Opens in a new tab

BQ24075RGTR

1.5A Li-Ion charger, DPPM, VQFN-16, USB/adapter, OVP 6.4V, NTC monitor, power path

12172

Effective Inventory

Image for reference only

Manufacturer Part:

BQ24075RGTR

Package:

VQFN-16 (4.00 x 4.00 x 0.90 mm, exposed pad)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The BQ24075RGTR from Texas Instruments is a 1.5A single-cell Li-Ion battery charger and system power path management IC in a VQFN-16 package. It supports USB and adapter inputs with dynamic power path management for reliable system operation.

Key Specifications

Battery Chemistry Li-Ion / Li-Polymer (single cell)
Charge Current Up to 1.5 A (programmable)
Input Voltage 4.35 V to 6.4 V (USB/adapter)
Charge Voltage 4.2 V (default, programmable)
Power Path Dynamic power path management
Operating Temperature -40C to +85C

Features

  • 1.5A maximum charge current with USB 100mA/500mA input current limit
  • Dynamic power path management prioritizes system load over battery charging
  • Independent power path from adapter to system even with depleted battery
  • Input overvoltage protection at 6.4V for USB safety
  • Battery temperature monitoring via NTC thermistor (TS pin)
  • Charge status and power good outputs for system indication

Applications

  • Smartphone and tablet USB charging with system power
  • Portable medical device battery management
  • Industrial handheld terminals with USB/adapter dual input
  • Wearable device charging and power path management
Product Introduction: BQ24075RGTR Product Introduction

The BQ24075RGTR from Texas Instruments is a 1.5A single-cell Li-Ion/Li-Polymer battery charger with dynamic power path management (DPPM) in a VQFN-16 package. The DPPM feature independently manages the power path between the input source, the system load, and the battery, ensuring that the system always receives power even when the battery is deeply depleted. When the input source current is limited (e.g., USB 500mA), the DPPM automatically reduces the charge current to maintain system power, and only charges the battery with the remaining available current. This prevents system brownouts during USB charging. The device supports dual input sources (USB and adapter) with input overvoltage protection at 6.4V. The charge current is programmable up to 1.5A via an external resistor, with USB-specific current limit settings of 100mA and 500mA. The default charge voltage is 4.2V with +/-0.5% accuracy, and can be adjusted via an external resistor divider. Safety features include battery temperature monitoring through the TS pin with an NTC thermistor, charge safety timer, and thermal regulation that reduces charge current when the junction temperature exceeds 120C.

Working Principle: BQ24075RGTR Working Principle

The BQ24075RGTR manages three power paths: input, system, and battery. (1) Power Path Management: The input power is first used to supply the system load (SYS pin). Any remaining current is directed to charge the battery (BAT pin). When the input current is insufficient to supply both the system and the charger, the DPPM circuit reduces the charge current to maintain the system voltage above the DPPM threshold (typically VBAT + 200mV). (2) Supplement Mode: If the system load exceeds the input current capability, the battery supplements the system through an internal FET, preventing system voltage drop. (3) Charging: The charger follows CC/CV profiles: constant current (fast charge) at the programmed rate, then constant voltage at 4.2V with taper current termination. A preconditioning phase charges deeply depleted batteries at reduced current. (4) Input OVP: When the input voltage exceeds 6.4V, the input FET disconnects the source, protecting the system. (5) Thermal Regulation: If the junction temperature exceeds 120C, the charge current is reduced to limit power dissipation, preventing thermal shutdown while maintaining charging.

Pin Description: BQ24075RGTR Pin Definition and Functions
Pin Name Type Function
1 IN Power Input supply (USB/adapter)
2 PG Output Power good (open-drain)
3 CE Input Charge enable (active low)
4 ISET Input Charge current set resistor
5 TS Input Battery thermistor sense
6 BAT Output Battery connection
7 SYS Output System power output
8 CHG Output Charge status (open-drain)
Application Scenarios: In which products and applications is BQ24075RGTR used
  • Smartphone and tablet USB charging with DPPM for system reliability
  • Portable medical device battery management with NTC monitoring
  • Industrial handheld terminals with USB/adapter dual input and OVP
  • Wearable device charging and power path management at 1.5A
Alternative Models: What chips are recommended as replacements for BQ24075RGTR
Manufacturer Part Number Package Notes
TI BQ24072RGTR VQFN-16 1.5A, no DPPM, lower cost
TI BQ24133RGYR VQFN-16 2.5A, higher current
MPS MP2617GR-Z QFN-20 1-6S, stand-alone
TI BQ24074RGTR VQFN-16 Similar, different OVP threshold

Recommend Parts

BC857BS

Dual PNP transistor, -45V, -100mA, SOT363, Nexperia

Brand: NXP

Package: SOT363 (SC-88, 2.1 x 1.25 x 0.95 mm)

IN STOCK: 8813pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADUM1200ARZ-RL7

Dual-channel digital isolator based on ADI iCoupler technology, 2/0 direction, SOIC-8 narrow body, 1Mbps (A grade), 2.7-5.5V dual supply, 2500Vrms isolation, >25kV/us CMTI, -40C to +105C.

Package: SOIC-8 Narrow (5.06 x 3.99 x 1.75mm)

IN STOCK: 12476pcs

Cargo cycle: 3-7 Days

The minimum order is 1

PIC32MX795F512L-80I/PT

MIPS32 MCU, 80MHz, 512KB Flash, Ethernet, dual CAN, USB OTG, 100-TQFP

Brand: MICROCHIP

Package: 100-TQFP (14.0 x 14.0 x 1.0 mm)

IN STOCK: 5670pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IS61WV25616BLL-10TLI

4Mbit async SRAM, 256Kx16, 10ns, 3.3V, 44-TSOP-II Industrial

Brand: Issi

Package: 44-TSOP II

IN STOCK: 7802pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AT45DB081E-SHN-T

8Mbit DataFlash, dual-SPI 85MHz, 2x264B SRAM buffers, USON-8 (4x3mm), page-based ECC

Brand: Renesas

Package: USON-8 (4 x 3 x 0.6mm, 0.8mm pitch)

IN STOCK: 4500pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TIP35C

NPN power transistor, 100V VCEO, 25A Ic, 125W, TO-247, low saturation voltage, STMicroelectronics

Brand: ST

Package: TO-247 (through-hole, 3-pin)

IN STOCK: 11500pcs

Cargo cycle: 3-7 Days

The minimum order is 1