Opens in a new tab

STM32F103ZGT6

Cortex-M3 72MHz MCU, 1MB Flash, 96KB RAM, USB/CAN, LQFP-144, XL-density F1

9280

Effective Inventory

Image for reference only

Manufacturer Part:

STM32F103ZGT6

Package:

LQFP-144 (20.0 x 20.0 x 1.60 mm, 0.50mm pitch)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The STM32F103ZGT6 from STMicroelectronics is an XL-density performance line MCU with ARM Cortex-M3 at 72MHz, 1MB Flash and 96KB SRAM in a LQFP-144 package. The larger memory suits applications requiring extensive firmware or data buffering.

Key Specifications

Core ARM Cortex-M3, 72 MHz
Flash Memory 1 MB
SRAM 96 KB
I/O Pins 112 (5V-tolerant)
ADC 3 x 12-bit, up to 21 channels
DAC 2 x 12-bit
Communication USB 2.0 FS, CAN 2.0B, 5x USART, 3x SPI, 2x I2C, SDIO
Operating Temperature -40C to +85C

Features

  • 1MB Flash with 96KB SRAM for large firmware and data buffers
  • 14 timers including motor-control PWM with dead-time
  • USB 2.0 FS, CAN 2.0B, and SDIO interfaces
  • 3 x 12-bit ADC and 2 x 12-bit DAC
  • FSMC for external NOR/NAND/SRAM expansion
  • Same LQFP-144 pinout as STM32F103ZET6 for easy upgrade

Applications

  • Complex motor drives requiring large firmware
  • Industrial PLCs with extensive communication stacks
  • Medical imaging and diagnostic equipment
  • Consumer devices with GUI and USB connectivity
Product Introduction: STM32F103ZGT6 Product Introduction

The STM32F103ZGT6 from STMicroelectronics is an XL-density performance line 32-bit microcontroller based on the ARM Cortex-M3 core at 72MHz. Compared to the STM32F103ZET6, the ZGT6 doubles the Flash memory to 1MB and increases SRAM to 96KB, enabling more complex firmware, larger communication protocol stacks, and more extensive data buffering. The device retains all peripherals of the ZET6 variant: three 12-bit ADCs (21 channels), two 12-bit DACs, 14 timers including two motor-control PWM timers, USB 2.0 full-speed, CAN 2.0B, five USARTs, three SPIs, two I2Cs, SDIO, and FSMC for external memory expansion. The 112 I/O pins in LQFP-144 package are 5V-tolerant and pin-compatible with the ZET6, allowing a simple memory upgrade without PCB changes. The device supports Sleep, Stop, and Standby low-power modes with VBAT backup for RTC.

Working Principle: STM32F103ZGT6 Working Principle

The STM32F103ZGT6 operates identically to the STM32F103ZET6 with larger memory resources. (1) XL-Density Memory: The 1MB Flash is organized as two banks, enabling read-while-write operation where one bank can be programmed or erased while the CPU executes from the other. The 96KB SRAM is split between main SRAM (64KB) and USB SRAM (32KB shareable). (2) Same Core Peripherals: The Cortex-M3 core, NVIC, DMA, and all digital/analog peripherals function identically to the ZET6 variant. (3) FSMC: The Flexible Static Memory Controller can address up to 4 chip selects of external memory including SRAM, PSRAM, NOR, and NAND flash, useful when even 1MB internal Flash is insufficient. (4) Upgrade Path: The pin-compatible LQFP-144 package allows upgrading from ZET6 to ZGT6 on the same PCB design, requiring only firmware changes to utilize the additional memory.

Pin Description: STM32F103ZGT6 Pin Definition and Functions
Pin Group Count Function
PORTA-G 112 GPIO with alternate function mapping
VDD/VSS Multiple Power supply and ground
VBAT 1 Battery backup for RTC
NRST 1 Reset (active low)
BOOT0 1 Boot mode selection
Application Scenarios: In which products and applications is STM32F103ZGT6 used
  • Complex motor drives requiring large firmware with 1MB Flash
  • Industrial PLCs with extensive communication stacks and 96KB RAM
  • Medical imaging and diagnostic equipment with FSMC expansion
  • Consumer devices with GUI, USB, and CAN in LQFP-144 footprint
Alternative Models: What chips are recommended as replacements for STM32F103ZGT6
Manufacturer Part Number Package Notes
ST STM32F103ZET6 LQFP-144 512KB, lower cost
GigaDevice GD32F103ZGT6 LQFP-144 Pin-compatible clone, 1MB
ST STM32F407ZGT6 LQFP-144 Cortex-M4, 1MB, 168MHz
ST STM32F429ZGT6 LQFP-144 Cortex-M4, 1MB, LCD controller

Recommend Parts

IRFS4310ZTRLPBF

IRFS4310ZTRLPBF – 100V N-Channel HEXFET Power MOSFET, 7 mΩ RDS(on), D2PAK (TO-263AB)

Brand: infineon

Package: D2PAK (TO-263AB)

IN STOCK: 11137pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MSASJ105BB5475MFNA01

4.7uF 6.3V X5R MLCC, 0402, Taiyo Yuden

Brand: gigadevice

Package: 0402 (1005 Metric, 1.0 x 0.5 x 0.5 mm)

IN STOCK: 9701pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRF3415PBF

150V N-channel power MOSFET, 43A, 41mΩ RDS(on), TO-220AB package

Brand: infineon

Package: TO-220AB

IN STOCK: 2940pcs

Cargo cycle: 3-7 Days

The minimum order is 1

105017-1001

USB Type-C receptacle connector, 24-pin, SMD

Brand: Amphenol

Package: SMD (8.9 x 7.3 x 3.2 mm, right angle)

IN STOCK: 5335pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRLB3034PBF

IRLB3034PBF – 40V N-Channel StrongIRFET Power MOSFET (Logic Level), 1.7 mΩ (max) @ 10V; 2.0 mΩ @ 4.5V RDS(on), TO-220AB

Brand: infineon

Package: TO-220AB

IN STOCK: 9724pcs

Cargo cycle: 3-7 Days

The minimum order is 1

XC6SLX75-2FGG484I

Spartan-6 LX75 FPGA, 74637 logic cells, 132 DSP, 3096KB BRAM, 408 I/O, FBGA-484 23x23mm, -2 speed, industrial -40~100C, AMD Xilinx

Brand: xilinx

Package: FGG484 (484-ball fine-pitch BGA, 23x23mm body, 1.0mm ball pitch, 22×22 ball array, 6 I/O banks, lead-free)

IN STOCK: 890pcs

Cargo cycle: 3-7 Days

The minimum order is 1