Opens in a new tab

TPS7A9101DSKR

1A LDO, 4.7uVrms noise, 70dB PSRR, 0.8-5.2V adj, 200mV dropout, WSON-10, RF/analog power

10024

Effective Inventory

Image for reference only

Manufacturer Part:

TPS7A9101DSKR

Package:

WSON-10 (2.50 x 2.50 x 0.80 mm, exposed pad)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The TPS7A9101DSKR from Texas Instruments is a 1A, ultra-low-noise (4.7uVrms), high-PSRR LDO regulator in a WSON-10 package. With adjustable output from 0.8V to 5.2V and 200mV max dropout at 1A, it powers noise-sensitive RF, ADC, and FPGA circuits.

Key Specifications

Output Current 1 A
Output Voltage 0.8 V to 5.2 V (adjustable)
Input Voltage 1.4 V to 6.5 V
Output Noise 4.7 uVrms (10Hz-100kHz)
PSRR 70 dB at DC, 40 dB at 1MHz
Dropout Voltage 200 mV (max at 1A)
Operating Temperature -40C to +125C

Features

  • 4.7uVrms ultra-low output noise for sensitive analog circuits
  • 70dB DC PSRR and 40dB at 1MHz for power rail filtering
  • 1% accuracy over line, load, and temperature
  • 200mV max dropout at 1A for efficient regulation
  • Adjustable soft-start for in-rush current control
  • Open-drain power-good (PG) output for supply monitoring

Applications

  • VCO, ADC, and DAC power supply for minimal phase noise
  • RF transceiver and PLL clean power rails
  • FPGA and SerDes core/IO voltage regulation
  • Medical imaging and test instrumentation
Product Introduction: TPS7A9101DSKR Product Introduction

The TPS7A9101DSKR from Texas Instruments is a 1A, high-accuracy, ultra-low-noise, low-dropout (LDO) voltage regulator in a WSON-10 (2.5mm x 2.5mm) package. The output voltage is adjustable from 0.8V to 5.2V using external resistors, with 1% accuracy over line, load, and temperature. The device features 4.7uVrms output noise (10Hz-100kHz) and 70dB PSRR at DC, making it ideal for powering noise-sensitive components such as VCOs, ADCs, DACs, and RF transceivers where minimal phase noise and clock jitter are critical. The wideband PSRR of 40dB at 1MHz effectively filters high-frequency switching regulator ripple. The maximum dropout voltage of 200mV at 1A enables efficient regulation from low-headroom supplies. An adjustable soft-start feature with selectable charging current controls in-rush current during startup. The open-drain power-good (PG) output provides supply monitoring for downstream circuitry.

Working Principle: TPS7A9101DSKR Working Principle

The TPS7A9101DSKR uses a PMOS pass element with advanced BiCMOS error amplifier for ultra-low-noise regulation. (1) Pass Element: A P-channel MOSFET provides the low 200mV dropout at 1A. The PMOS gate is driven by a high-gain error amplifier that compares a fraction of the output voltage to an internal 0.8V bandgap reference. (2) Noise Reduction: An external capacitor (CNR/SS) on the NR/SS pin filters the bandgap reference noise, reducing the output noise from approximately 12uVrms (without CNR) to 4.7uVrms (with 100nF CNR). This is critical for achieving sub-5uVrms noise performance. (3) PSRR: The high loop gain of the error amplifier provides 70dB PSRR at DC. The wideband PSRR of 40dB at 1MHz is achieved by the high bandwidth of the regulation loop. A feed-forward capacitor (CFF) across the top feedback resistor further improves high-frequency PSRR. (4) Soft-Start: The NR/SS pin also serves as the soft-start control. The external capacitor controls the reference voltage ramp-up rate, limiting in-rush current. (5) PG: The open-drain power-good output asserts when the output voltage reaches 90% of the target value.

Pin Description: TPS7A9101DSKR Pin Definition and Functions
Pin Name Type Function
1 OUT Output Regulated output voltage
2 OUT Output Regulated output voltage
3 PG Output Power-good (open-drain)
4 SS_CTRL Input Soft-start current select (GND=fast, float=slow)
5 EN Input Enable (active high)
6 NR/SS Analog Noise reduction / soft-start capacitor
7 FB Input Feedback voltage (0.8V reference)
8 GND Ground Ground
9 IN Input Input supply (1.4-6.5V)
10 IN Input Input supply (1.4-6.5V)
Application Scenarios: In which products and applications is TPS7A9101DSKR used
  • VCO, ADC, and DAC power supply with 4.7uVrms noise for minimal phase noise
  • RF transceiver and PLL clean power rails with 70dB PSRR at DC
  • FPGA and SerDes core/IO voltage regulation at 1A with 200mV dropout
  • Medical imaging and test instrumentation with 1% output accuracy
Alternative Models: What chips are recommended as replacements for TPS7A9101DSKR
Manufacturer Part Number Package Notes
TI TPS7A9101DSKT WSON-10 Small reel packaging
TI TPS7A8101SKDR SON-8 1A, 23.5uVrms noise
ADI LT3045EMSE-1#PBF MSOP-10 500mA, 0.8uVrms noise
TI TPS7A4700RGWR VQFN-20 1A, 3.8uVrms, higher PSRR

Recommend Parts

TMP275AIDR

0.5C I2C temp sensor, 12-bit, 2.7-5.5V, alert output, 8-SOIC

Brand: TI

Package: 8-SOIC (4.90 x 3.91 x 1.50 mm)

IN STOCK: 3681pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IL485E

NVE IL485E IsoLoop isolated RS-485 transceiver, 2.5kVrms isolation, 35Mbps, 16-SOIC WB

Brand: nve

Package: SOIC-16 WB

IN STOCK: 5280pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFS4227TRLPBF

IRFS4227TRLPBF – 200V N-Channel HEXFET PDP Switch Power MOSFET, 26 mΩ RDS(on), D2PAK (TO-263)

Brand: infineon

Package: D2PAK (TO-263)

IN STOCK: 4334pcs

Cargo cycle: 3-7 Days

The minimum order is 1

CD4070BM96

Quad 2-input XOR gate, 3-18V CMOS, 65ns at 10V, SOIC-14

Brand: TI

Package: SOIC-14 (8.75 x 3.9 x 1.5mm)

IN STOCK: 4245pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AB1526

Bluetooth 5.0 Dual Mode Audio SoC, TWS, AAC, Dual-mic ENC, Integrated Charger, BGA

Brand: airoha

Package: BGA

IN STOCK: 25000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

LP2980IM5-5.0

50mA micropower ultra-low-dropout regulator, 5V, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.1 mm)

IN STOCK: 2557pcs

Cargo cycle: 3-7 Days

The minimum order is 1