Opens in a new tab

MAX31865ATP

RTD-to-digital converter, PT100/PT1000, 15-bit, SPI, TQFN-20, 2/3/4-wire, fault detect

8971

Effective Inventory

Image for reference only

Manufacturer Part:

MAX31865ATP

Package:

TQFN-20 (5.00 x 5.00 x 0.80 mm, 0.65mm pitch, exposed pad)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The MAX31865ATP from Maxim Integrated (now Analog Devices) is an RTD-to-digital converter in a TQFN-20 package. It simplifies precision temperature measurement using PT100/PT1000/PT500 RTD sensors with 15-bit resolution and SPI interface.

Key Specifications

RTD Type PT100, PT1000, PT500
Resolution 15-bit (0.03C for PT100)
Accuracy +/-0.5C (RTD accuracy dependent)
Interface SPI (up to 5MHz)
Excitation Current Programmable (0.5mA, 1mA, 2mA)
Operating Temperature -40C to +125C

Features

  • Supports PT100, PT500, and PT1000 RTD sensors with automatic conversion
  • 15-bit ADC resolution for 0.03C temperature resolution (PT100)
  • Programmable excitation current to match RTD type and wiring
  • SPI interface for easy MCU integration at up to 5MHz
  • Automatic RTD and fault detection with open/short circuit alerts
  • 2-wire, 3-wire, and 4-wire RTD connection support

Applications

  • Industrial temperature measurement with PT100/PT1000 RTDs
  • Medical temperature monitoring and calibration
  • Food processing and cold chain temperature logging
  • Scientific instrumentation and laboratory equipment
Product Introduction: MAX31865ATP Product Introduction

The MAX31865ATP from Maxim Integrated (now Analog Devices) is a dedicated RTD-to-digital converter that simplifies precision temperature measurement using platinum RTD sensors. The device integrates a precision excitation current source, a 15-bit delta-sigma ADC, and all necessary signal conditioning to convert the RTD resistance directly to a digital value accessible via SPI. Supporting PT100, PT500, and PT1000 RTD types with 2-wire, 3-wire, and 4-wire connection configurations, the device accommodates various sensor installations from simple to high-precision. The programmable excitation current (0.5mA, 1mA, or 2mA) optimizes the voltage drop across the RTD for the ADC range while minimizing self-heating. The 15-bit ADC provides 0.03C resolution for PT100 sensors, enabling precise temperature control and monitoring. An internal reference resistor sets the conversion ratio, and the SPI interface (up to 5MHz) provides easy readout of the RTD resistance ratio. Built-in fault detection circuitry identifies open or shorted RTD connections, RTD out-of-range conditions, and reference resistor faults, providing diagnostic information for system reliability.

Working Principle: MAX31865ATP Working Principle

The MAX31865ATP uses a ratiometric measurement technique for RTD-to-digital conversion. (1) Excitation: A programmable precision current source drives current through the RTD sensor. The current also flows through a precision reference resistor (RREF) connected between the RTDI and RTDIN- pins. (2) Ratiometric ADC: The delta-sigma ADC measures the voltage across the RTD (RTDIN+ to RTDIN-) and the voltage across the reference resistor (REFIN+ to REFIN-). Since both voltages are proportional to the same excitation current, the ratio RTD/RREF is independent of the exact current value. This eliminates errors from excitation current drift. (3) Conversion: The 15-bit ADC provides a digital output proportional to the RTD resistance. The RTD resistance is calculated as RRTD = (ADC_Code / 2^15) x RREF. Temperature is then derived from the RTD resistance using the Callendar-Van Dusen equation or a lookup table. (4) Wire Compensation: For 3-wire RTDs, the device measures the lead resistance during one phase and compensates. For 4-wire RTDs, Kelvin sensing eliminates lead resistance effects entirely. (5) Fault Detection: The device monitors for open RTD (no current flow), shorted RTD (zero resistance), and reference resistor faults, reporting these via the fault register.

Pin Description: MAX31865ATP Pin Definition and Functions
Pin Name Type Function
1 CLK Input SPI clock
2 DIN Input SPI data input
3 DOUT Output SPI data output
4 CS Input Chip select (active low)
5 DRDY Output Data ready (active low)
6 RTDIN+ Input RTD positive input
7 RTDIN- Input RTD negative input
8 REFIN+ Input Reference resistor positive
9 REFIN- Input Reference resistor negative
10 RTDI Output RTD excitation current output
Application Scenarios: In which products and applications is MAX31865ATP used
  • Industrial temperature measurement with PT100/PT1000 RTDs at 0.03C resolution
  • Medical temperature monitoring and calibration with fault detection
  • Food processing and cold chain temperature logging with 3-wire compensation
  • Scientific instrumentation and laboratory equipment with 15-bit ADC
Alternative Models: What chips are recommended as replacements for MAX31865ATP
Manufacturer Part Number Package Notes
TI ADS1220IPWR TSSOP-16 24-bit, RTD + thermocouple
ADI AD7124-4BCPZ LFCSP-24 24-bit, 4-ch, low power
Microchip MCP3550-50-E/SN SOIC-8 22-bit, 50/60Hz rejection
Maxim MAX31865ATP+ TQFN-20 Same part, different packaging

Recommend Parts

RK73H1ETTP20R0F

20Ohm +/-1% 0.063W thick film resistor, 0402, +/-100 ppm/C, AEC-Q200

Brand: KOA Speer

Package: 0402 (1005 Metric) 1.0 x 0.5 x 0.35 mm

IN STOCK: 33180pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS77001DBVR

50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

IN STOCK: 5000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS61021ADSGR

3A synchronous boost converter, 1.8-5.5V, VSSOP-8

Brand: TI

Package: VSSOP-8 (3.0 x 3.0 mm, DSG package)

IN STOCK: 12398pcs

Cargo cycle: 3-7 Days

The minimum order is 1

S1MB-13-F

1A 1000V GPP rectifier, 1.1V VF, 3μs trr, SMB/DO-214AA, -65~150°C

Brand: Diodes Inc

Package: SMB / DO-214AA (4.57 x 3.94 x 2.50mm)

IN STOCK: 3679pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADUM5000ARWZ-RL

500mW isolated DC-DC converter, 3.3/5V, SOIC-16W

Brand: ADI

Package: SOIC-16W (10.3 x 7.5 mm, RW package)

IN STOCK: 6373pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADS830E/2K5

8-bit 60MSPS high-speed ADC, TSSOP-24

Brand: TI

Package: TSSOP-24 (7.8 x 4.4 mm)

IN STOCK: 9357pcs

Cargo cycle: 3-7 Days

The minimum order is 1