Opens in a new tab

IS42S16160G-7TLI

16Mbit SDRAM, 1Mx16, 143MHz CL3, 3.3V, TSOP-54, 4-bank, industrial temp

8909

Effective Inventory

Image for reference only

Manufacturer Part:

IS42S16160G-7TLI

Package:

TSOP-54 (22.00 x 8.58 x 1.20 mm, 0.50mm pitch)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The IS42S16160G-7TLI from ISSI is a 16Mbit (1Mx16) synchronous DRAM (SDRAM) in a TSOP-54 package. Operating at 143MHz (CL3) with 3.3V supply, it provides high-speed volatile memory for embedded processing and buffering applications.

Key Specifications

Memory Size 16 Mbit (1,048,576 x 16 bit)
Organization 1M words x 16 bits x 4 banks
Clock Frequency 143 MHz (max, CL3)
Supply Voltage 3.3 V (+/-0.3V)
Access Time 7 ns (CL3)
Operating Temperature -40C to +85C (industrial)

Features

  • 16Mbit SDRAM organized as 1Mx16 with 4 internal banks
  • 143MHz maximum clock rate at CAS Latency 3
  • Programmable CAS latency (2 or 3) and burst length (1/2/4/8/full)
  • Auto refresh and self refresh modes for data integrity
  • 3.3V single supply with LVCMOS-compatible I/O
  • TSOP-54 package for high-density PCB layouts

Applications

  • Embedded processor system memory and frame buffering
  • Network router and switch packet buffering
  • Industrial control system data storage
  • Consumer electronics video and audio buffering
Product Introduction: IS42S16160G-7TLI Product Introduction

The IS42S16160G-7TLI from ISSI (Integrated Silicon Solution Inc.) is a 16Mbit synchronous dynamic random access memory (SDRAM) organized as 1,048,576 words by 16 bits in a TSOP-54 package. The device features four internal banks for interleaved access, improving memory bandwidth by hiding precharge latency. The 143MHz maximum clock rate at CAS Latency 3 provides a peak bandwidth of 286MB/s. The SDRAM interface uses a command-based protocol with separate row and column addressing, enabling flexible burst access patterns. Programmable features include CAS latency (2 or 3), burst length (1, 2, 4, 8, or full page), and burst type (sequential or interleaved). Auto refresh (4096 cycles per 64ms) and self refresh modes maintain data integrity during normal and low-power operation. The 3.3V supply with LVCMOS-compatible I/O simplifies interface with standard embedded processors and FPGAs. The industrial temperature range (-40C to +85C) supports demanding embedded applications.

Working Principle: IS42S16160G-7TLI Working Principle

The IS42S16160G-7TLI uses a synchronous DRAM architecture with command-based operation. (1) Memory Array: The 16Mbit storage is organized as four banks of 262,144 words by 16 bits. Each bank has its own row decoder, column decoder, and sense amplifiers, allowing one bank to be accessed while another is being precharged (bank interleaving). (2) Synchronous Operation: All inputs are registered on the rising edge of the clock (CLK). Commands are issued on each clock cycle using the CS, RAS, CAS, WE, and DQM control signals. (3) Access Sequence: A read operation requires an ACT (row activate) command to open a row, followed by a RD (column read) command after tRCD delay. The data appears on the output after CAS latency (2 or 3 clock cycles). (4) Refresh: SDRAM cells require periodic refresh (4096 cycles every 64ms). Auto refresh performs one refresh cycle per command. Self refresh mode internally generates refresh cycles for low-power standby. (5) Burst: After the initial access, data is automatically output in a burst sequence of 1, 2, 4, 8, or full page length, maximizing bandwidth for sequential access patterns.

Pin Description: IS42S16160G-7TLI Pin Definition and Functions
Pin Name Type Function
A0-A11 Address Input Row/column/bank address (multiplexed)
BA0, BA1 Bank Input Bank select
DQ0-DQ15 Data I/O 16-bit bidirectional data bus
CLK Clock Input System clock
CKE Control Input Clock enable
CS Control Input Chip select (active low)
RAS, CAS, WE Control Input Command inputs (active low)
LDQM, UDQM Control Input Lower/upper byte data mask
Application Scenarios: In which products and applications is IS42S16160G-7TLI used
  • Embedded processor system memory and frame buffering at 143MHz
  • Network router and switch packet buffering with 4-bank interleaving
  • Industrial control system data storage with industrial temperature range
  • Consumer electronics video and audio buffering at 286MB/s bandwidth
Alternative Models: What chips are recommended as replacements for IS42S16160G-7TLI
Manufacturer Part Number Package Notes
ISSI IS42S16400G-7TLI TSOP-54 4Mx16, 64Mbit
Micron MT48LC16M16A2P-6A TSOP-54 16Mx16, equivalent
Winbond W9812G6KH-6 TSOP-54 8Mx16, 128Mbit
Alliance AS4C16M16SA-6BIN TSOP-54 1Mx16, equivalent

Recommend Parts

RK73H1ETTP20R0F

20Ohm +/-1% 0.063W thick film resistor, 0402, +/-100 ppm/C, AEC-Q200

Brand: KOA Speer

Package: 0402 (1005 Metric) 1.0 x 0.5 x 0.35 mm

IN STOCK: 33180pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS77001DBVR

50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

IN STOCK: 5000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS61021ADSGR

3A synchronous boost converter, 1.8-5.5V, VSSOP-8

Brand: TI

Package: VSSOP-8 (3.0 x 3.0 mm, DSG package)

IN STOCK: 12398pcs

Cargo cycle: 3-7 Days

The minimum order is 1

S1MB-13-F

1A 1000V GPP rectifier, 1.1V VF, 3μs trr, SMB/DO-214AA, -65~150°C

Brand: Diodes Inc

Package: SMB / DO-214AA (4.57 x 3.94 x 2.50mm)

IN STOCK: 3679pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADUM5000ARWZ-RL

500mW isolated DC-DC converter, 3.3/5V, SOIC-16W

Brand: ADI

Package: SOIC-16W (10.3 x 7.5 mm, RW package)

IN STOCK: 6373pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADS830E/2K5

8-bit 60MSPS high-speed ADC, TSSOP-24

Brand: TI

Package: TSSOP-24 (7.8 x 4.4 mm)

IN STOCK: 9357pcs

Cargo cycle: 3-7 Days

The minimum order is 1