Opens in a new tab

STM32F103ZET6

Cortex-M3 72MHz MCU, 512KB Flash, 64KB RAM, USB/CAN, 3 ADC, 2 DAC, LQFP-144

4058

Effective Inventory

Image for reference only

Manufacturer Part:

STM32F103ZET6

Package:

LQFP-144 (20.0 x 20.0 x 1.60 mm, 0.50mm pitch)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The STM32F103ZET6 from STMicroelectronics is a high-density performance line MCU featuring an ARM Cortex-M3 core at 72MHz with 512KB Flash and 64KB SRAM in a LQFP-144 package. It includes USB, CAN, 3 ADCs, 2 DACs, and 13 communication interfaces.

Key Specifications

Core ARM Cortex-M3, 72 MHz
Flash Memory 512 KB
SRAM 64 KB
I/O Pins 112 (5V-tolerant)
ADC 3 x 12-bit, 1us, up to 21 channels
DAC 2 x 12-bit
Communication USB 2.0 FS, CAN 2.0B, 5x USART, 3x SPI, 2x I2C, SDIO
Supply Voltage 2.0 V to 3.6 V
Operating Temperature -40C to +85C

Features

  • 72MHz Cortex-M3 with 1.25 DMIPS/MHz performance
  • 512KB Flash with 64KB SRAM and FSMC for external memory
  • 3 x 12-bit ADC with up to 21 channels and triple-sample-and-hold
  • 2 x 12-bit DAC for analog waveform generation
  • USB 2.0 full-speed, CAN 2.0B active, and SDIO interfaces
  • 11 timers including motor-control PWM with dead-time generation

Applications

  • Motor drives and industrial inverter control
  • Medical and handheld equipment
  • PLC and industrial automation
  • GPS platforms and consumer electronics
Product Introduction: STM32F103ZET6 Product Introduction

The STM32F103ZET6 from STMicroelectronics is a high-density performance line 32-bit microcontroller based on the ARM Cortex-M3 core operating at up to 72MHz. The device integrates 512KB of Flash memory and 64KB of SRAM, connected to the CPU via a multi-AHB bus matrix for zero-wait-state access. An ART Accelerator enables 1.25 DMIPS/MHz performance with single-cycle multiplication and hardware division. The peripheral set includes three 12-bit ADCs (up to 21 channels total, 1us conversion time), two 12-bit DACs, 12-channel DMA controller, and 11 timers including two motor-control PWM timers with dead-time generation and emergency stop. Communication interfaces include USB 2.0 full-speed device, CAN 2.0B active, five USARTs, three SPIs (two with I2S), two I2Cs, and SDIO. A Flexible Static Memory Controller (FSMC) supports external SRAM, PSRAM, NOR, and NAND flash. The 112 I/O pins are nearly all 5V-tolerant and mappable to 16 external interrupt vectors. The device operates from 2.0V to 3.6V with Sleep, Stop, and Standby low-power modes, plus VBAT supply for RTC and backup registers.

Working Principle: STM32F103ZET6 Working Principle

The STM32F103ZET6 is based on the ARM Cortex-M3 32-bit RISC processor core. (1) Core: The Cortex-M3 executes Thumb-2 instructions, providing a balance of 32-bit performance with 16-bit code density. The Nested Vectored Interrupt Controller (NVIC) supports up to 60 maskable interrupt channels with 16 priority levels and tail-chaining for low-latency interrupt handling. (2) Memory Bus: The multi-AHB bus matrix connects the CPU, DMA controllers, and USB to Flash, SRAM, FSMC, and peripheral bridges. The 12-channel DMA offloads data transfer from the CPU. (3) Clock System: A PLL multiplies the 4-16MHz external crystal or 8MHz internal RC to generate the 72MHz system clock. Multiple clock domains allow peripheral-specific clock gating for power optimization. (4) ADC: Three 12-bit successive-approximation ADCs can operate independently or in interleaved mode for 7.2MSPS aggregate sampling. Dual-sample-and-hold allows simultaneous sampling of multiple channels. (5) Motor Control: The advanced-control timers (TIM1, TIM8) generate complementary PWM with programmable dead-time and break input for emergency stop, directly driving motor inverter bridges.

Pin Description: STM32F103ZET6 Pin Definition and Functions
Pin Group Count Function
PORTA 16 GPIO, USART, SPI, I2C, ADC, TIM, USB
PORTB 16 GPIO, USART, SPI, I2C, TIM, ADC
PORTC 16 GPIO, USART, I2S, SDIO, ADC, TIM
PORTD 16 GPIO, FSMC, USART, TIM
PORTE 16 GPIO, FSMC, TIM, SPI
PORTF 16 GPIO, FSMC, ADC, SPI
PORTG 16 GPIO, FSMC, ADC
VDD/VSS Multiple Power supply and ground
VBAT 1 Battery backup for RTC
NRST 1 Reset (active low)
BOOT0 1 Boot mode selection
Application Scenarios: In which products and applications is STM32F103ZET6 used
  • Motor drives and industrial inverter control with motor-control PWM timers
  • Medical and handheld equipment with 512KB Flash and low-power modes
  • PLC and industrial automation with CAN and FSMC for external memory
  • GPS platforms and consumer electronics with USB and multiple USARTs
Alternative Models: What chips are recommended as replacements for STM32F103ZET6
Manufacturer Part Number Package Notes
ST STM32F103ZGT6 LQFP-144 1MB Flash, 96KB RAM
GigaDevice GD32F103ZET6 LQFP-144 Pin-compatible clone
ST STM32F407ZET6 LQFP-144 Cortex-M4, 168MHz upgrade
ST STM32F103VET6 LQFP-100 512KB, 100-pin smaller package

Recommend Parts

IRFS4310ZTRLPBF

IRFS4310ZTRLPBF – 100V N-Channel HEXFET Power MOSFET, 7 mΩ RDS(on), D2PAK (TO-263AB)

Brand: infineon

Package: D2PAK (TO-263AB)

IN STOCK: 11137pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MSASJ105BB5475MFNA01

4.7uF 6.3V X5R MLCC, 0402, Taiyo Yuden

Brand: gigadevice

Package: 0402 (1005 Metric, 1.0 x 0.5 x 0.5 mm)

IN STOCK: 9701pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRF3415PBF

150V N-channel power MOSFET, 43A, 41mΩ RDS(on), TO-220AB package

Brand: infineon

Package: TO-220AB

IN STOCK: 2940pcs

Cargo cycle: 3-7 Days

The minimum order is 1

105017-1001

USB Type-C receptacle connector, 24-pin, SMD

Brand: Amphenol

Package: SMD (8.9 x 7.3 x 3.2 mm, right angle)

IN STOCK: 5335pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRLB3034PBF

IRLB3034PBF – 40V N-Channel StrongIRFET Power MOSFET (Logic Level), 1.7 mΩ (max) @ 10V; 2.0 mΩ @ 4.5V RDS(on), TO-220AB

Brand: infineon

Package: TO-220AB

IN STOCK: 9724pcs

Cargo cycle: 3-7 Days

The minimum order is 1

XC6SLX75-2FGG484I

Spartan-6 LX75 FPGA, 74637 logic cells, 132 DSP, 3096KB BRAM, 408 I/O, FBGA-484 23x23mm, -2 speed, industrial -40~100C, AMD Xilinx

Brand: xilinx

Package: FGG484 (484-ball fine-pitch BGA, 23x23mm body, 1.0mm ball pitch, 22×22 ball array, 6 I/O banks, lead-free)

IN STOCK: 890pcs

Cargo cycle: 3-7 Days

The minimum order is 1