Opens in a new tab

Home » Integrated Circuits ICs » PCA9698DGG512

PCA9698DGG512

40-bit I2C I/O expander, quasi-bidirectional, interrupt, TSSOP-56, 400kHz, 4 address pins

12511

Effective Inventory

Image for reference only

Manufacturer Part:

PCA9698DGG512

Package:

TSSOP-56 (14.00 x 6.10 x 1.10 mm, 0.50mm pitch)

Brand:

Product Categories:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The PCA9698DGG512 from NXP is a 40-bit I2C/SMBus I/O expander with interrupt and reset in a TSSOP-56 package. It provides 40 quasi-bidirectional I/O pins for GPIO expansion in systems with limited MCU pins, supporting 400kHz fast-mode I2C.

Key Specifications

I/O Channels 40 (quasi-bidirectional)
Interface I2C/SMBus (400kHz fast mode)
Address Pins 4 (A0-A3, up to 16 devices on bus)
Interrupt Output Active low, open-drain
Supply Voltage 2.3 V to 5.5 V
Operating Temperature -40C to +85C

Features

  • 40 quasi-bidirectional I/O pins for massive GPIO expansion
  • 400kHz fast-mode I2C interface with 4 address pins
  • Active-low interrupt output on input change detection
  • Hardware reset pin for initializing all I/O to input mode
  • 2.3V to 5.5V wide supply range for mixed-voltage systems
  • Input change latches for detecting input transitions

Applications

  • Industrial control panel button and LED matrix expansion
  • Server management GPIO expansion for status and control
  • Automotive body electronics switch and lamp control
  • Large-scale GPIO expansion for test and measurement equipment
Product Introduction: PCA9698DGG512 Product Introduction

The PCA9698DGG512 from NXP Semiconductors is a 40-bit I2C/SMBus I/O expander in a TSSOP-56 package. The device provides 40 quasi-bidirectional I/O pins that can be individually configured as inputs or outputs through I2C register writes. The 400kHz fast-mode I2C interface enables rapid polling and control of the I/O states. Four hardware address pins (A0-A3) allow up to 16 PCA9698 devices to share the same I2C bus, providing up to 640 I/O channels from a single MCU I2C port. An active-low interrupt output (INT) signals when any input pin changes state, enabling event-driven I/O monitoring instead of continuous polling. Input change latches capture brief input transitions that might be missed between I2C read cycles. A hardware reset (RESET) pin initializes all I/O to input mode and clears all registers. The 2.3V to 5.5V supply range supports both 3.3V and 5V systems. The quasi-bidirectional I/O design provides weak pull-up current when configured as input and strong drive when configured as output, simplifying external circuit design.

Working Principle: PCA9698DGG512 Working Principle

The PCA9698DGG512 expands I2C bus control to 40 I/O pins through register-based access. (1) I2C Interface: The MCU communicates with the PCA9698 by writing to and reading from internal registers via I2C. The 7-bit device address is formed by combining the fixed address bits with the A0-A3 pin states, supporting up to 16 devices per bus. (2) I/O Ports: The 40 I/O pins are organized as five 8-bit ports (Port 0-4). Each pin is quasi-bidirectional: when configured as input, a weak internal pull-up current source holds the pin high unless externally pulled low; when configured as output low, a strong pulldown transistor drives the pin low; when configured as output high, the weak pull-up sources a small current. (3) Registers: Configuration registers set each pin as input or output. Output port registers set the output state. Input port registers read the current pin state. Polarity inversion registers can invert the read polarity. (4) Interrupt: When any input pin changes state, the INT output is asserted low. The MCU reads the input registers to identify which pin changed, then INT is de-asserted. (5) Input Latch: Input transition latches capture changes that occur between I2C read cycles, ensuring no events are missed.

Pin Description: PCA9698DGG512 Pin Definition and Functions
Pin Name Type Function
1-8 IO0_0-IO0_7 I/O Port 0 I/O pins
9-16 IO1_0-IO1_7 I/O Port 1 I/O pins
17-24 IO2_0-IO2_7 I/O Port 2 I/O pins
25-32 IO3_0-IO3_7 I/O Port 3 I/O pins
33-40 IO4_0-IO4_7 I/O Port 4 I/O pins
41 A0 Input Address pin 0
42-44 A1-A3 Input Address pins 1-3
45 SCL Input I2C clock
46 SDA I/O I2C data
47 INT Output Interrupt output (active low, open-drain)
48 RESET Input Hardware reset (active low)
Application Scenarios: In which products and applications is PCA9698DGG512 used
  • Industrial control panel button and LED matrix expansion with 40 I/O pins
  • Server management GPIO expansion for status monitoring and control
  • Automotive body electronics switch and lamp control via I2C
  • Large-scale GPIO expansion for test and measurement equipment at 400kHz
Alternative Models: What chips are recommended as replacements for PCA9698DGG512
Manufacturer Part Number Package Notes
NXP PCAL6416APW TSSOP-24 16-bit I/O expander
NXP PCA9505DGGR TSSOP-56 40-bit, similar
TI TCA6424ARGJR UQFN-32 24-bit I/O expander
Microchip MCP23017-E/SS SSOP-28 16-bit, popular alternative

Recommend Parts

TMP275AIDR

0.5C I2C temp sensor, 12-bit, 2.7-5.5V, alert output, 8-SOIC

Brand: TI

Package: 8-SOIC (4.90 x 3.91 x 1.50 mm)

IN STOCK: 3681pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IL485E

NVE IL485E IsoLoop isolated RS-485 transceiver, 2.5kVrms isolation, 35Mbps, 16-SOIC WB

Brand: nve

Package: SOIC-16 WB

IN STOCK: 5280pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFS4227TRLPBF

IRFS4227TRLPBF – 200V N-Channel HEXFET PDP Switch Power MOSFET, 26 mΩ RDS(on), D2PAK (TO-263)

Brand: infineon

Package: D2PAK (TO-263)

IN STOCK: 4334pcs

Cargo cycle: 3-7 Days

The minimum order is 1

CD4070BM96

Quad 2-input XOR gate, 3-18V CMOS, 65ns at 10V, SOIC-14

Brand: TI

Package: SOIC-14 (8.75 x 3.9 x 1.5mm)

IN STOCK: 4245pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AB1526

Bluetooth 5.0 Dual Mode Audio SoC, TWS, AAC, Dual-mic ENC, Integrated Charger, BGA

Brand: airoha

Package: BGA

IN STOCK: 25000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

LP2980IM5-5.0

50mA micropower ultra-low-dropout regulator, 5V, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.1 mm)

IN STOCK: 2557pcs

Cargo cycle: 3-7 Days

The minimum order is 1