Opens in a new tab

STM32F446ZET6

Cortex-M4 FPU 180MHz MCU, 512KB Flash, 128KB RAM, SAI, QuadSPI, SPDIF, LQFP-144

6675

Effective Inventory

Image for reference only

Manufacturer Part:

STM32F446ZET6

Package:

LQFP-144 (20.0 x 20.0 x 1.60 mm, 0.50mm pitch)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The STM32F446ZET6 from STMicroelectronics is a high-performance foundation line MCU with ARM Cortex-M4 with FPU at 180MHz, 512KB Flash and 128KB SRAM in LQFP-144. It includes SAI, QuadSPI, SPDIF, and dual CAN for advanced audio and connectivity.

Key Specifications

Core ARM Cortex-M4 with FPU, 180 MHz
Flash Memory 512 KB
SRAM 128 KB + 4KB backup SRAM
I/O Pins 114
ADC 3 x 12-bit, 2.4 MSPS, up to 24 channels
Communication 2x CAN, USB HS/FS, SAI x2, QuadSPI, SPDIF, I2S, SPI, USART
Supply Voltage 1.7 V to 3.6 V
Operating Temperature -40C to +85C

Features

  • 180MHz Cortex-M4 with FPU and DSP instructions for signal processing
  • ART Accelerator for zero-wait-state Flash execution at 180MHz
  • Two Serial Audio Interfaces (SAI) for I2S/TDM audio processing
  • Dual QuadSPI interface for external flash memory expansion
  • SPDIF receiver for digital audio input

Applications

  • Audio processing and streaming devices using SAI interfaces
  • Industrial motor control with FPU for sensorless algorithms
  • Consumer electronics with advanced connectivity
  • Medical instrumentation with DSP capabilities
Product Introduction: STM32F446ZET6 Product Introduction

The STM32F446ZET6 from STMicroelectronics is a high-performance foundation line 32-bit microcontroller based on the ARM Cortex-M4 core with floating-point unit (FPU) operating at up to 180MHz. The device integrates 512KB of Flash memory and 128KB of SRAM plus 4KB of backup SRAM retained in Standby mode. The ART Accelerator enables zero-wait-state execution from Flash at the full 180MHz, delivering 225 DMIPS performance. The STM32F446 uniquely features two Serial Audio Interfaces (SAI) supporting I2S, TDM, and PCM audio protocols, a SPDIF receiver for digital audio input, and dual QuadSPI interfaces for external flash memory expansion. The peripheral set also includes three 12-bit ADCs at 2.4 MSPS, two 12-bit DACs, two CAN controllers, USB 2.0 OTG HS/FS, SDIO, and 14 timers. The FPU and DSP instructions accelerate signal processing algorithms including PID control, digital filtering, and audio processing. The multi-AHB bus matrix with dual DMA controllers ensures concurrent high-speed data transfers.

Working Principle: STM32F446ZET6 Working Principle

The STM32F446ZET6 operates on the ARM Cortex-M4F core with several performance enhancements. (1) FPU: The single-precision floating-point unit executes IEEE 754 float operations in hardware, accelerating DSP algorithms by 5-10x compared to software emulation. This is critical for motor control Park/Clarke transforms, audio filters, and sensor fusion. (2) DSP Instructions: Saturating arithmetic, MAC (multiply-accumulate), and SIMD instructions enable efficient FIR/IIR filter implementations and FFT computation. (3) ART Accelerator: An instruction prefetch queue and 128-bit branch cache eliminate Flash wait states, enabling full 180MHz execution speed from 128-bit-wide Flash. (4) SAI: The Serial Audio Interface provides flexible I2S/TDM/PCM audio with independent TX and RX sub-blocks, supporting full-duplex audio streaming with independent clock domains. (5) QuadSPI: Dual QuadSPI interfaces can map external flash into the CPU address space (memory-mapped mode) for execute-in-place, or use indirect mode for data transfers, enabling virtually unlimited firmware and data storage.

Pin Description: STM32F446ZET6 Pin Definition and Functions
Pin Group Count Function
PORTA-G 114 GPIO with alternate function mapping
VDD/VSS Multiple Power supply and ground
VBAT 1 Battery backup for RTC and backup SRAM
NRST 1 Reset (active low)
BOOT0 1 Boot mode selection
Application Scenarios: In which products and applications is STM32F446ZET6 used
  • Audio processing and streaming devices using dual SAI interfaces
  • Industrial motor control with FPU for sensorless FOC algorithms at 180MHz
  • Consumer electronics with QuadSPI external flash and USB HS connectivity
  • Medical instrumentation with DSP filtering and SPDIF digital audio
Alternative Models: What chips are recommended as replacements for STM32F446ZET6
Manufacturer Part Number Package Notes
ST STM32F407ZET6 LQFP-144 No FPU, 168MHz, cheaper
ST STM32F429ZET6 LQFP-144 LCD controller, 180MHz
GigaDevice GD32F450ZET6 LQFP-144 Pin-compatible, 200MHz
ST STM32F446ZGT6 LQFP-144 1MB Flash version

Recommend Parts

IRFS4310ZTRLPBF

IRFS4310ZTRLPBF – 100V N-Channel HEXFET Power MOSFET, 7 mΩ RDS(on), D2PAK (TO-263AB)

Brand: infineon

Package: D2PAK (TO-263AB)

IN STOCK: 11137pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MSASJ105BB5475MFNA01

4.7uF 6.3V X5R MLCC, 0402, Taiyo Yuden

Brand: gigadevice

Package: 0402 (1005 Metric, 1.0 x 0.5 x 0.5 mm)

IN STOCK: 9701pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRF3415PBF

150V N-channel power MOSFET, 43A, 41mΩ RDS(on), TO-220AB package

Brand: infineon

Package: TO-220AB

IN STOCK: 2940pcs

Cargo cycle: 3-7 Days

The minimum order is 1

105017-1001

USB Type-C receptacle connector, 24-pin, SMD

Brand: Amphenol

Package: SMD (8.9 x 7.3 x 3.2 mm, right angle)

IN STOCK: 5335pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRLB3034PBF

IRLB3034PBF – 40V N-Channel StrongIRFET Power MOSFET (Logic Level), 1.7 mΩ (max) @ 10V; 2.0 mΩ @ 4.5V RDS(on), TO-220AB

Brand: infineon

Package: TO-220AB

IN STOCK: 9724pcs

Cargo cycle: 3-7 Days

The minimum order is 1

XC6SLX75-2FGG484I

Spartan-6 LX75 FPGA, 74637 logic cells, 132 DSP, 3096KB BRAM, 408 I/O, FBGA-484 23x23mm, -2 speed, industrial -40~100C, AMD Xilinx

Brand: xilinx

Package: FGG484 (484-ball fine-pitch BGA, 23x23mm body, 1.0mm ball pitch, 22×22 ball array, 6 I/O banks, lead-free)

IN STOCK: 890pcs

Cargo cycle: 3-7 Days

The minimum order is 1