tantalum chip capacitor in a B-case (3.2×1.6×1.2mm) surface-mount package. Part of the industry-standard TAJ series, the device provides stable capacitance with +/-10% tolerance and low ESR for reliable power supply decoupling and filtering. The molded construction provides excellent moisture resistance and mechanical reliability. The internal fused design offers fail-safe protection by opening the circuit during fault conditions rather than shorting, enhancing system safety. The device operates over a -55C to +125C temperature range with stable electrical characteristics. The 0.35uA maximum leakage current ensures minimal power drain in always-on circuits. The TAJ series is widely used in industrial, automotive, and consumer electronics for bulk decoupling and output filtering.

Working Principle: TAJA225K016RNJ Working Principle

The TAJA225K016RNJ uses tantalum metal as the anode with a manganese dioxide cathode. (1) Dielectric: A thin tantalum pentoxide (Ta2O5) layer formed on the sintered tantalum pellet serves as the dielectric. The oxide layer thickness determines the voltage rating (16V). The dielectric provides high capacitance per unit volume due to its high dielectric constant (approximately 27) and thin formation. (2) Cathode: Manganese dioxide (MnO2) serves as the solid cathode, providing self-healing properties. If a localized dielectric breakdown occurs, the resulting heat converts MnO2 to Mn2O3 (lower conductivity), isolating the defect site. (3) Fused Protection: The internal fuse element opens during sustained overcurrent or short-circuit conditions, disconnecting the capacitor from the circuit in a fail-safe manner. (4) ESR: The equivalent series resistance of approximately 6 Ohms at 100kHz is determined by the combination of dielectric losses, MnO2 resistance, and contact resistance.

Pin Description: TAJA225K016RNJ Pin Definition and Functions
Pin Name Type Function
1 Anode (+) Terminal Positive terminal (marked with bar)
2 Cathode (-) Terminal Negative terminal
Application Scenarios: In which products and applications is TAJA225K016RNJ used
  • Power supply decoupling and bypass filtering with 2.2uF at 16V
  • Output capacitor for LDO and DC-DC regulators in B-case footprint
  • Timing and coupling capacitors in analog circuits with +/-10% tolerance
  • Industrial control and automotive electronics with -55C to +125C range
Alternative Models: What chips are recommended as replacements for TAJA225K016RNJ
Manufacturer Part Number Package Notes
Vishay TANTAMOUNT-2.2uF-16V B-case Vishay tantalum equivalent
KEMET T491B225K016AT B-case Direct equivalent, KEMET T491
AVX TAJA225K020RNJ B-case 20V higher voltage rating
AVX TAJA475K016RNJ B-case 4.7uF same voltage

Recommend Parts

TMP275AIDR

0.5C I2C temp sensor, 12-bit, 2.7-5.5V, alert output, 8-SOIC

Brand: TI

Package: 8-SOIC (4.90 x 3.91 x 1.50 mm)

IN STOCK: 3681pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IL485E

NVE IL485E IsoLoop isolated RS-485 transceiver, 2.5kVrms isolation, 35Mbps, 16-SOIC WB

Brand: nve

Package: SOIC-16 WB

IN STOCK: 5280pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFS4227TRLPBF

IRFS4227TRLPBF – 200V N-Channel HEXFET PDP Switch Power MOSFET, 26 mΩ RDS(on), D2PAK (TO-263)

Brand: infineon

Package: D2PAK (TO-263)

IN STOCK: 4334pcs

Cargo cycle: 3-7 Days

The minimum order is 1

CD4070BM96

Quad 2-input XOR gate, 3-18V CMOS, 65ns at 10V, SOIC-14

Brand: TI

Package: SOIC-14 (8.75 x 3.9 x 1.5mm)

IN STOCK: 4245pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AB1526

Bluetooth 5.0 Dual Mode Audio SoC, TWS, AAC, Dual-mic ENC, Integrated Charger, BGA

Brand: airoha

Package: BGA

IN STOCK: 25000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

LP2980IM5-5.0

50mA micropower ultra-low-dropout regulator, 5V, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.1 mm)

IN STOCK: 2557pcs

Cargo cycle: 3-7 Days

The minimum order is 1