Opens in a new tab

LMR16006YDDCR

60V 600mA buck converter, 1MHz, 25uA IQ, SOT-23-6, current-mode, internal compensation

7800

Effective Inventory

Image for reference only

Manufacturer Part:

LMR16006YDDCR

Package:

SOT-23-6 (2.90 x 1.60 x 1.00 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The LMR16006YDDCR from Texas Instruments is a 60V, 600mA step-down DC-DC converter in a SOT-23-6 package. With 1MHz switching frequency and 25uA IQ, it provides compact and efficient power conversion for industrial and automotive applications.

Key Specifications

Input Voltage 4.0 V to 60 V
Output Current 600 mA (max)
Switching Frequency 1 MHz
IQ (operating) 25 uA (typical)
Feedback Voltage 0.8 V (+/-1.5%)
Operating Temperature -40C to +125C

Features

  • 4V-60V wide input with integrated 1.5A/60V MOSFET
  • 1MHz switching frequency for small external components
  • 25uA ultra-low operating quiescent current
  • Current-mode control with internal compensation
  • Programmable soft start and precision enable/UVLO
  • SOT-23-6 ultra-compact footprint for space-constrained designs

Applications

  • Industrial 24V/48V bus step-down converters
  • Automotive battery-powered systems
  • Smart meter and building automation power
  • General-purpose wide-input DC-DC conversion
Product Introduction: LMR16006YDDCR Product Introduction

The LMR16006YDDCR from Texas Instruments is a 60V, 600mA step-down DC-DC converter in a SOT-23-6 package. The device integrates a 1.5A/60V N-channel MOSFET switch and operates from a 4.0V to 60V input range, making it ideal for step-down conversion from 12V, 24V, or 48V industrial buses. The 1MHz switching frequency enables the use of small external inductors and capacitors, minimizing solution footprint. The 25uA typical operating quiescent current ensures high light-load efficiency, critical for always-on battery-powered systems. Current-mode control with internal compensation simplifies design by eliminating external compensation components. The device features programmable soft start to limit inrush current, precision enable/UVLO for input voltage monitoring, and cycle-by-cycle current limit for overload protection. The 0.8V feedback voltage with +/-1.5% accuracy supports output voltages as low as 1.0V using an external resistor divider. The SOT-23-6 package is one of the smallest available for 60V buck converters, ideal for space-constrained industrial and automotive applications.

Working Principle: LMR16006YDDCR Working Principle

The LMR16006YDDCR uses peak current-mode control with integrated power MOSFET. (1) Control Loop: The error amplifier compares the feedback voltage (FB pin) to the 0.8V internal reference and generates a control voltage. This control voltage sets the peak current threshold for the power MOSFET. Each switching cycle, the MOSFET turns on and the inductor current ramps up. When the peak current reaches the threshold, the MOSFET turns off and the inductor current ramps down through the external Schottky diode. (2) Slope Compensation: Internal slope compensation prevents sub-harmonic oscillation at duty cycles above 50%, ensuring stable operation across the full input/output voltage range. (3) Internal Compensation: The error amplifier output is internally compensated, eliminating external RC networks. The compensation is optimized for typical application circuits with specific inductor and output capacitor values. (4) Low IQ Mode: At light loads, the device enters pulse-skipping mode where switching pulses are spaced apart, reducing the effective switching frequency and minimizing switching losses. The 25uA IQ keeps efficiency high even at no load. (5) Protection: Cycle-by-cycle peak current limit (typically 1.5A) protects the MOSFET during output overloads. Thermal shutdown disables the converter at approximately 170C junction temperature.

Pin Description: LMR16006YDDCR Pin Definition and Functions
Pin Name Type Function
1 BOOT Power Bootstrap capacitor for high-side gate drive
2 VIN Power Input supply (4-60V)
3 EN Input Enable / UVLO adjust
4 FB Input Feedback voltage (0.8V reference)
5 GND Ground Ground
6 SW Output Switch node (inductor connection)
Application Scenarios: In which products and applications is LMR16006YDDCR used
  • Industrial 24V/48V bus step-down converters in SOT-23-6 footprint
  • Automotive battery-powered systems with 60V input range
  • Smart meter and building automation power with 25uA IQ
  • General-purpose wide-input DC-DC conversion at 600mA/1MHz
Alternative Models: What chips are recommended as replacements for LMR16006YDDCR
Manufacturer Part Number Package Notes
TI LMR16006XDDCR SOT-23-6 2.1MHz version, smaller inductor
TI LMR16010YDDCR SOT-23-6 1A output version
MPS MP8759GD-Z QFN-12 60V, 4A, higher power
Monolithic Power MP4688GJ-Z TSOT23-6 60V, 0.5A, similar

Recommend Parts

BC857BS

Dual PNP transistor, -45V, -100mA, SOT363, Nexperia

Brand: NXP

Package: SOT363 (SC-88, 2.1 x 1.25 x 0.95 mm)

IN STOCK: 8813pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADUM1200ARZ-RL7

Dual-channel digital isolator based on ADI iCoupler technology, 2/0 direction, SOIC-8 narrow body, 1Mbps (A grade), 2.7-5.5V dual supply, 2500Vrms isolation, >25kV/us CMTI, -40C to +105C.

Package: SOIC-8 Narrow (5.06 x 3.99 x 1.75mm)

IN STOCK: 12476pcs

Cargo cycle: 3-7 Days

The minimum order is 1

PIC32MX795F512L-80I/PT

MIPS32 MCU, 80MHz, 512KB Flash, Ethernet, dual CAN, USB OTG, 100-TQFP

Brand: MICROCHIP

Package: 100-TQFP (14.0 x 14.0 x 1.0 mm)

IN STOCK: 5670pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IS61WV25616BLL-10TLI

4Mbit async SRAM, 256Kx16, 10ns, 3.3V, 44-TSOP-II Industrial

Brand: Issi

Package: 44-TSOP II

IN STOCK: 7802pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AT45DB081E-SHN-T

8Mbit DataFlash, dual-SPI 85MHz, 2x264B SRAM buffers, USON-8 (4x3mm), page-based ECC

Brand: Renesas

Package: USON-8 (4 x 3 x 0.6mm, 0.8mm pitch)

IN STOCK: 4500pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TIP35C

NPN power transistor, 100V VCEO, 25A Ic, 125W, TO-247, low saturation voltage, STMicroelectronics

Brand: ST

Package: TO-247 (through-hole, 3-pin)

IN STOCK: 11500pcs

Cargo cycle: 3-7 Days

The minimum order is 1