Opens in a new tab

Home » Integrated Circuits ICs » HEF40106BT

HEF40106BT

Hex inverting Schmitt trigger, 3-15V, hysteresis, SOIC-14, CMOS 4000B, wave shaping

4300

Effective Inventory

Image for reference only

Manufacturer Part:

HEF40106BT

Package:

SOIC-14 (8.65 x 3.90 x 1.50 mm)

Brand:

Product Categories:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The HEF40106BT from Nexperia is a hex inverting Schmitt trigger in a SOIC-14 package. Part of the HEF4000B CMOS logic family, it provides six independent Schmitt-trigger inverters for wave shaping, noise immunity, and oscillator applications from 3V to 15V supply.

Key Specifications

Function Hex inverting Schmitt trigger
Supply Voltage 3 V to 15 V
Propagation Delay 60 ns (typ at 15V)
Hysteresis (VH) 0.9V typ (at 5V), 2.0V typ (at 10V)
Output Current +/-3.4 mA (min at 5V)
Operating Temperature -40C to +125C

Features

  • Six independent Schmitt-trigger inverters in one package
  • Wide 3V to 15V supply voltage range for flexible design
  • Schmitt trigger hysteresis for high noise immunity
  • Square up slowly changing waveforms for clean logic edges
  • CMOS low power dissipation with 1uA max quiescent current
  • Input clamp diodes for overvoltage interface protection

Applications

  • Waveform squaring and pulse shaping circuits
  • Astable and monostable multivibrator oscillators
  • Noisy signal conditioning and debounce circuits
  • Level translation and signal conditioning in digital systems
Product Introduction: HEF40106BT Product Introduction

The HEF40106BT from Nexperia is a hex inverting Schmitt trigger in a SOIC-14 package, belonging to the HEF4000B CMOS logic family. The device contains six independent inverting buffers, each with Schmitt-trigger input discrimination. The Schmitt trigger action provides different switching thresholds for positive-going and negative-going input signals, creating hysteresis that significantly improves noise immunity compared to standard inverters. The hysteresis voltage is typically 0.9V at 5V supply and 2.0V at 10V supply. This makes the HEF40106BT ideal for squaring slowly changing or noisy input waveforms into clean digital output signals. The device operates from 3V to 15V supply with CMOS low power dissipation and 1uA maximum quiescent current. Input clamp diodes enable interfacing with voltages exceeding VDD when used with current-limiting resistors. The 60ns typical propagation delay at 15V supports moderate-speed logic applications. The device is specified from -40C to +125C and complies with JEDEC standard JESD 13-B.

Working Principle: HEF40106BT Working Principle

The HEF40106BT uses CMOS Schmitt trigger inverters with hysteresis. (1) Schmitt Trigger: Each inverter has two different threshold voltages: VT+ (positive-going threshold) and VT- (negative-going threshold). When the input rises above VT+, the output switches low. When the input falls below VT-, the output switches high. The difference between VT+ and VT- is the hysteresis voltage VH. (2) Hysteresis Benefit: The hysteresis creates a dead band where input noise cannot cause multiple output transitions. For a slowly rising input with noise, the output switches only once when the input crosses VT+, and does not switch back until the input falls below VT-. This is essential for debouncing mechanical switches and conditioning noisy sensor signals. (3) Oscillator: Connecting the output back to the input through an RC network creates a simple astable oscillator. The capacitor charges through the resistor until the input reaches VT+, then the output switches low and the capacitor discharges until the input reaches VT-, creating continuous oscillation. The frequency is determined by the RC time constant and the hysteresis values. (4) CMOS Output: The complementary CMOS output stage provides rail-to-rail output swing with symmetrical source and sink current capability of +/-3.4mA minimum at 5V.

Pin Description: HEF40106BT Pin Definition and Functions
Pin Name Type Function
1 1A Input Inverter 1 input (Schmitt)
2 1Y Output Inverter 1 output
3 2A Input Inverter 2 input (Schmitt)
4 2Y Output Inverter 2 output
5 3A Input Inverter 3 input (Schmitt)
6 3Y Output Inverter 3 output
7 VSS Ground Ground (0V)
8 4Y Output Inverter 4 output
9 4A Input Inverter 4 input (Schmitt)
10 5Y Output Inverter 5 output
11 5A Input Inverter 5 input (Schmitt)
12 6Y Output Inverter 6 output
13 6A Input Inverter 6 input (Schmitt)
14 VDD Power Supply voltage (3-15V)
Application Scenarios: In which products and applications is HEF40106BT used
  • Waveform squaring and pulse shaping circuits with Schmitt hysteresis
  • Astable multivibrator oscillators using single RC feedback network
  • Noisy signal conditioning and mechanical switch debounce circuits
  • Level translation and signal conditioning in 3-15V digital systems
Alternative Models: What chips are recommended as replacements for HEF40106BT
Manufacturer Part Number Package Notes
TI CD40106BE DIP-14 Through-hole equivalent
onsemi MC74HC14ADR2G SOIC-14 HC family, 2-6V, faster
TI SN74HC14DR SOIC-14 HC family, 2-6V
Nexperia 74LVC14AD SOIC-14 LVC family, 1.65-3.6V

Recommend Parts

RK73H1ETTP20R0F

20Ohm +/-1% 0.063W thick film resistor, 0402, +/-100 ppm/C, AEC-Q200

Brand: KOA Speer

Package: 0402 (1005 Metric) 1.0 x 0.5 x 0.35 mm

IN STOCK: 33180pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS77001DBVR

50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

IN STOCK: 5000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS61021ADSGR

3A synchronous boost converter, 1.8-5.5V, VSSOP-8

Brand: TI

Package: VSSOP-8 (3.0 x 3.0 mm, DSG package)

IN STOCK: 12398pcs

Cargo cycle: 3-7 Days

The minimum order is 1

S1MB-13-F

1A 1000V GPP rectifier, 1.1V VF, 3μs trr, SMB/DO-214AA, -65~150°C

Brand: Diodes Inc

Package: SMB / DO-214AA (4.57 x 3.94 x 2.50mm)

IN STOCK: 3679pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADUM5000ARWZ-RL

500mW isolated DC-DC converter, 3.3/5V, SOIC-16W

Brand: ADI

Package: SOIC-16W (10.3 x 7.5 mm, RW package)

IN STOCK: 6373pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADS830E/2K5

8-bit 60MSPS high-speed ADC, TSSOP-24

Brand: TI

Package: TSSOP-24 (7.8 x 4.4 mm)

IN STOCK: 9357pcs

Cargo cycle: 3-7 Days

The minimum order is 1