Opens in a new tab

TPS61251DSGR

3.5MHz sync boost, 5V/800mA, WSON-8, true shutdown, input discharge, Li-Ion to 5V

12612

Effective Inventory

Image for reference only

Manufacturer Part:

TPS61251DSGR

Package:

WSON-8 (4.00 x 4.00 x 0.80 mm, exposed pad)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The TPS61251DSGR from Texas Instruments is a 3.5MHz synchronous boost converter with 5V output and 800mA switch current in a WSON-8 package. With true shutdown and input discharge, it provides 3.3V-to-5V conversion for USB OTG and peripheral power.

Key Specifications

Input Voltage 1.9 V to 5.5 V
Output Voltage 5.0 V (fixed)
Switch Current 800 mA
Switching Frequency 3.5 MHz
Efficiency Up to 93%
Operating Temperature -40C to +85C

Features

  • 3.5MHz high-frequency switching for tiny external components
  • 5V fixed output with 800mA switch current from single-cell Li-Ion
  • True shutdown with input discharge feature
  • Average current limit for input current control
  • Synchronous rectification for high efficiency
  • WSON-8 package with exposed thermal pad

Applications

  • USB OTG 5V power supply from Li-Ion battery
  • White LED driver and flash power supply
  • Portable instrument 5V rail generation
  • Smartphone peripheral power boost
Product Introduction: TPS61251DSGR Product Introduction

The TPS61251DSGR from Texas Instruments is a 3.5MHz synchronous boost converter with a fixed 5.0V output in a WSON-8 package. The device is designed to generate a 5V rail from a single-cell Li-Ion or Li-Polymer battery (2.7V to 4.5V) for USB OTG, peripheral power, and white LED applications. The 3.5MHz switching frequency enables the use of chip-scale inductors and small ceramic capacitors, minimizing solution size. The 800mA switch current limit supports output currents up to approximately 400mA from a 3.3V input. Synchronous rectification eliminates the external Schottky diode and improves efficiency up to 93%. The true shutdown feature completely disconnects the input from the output when disabled, preventing battery drain through the inductor. An input discharge feature actively discharges the output capacitor when the device is disabled, ensuring a clean power-down sequence. Average input current limiting protects the battery from excessive discharge current. The device uses average current-mode control with internal compensation for stable operation across input voltage and load conditions.

Working Principle: TPS61251DSGR Working Principle

The TPS61251DSGR uses a synchronous boost topology with average current-mode control. (1) Boost Converter: During the on-time, the high-side switch connects the inductor to ground, ramping up inductor current. During the off-time, the low-side synchronous switch connects the inductor to the output, transferring stored energy. The output voltage is higher than the input voltage. (2) Average Current-Mode Control: An inner current loop regulates the average inductor current, while an outer voltage loop regulates the output voltage. The current loop bandwidth is higher than the voltage loop, providing fast response to input voltage transients and ensuring stable operation. Internal compensation simplifies design. (3) Synchronous Rectification: The low-side MOSFET replaces the external Schottky diode, reducing conduction losses and improving efficiency. The body diode of the low-side MOSFET conducts during the dead-time between switches. (4) True Shutdown: When disabled, both switches are off and the input is disconnected from the output through the inductor. Only a small leakage current flows from input to output. (5) Input Discharge: An internal discharge resistor is connected across the output when the device is disabled, draining the output capacitor within a few milliseconds.

Pin Description: TPS61251DSGR Pin Definition and Functions
Pin Name Type Function
1 VIN Power Input supply (1.9-5.5V)
2 L Output Inductor connection / switch node
3 PGND Ground Power ground
4 VOUT Output 5V output
5 FB Input Feedback (internal for fixed 5V)
6 EN Input Enable (active high)
7 ILIM Input Current limit programming
8 AGND Ground Analog ground
Application Scenarios: In which products and applications is TPS61251DSGR used
  • USB OTG 5V power supply from single-cell Li-Ion battery
  • White LED driver and flash power supply at 800mA switch current
  • Portable instrument 5V rail generation with true shutdown
  • Smartphone peripheral power boost with 3.5MHz compact design
Alternative Models: What chips are recommended as replacements for TPS61251DSGR
Manufacturer Part Number Package Notes
TI TPS61252YFFR DSBGA-6 5V, smaller package
TI TPS610993YFFR DSBGA-6 5V, 1A switch, ultra-small
MPS MP3414GR-Z QFN-8 5V boost, 1.5MHz
Monolithic Power MP3423AGJ-Z TSOT23-8 5V boost, 1.5A

Recommend Parts

BC857BS

Dual PNP transistor, -45V, -100mA, SOT363, Nexperia

Brand: NXP

Package: SOT363 (SC-88, 2.1 x 1.25 x 0.95 mm)

IN STOCK: 8813pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADUM1200ARZ-RL7

Dual-channel digital isolator based on ADI iCoupler technology, 2/0 direction, SOIC-8 narrow body, 1Mbps (A grade), 2.7-5.5V dual supply, 2500Vrms isolation, >25kV/us CMTI, -40C to +105C.

Package: SOIC-8 Narrow (5.06 x 3.99 x 1.75mm)

IN STOCK: 12476pcs

Cargo cycle: 3-7 Days

The minimum order is 1

PIC32MX795F512L-80I/PT

MIPS32 MCU, 80MHz, 512KB Flash, Ethernet, dual CAN, USB OTG, 100-TQFP

Brand: MICROCHIP

Package: 100-TQFP (14.0 x 14.0 x 1.0 mm)

IN STOCK: 5670pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IS61WV25616BLL-10TLI

4Mbit async SRAM, 256Kx16, 10ns, 3.3V, 44-TSOP-II Industrial

Brand: Issi

Package: 44-TSOP II

IN STOCK: 7802pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AT45DB081E-SHN-T

8Mbit DataFlash, dual-SPI 85MHz, 2x264B SRAM buffers, USON-8 (4x3mm), page-based ECC

Brand: Renesas

Package: USON-8 (4 x 3 x 0.6mm, 0.8mm pitch)

IN STOCK: 4500pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TIP35C

NPN power transistor, 100V VCEO, 25A Ic, 125W, TO-247, low saturation voltage, STMicroelectronics

Brand: ST

Package: TO-247 (through-hole, 3-pin)

IN STOCK: 11500pcs

Cargo cycle: 3-7 Days

The minimum order is 1