Opens in a new tab

GRM188R71C104KA01D

0.1uF 16V X7R MLCC, 0603, +/-10%, decoupling, Murata GRM series

3336

Effective Inventory

Image for reference only

Manufacturer Part:

GRM188R71C104KA01D

Package:

0603 (1.60 x 0.80 x 0.80 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The GRM188R71C104KA01D from Murata is a 0.1uF, 16V, +/-10% X7R multilayer ceramic capacitor (MLCC) in a 0603 package. With stable temperature characteristics (+/-10% over -55C to +125C), it is the industry-standard decoupling capacitor for digital ICs.

Key Specifications

Capacitance 0.1 uF (100 nF)
Rated Voltage 16 V DC
Tolerance +/-10% (K)
Temperature Characteristic X7R (+/-10% over -55C to +125C)
Dissipation Factor 2.5% (max at 1kHz, 1Vrms)
Insulation Resistance 10 GOhm-uF (min)

Features

  • 0.1uF industry-standard decoupling capacitance value
  • X7R temperature characteristic for stable capacitance over temperature
  • 16V rating suitable for 3.3V and 5V power rails
  • 0603 compact footprint for high-density PCB layout
  • Low ESR and ESL for effective high-frequency decoupling
  • Murata GRM series with proven reliability and quality

Applications

  • Power supply decoupling for digital ICs and microcontrollers
  • Noise filtering on signal lines and I/O interfaces
  • Timing capacitor for RC oscillators and delay circuits
  • AC coupling and DC blocking in signal paths
Product Introduction: GRM188R71C104KA01D Product Introduction

The GRM188R71C104KA01D from Murata is a 0.1uF (100nF), 16V DC, +/-10% tolerance, X7R multilayer ceramic capacitor (MLCC) in a 0603 (1608 metric) surface-mount package. The 0.1uF value is the most widely used decoupling capacitance in digital electronics, placed near IC power pins to provide local charge storage and suppress supply voltage transients. The X7R dielectric provides capacitance stability of +/-10% over the full -55C to +125C temperature range, ensuring consistent decoupling performance across operating conditions. The 16V DC rating provides adequate margin for 3.3V and 5V power rails. The 0603 package size offers an optimal balance between miniaturization and PCB assembly ease. The MLCC construction provides inherently low equivalent series resistance (ESR) and low equivalent series inductance (ESL), enabling effective high-frequency noise suppression above 10MHz. Murata’s GRM series is one of the industry’s most widely specified MLCC product lines with extensive qualification data.

Working Principle: GRM188R71C104KA01D Working Principle

The GRM188R71C104KA01D uses X7R dielectric ceramic layers for energy storage. (1) MLCC Structure: Multiple thin layers of X7R ceramic dielectric are interleaved with inner electrode layers (typically nickel). The alternating electrodes connect to opposite terminations, creating many parallel capacitor cells within a single package. More layers and thinner dielectric layers increase capacitance in a given volume. (2) X7R Dielectric: The X7R formulation is based on barium titanate (BaTiO3) with additives to stabilize the capacitance over temperature. The ‘X7R’ designation means: X = -55C low temperature, 7 = +125C high temperature, R = +/-10% capacitance change over that range. (3) Decoupling: At high frequencies (above 10MHz), the MLCC’s low ESR and ESL provide a low-impedance path for transient current demands from the IC. The capacitor acts as a local energy reservoir, supplying charge during fast current transients and preventing supply voltage droop. (4) DC Bias Effect: X7R capacitors exhibit capacitance reduction with applied DC voltage due to the ferroelectric nature of barium titanate. At 16V rated voltage, the effective capacitance at full rated voltage may be 30-50% lower than the nominal value.

Pin Description: GRM188R71C104KA01D Pin Definition and Functions
Pin Name Type Function
1 Terminal 1 Termination Capacitor terminal (no polarity)
2 Terminal 2 Termination Capacitor terminal (no polarity)
Application Scenarios: In which products and applications is GRM188R71C104KA01D used
  • Power supply decoupling for digital ICs and microcontrollers at 0.1uF
  • Noise filtering on signal lines and I/O interfaces with low ESR/ESL
  • Timing capacitor for RC oscillators and delay circuits in 0603 footprint
  • AC coupling and DC blocking in signal paths with X7R stability
Alternative Models: What chips are recommended as replacements for GRM188R71C104KA01D
Manufacturer Part Number Package Notes
Samsung CL10B104KB8NNNC 0603 0.1uF 50V, equivalent
TDK C1608X7R1C104K080AC 0603 0.1uF 16V, equivalent
Yageo CC0603KRX7R9BB104 0603 0.1uF 50V, equivalent
KEMET C0603C104K5RACTU 0603 0.1uF 50V, equivalent

Recommend Parts

RK73H1ETTP20R0F

20Ohm +/-1% 0.063W thick film resistor, 0402, +/-100 ppm/C, AEC-Q200

Brand: KOA Speer

Package: 0402 (1005 Metric) 1.0 x 0.5 x 0.35 mm

IN STOCK: 33180pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS77001DBVR

50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

IN STOCK: 5000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS61021ADSGR

3A synchronous boost converter, 1.8-5.5V, VSSOP-8

Brand: TI

Package: VSSOP-8 (3.0 x 3.0 mm, DSG package)

IN STOCK: 12398pcs

Cargo cycle: 3-7 Days

The minimum order is 1

S1MB-13-F

1A 1000V GPP rectifier, 1.1V VF, 3μs trr, SMB/DO-214AA, -65~150°C

Brand: Diodes Inc

Package: SMB / DO-214AA (4.57 x 3.94 x 2.50mm)

IN STOCK: 3679pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADUM5000ARWZ-RL

500mW isolated DC-DC converter, 3.3/5V, SOIC-16W

Brand: ADI

Package: SOIC-16W (10.3 x 7.5 mm, RW package)

IN STOCK: 6373pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADS830E/2K5

8-bit 60MSPS high-speed ADC, TSSOP-24

Brand: TI

Package: TSSOP-24 (7.8 x 4.4 mm)

IN STOCK: 9357pcs

Cargo cycle: 3-7 Days

The minimum order is 1