Opens in a new tab

STB6NK90ZT4

N-ch 900V MOSFET, 1.56Ohm RDS(on), 5.8A, SuperMESH, D2PAK, avalanche rated, PFC/SMPS

11517

Effective Inventory

Image for reference only

Manufacturer Part:

STB6NK90ZT4

Package:

D2PAK (TO-263-2) (10.16 x 8.40 x 4.60 mm)

Brand:

Product Categories:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The STB6NK90ZT4 from STMicroelectronics is an N-channel 900V SuperMESH power MOSFET with 1.56 Ohm typical RDS(on) in a D2PAK package. Rated at 5.8A continuous drain current with 300mJ avalanche energy, it targets offline SMPS and PFC boost converter applications.

Key Specifications

VDS (Drain-Source) 900 V
RDS(on) (typical) 1.56 Ohm @ VGS=10V
ID (continuous) 5.8 A @ TC=25C
EAS (avalanche) 300 mJ
Qg (total gate charge) 46.5 nC (typical)
VGS(th) 3.0V to 4.5V
Operating Temperature -55C to +150C

Features

  • 900V drain-source voltage for offline PFC and SMPS applications
  • 1.56 Ohm typical RDS(on) with SuperMESH technology
  • 100% avalanche tested for rugged switching operation
  • Zener gate protection for ESD robustness
  • Low 46.5nC total gate charge for efficient switching
  • D2PAK surface-mount package with 140W power dissipation

Applications

  • Offline switch-mode power supplies (SMPS)
  • PFC boost converters in power factor correction stages
  • Motor drive inverters for industrial applications
  • Lighting ballast and LED driver converters
Product Introduction: STB6NK90ZT4 Product Introduction

The STB6NK90ZT4 from STMicroelectronics is an N-channel 900V SuperMESH power MOSFET in a D2PAK (TO-263) surface-mount package. Using ST’s SuperMESH technology, the device achieves 1.56 Ohm typical RDS(on) at VGS=10V with a low 46.5nC total gate charge, providing an excellent figure of merit for high-voltage switching applications. The device is rated for 5.8A continuous drain current at TC=25C and 3.65A at TC=100C. The 300mJ single-pulse avalanche energy rating ensures ruggedness during unclamped inductive switching events. Gate-source Zener protection provides ESD robustness. The D2PAK package enables 140W power dissipation at TC=25C with a junction-to-case thermal resistance of 0.89C/W. The device is 100% avalanche tested and targeted for offline switch-mode power supplies, PFC boost converters, motor drive inverters, and lighting ballast applications.

Working Principle: STB6NK90ZT4 Working Principle

The STB6NK90ZT4 uses ST’s SuperMESH vertical DMOS technology for high-voltage power switching. (1) Cell Structure: The SuperMESH process uses a striped cell geometry with optimized pitch to minimize the specific on-resistance (RDS(on) x Area). The vertical current flow from drain (substrate) through the drift region and channel to the source provides high blocking voltage and low conduction loss. (2) Drift Region: The 900V blocking capability is achieved through a lightly-doped epitaxial drift layer. The drift layer thickness and doping are optimized to support the electric field during off-state while minimizing resistance during on-state. (3) Gate Charge: The 46.5nC total gate charge includes Qgs (8.5nC) for channel inversion and Qgd (25nC) for Miller plateau. The low Qgd minimizes switching losses in hard-switched applications. (4) Avalanche: When the drain voltage exceeds V(BR)DSS, the device enters avalanche breakdown. The 300mJ energy rating ensures the device can absorb inductive kickback energy without failure. (5) Zener Protection: Integrated gate-source Zener diodes clamp gate voltage transients to +/-20V, protecting the thin gate oxide from ESD damage.

Pin Description: STB6NK90ZT4 Pin Definition and Functions
Pin Name Type Function
1 Gate Input MOSFET gate (Zener protected)
2 Drain Output MOSFET drain (tab/heat sink)
3 Source Output MOSFET source
Application Scenarios: In which products and applications is STB6NK90ZT4 used
  • Offline SMPS primary switch at 900V with 1.56Ohm RDS(on)
  • PFC boost converters in CCM/CRM with 300mJ avalanche rating
  • Motor drive inverters for industrial applications with Zener gate protection
  • Lighting ballast and LED driver converters at 5.8A continuous current
Alternative Models: What chips are recommended as replacements for STB6NK90ZT4
Manufacturer Part Number Package Notes
ST STP6NK90Z TO-220 Through-hole version
Infineon IPD60R900P7S D2PAK 900V, 0.9Ohm, CoolMOS
onsemi FCPF099N65S3 D2PAK 650V SuperFET, lower voltage
ST STW11NM80 TO-247 800V, higher power

Recommend Parts

IRFS4310ZTRLPBF

IRFS4310ZTRLPBF – 100V N-Channel HEXFET Power MOSFET, 7 mΩ RDS(on), D2PAK (TO-263AB)

Brand: infineon

Package: D2PAK (TO-263AB)

IN STOCK: 11137pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MSASJ105BB5475MFNA01

4.7uF 6.3V X5R MLCC, 0402, Taiyo Yuden

Brand: gigadevice

Package: 0402 (1005 Metric, 1.0 x 0.5 x 0.5 mm)

IN STOCK: 9701pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRF3415PBF

150V N-channel power MOSFET, 43A, 41mΩ RDS(on), TO-220AB package

Brand: infineon

Package: TO-220AB

IN STOCK: 2940pcs

Cargo cycle: 3-7 Days

The minimum order is 1

105017-1001

USB Type-C receptacle connector, 24-pin, SMD

Brand: Amphenol

Package: SMD (8.9 x 7.3 x 3.2 mm, right angle)

IN STOCK: 5335pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRLB3034PBF

IRLB3034PBF – 40V N-Channel StrongIRFET Power MOSFET (Logic Level), 1.7 mΩ (max) @ 10V; 2.0 mΩ @ 4.5V RDS(on), TO-220AB

Brand: infineon

Package: TO-220AB

IN STOCK: 9724pcs

Cargo cycle: 3-7 Days

The minimum order is 1

XC6SLX75-2FGG484I

Spartan-6 LX75 FPGA, 74637 logic cells, 132 DSP, 3096KB BRAM, 408 I/O, FBGA-484 23x23mm, -2 speed, industrial -40~100C, AMD Xilinx

Brand: xilinx

Package: FGG484 (484-ball fine-pitch BGA, 23x23mm body, 1.0mm ball pitch, 22×22 ball array, 6 I/O banks, lead-free)

IN STOCK: 890pcs

Cargo cycle: 3-7 Days

The minimum order is 1