Opens in a new tab

INA117KU/2K5

Unity-gain diff amp, +/-200V CM, 86dB CMRR, SOIC-8, high-side current sensing, precision

3546

Effective Inventory

Image for reference only

Manufacturer Part:

INA117KU/2K5

Package:

SOIC-8 (4.90 x 3.90 x 1.37 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The INA117KU/2K5 from Texas Instruments is a precision unity-gain difference amplifier in a SOIC-8 package. With +/-200V common-mode input range and high CMRR, it accurately measures small differential voltages in high-voltage environments.

Key Specifications

Common-Mode Range +/-200 V (continuous)
Gain 1 V/V (unity)
CMRR 86 dB (minimum)
Bandwidth 200 kHz
Input Offset Voltage +/-1 mV (maximum)
Supply Voltage +/-2.25 V to +/-18 V
Operating Temperature -40C to +85C

Features

  • +/-200V common-mode input range for high-side current sensing at any voltage
  • 86dB minimum CMRR rejects common-mode noise and offset
  • Unity-gain difference amplifier requires no external resistors
  • +/-1mV maximum input offset for accurate small-signal measurement
  • 200kHz bandwidth for monitoring dynamic current waveforms
  • Internal precision resistor network laser-trimmed for gain accuracy

Applications

  • High-side current sensing in power supplies and motor drives
  • Battery cell voltage monitoring in stacked configurations
  • Power supply output voltage and current measurement
  • Industrial process control differential measurement
Product Introduction: INA117KU/2K5 Product Introduction

The INA117KU/2K5 from Texas Instruments is a precision unity-gain difference amplifier in a SOIC-8 package, specifically designed for measuring small differential voltages in the presence of extremely high common-mode voltages. The +/-200V continuous common-mode input range enables direct measurement of shunt resistor voltages in high-voltage circuits such as 48V power supplies, motor drives, and stacked battery packs, without the need for voltage dividers or isolation amplifiers. The 86dB minimum common-mode rejection ratio ensures that common-mode voltage changes do not corrupt the differential measurement. The internal laser-trimmed thin-film resistor network provides a precise unity gain (1V/V) with no external components required. The +/-1mV maximum input offset voltage over temperature ensures accurate measurement of small shunt voltages. The 200kHz bandwidth supports monitoring of dynamic current waveforms in switching power supplies and motor drives. The dual supply operation (+/-2.25V to +/-18V) is compatible with standard op-amp supply rails, and the output swings to within 1.5V of the supply rails.

Working Principle: INA117KU/2K5 Working Principle

The INA117KU/2K5 uses an internal precision resistor network to implement a difference amplifier. (1) Resistor Network: Four precision thin-film resistors form two voltage dividers that attenuate both the non-inverting and inverting inputs. The resistor ratios are laser-trimmed to exact values so that common-mode voltages are attenuated equally at both inputs, while the differential voltage is preserved with unity gain. (2) Differential Amplification: The op-amp amplifies only the difference between the two attenuated input voltages. The output voltage equals VOUT = (VIN+ – VIN-), the same as the differential input voltage. (3) Common-Mode Rejection: The high CMRR (86dB minimum) is achieved by precise matching of the resistor ratios. Any mismatch would cause a portion of the common-mode voltage to appear as a differential signal at the op-amp input. Laser trimming ensures the ratios match within 0.005%. (4) High-Voltage Operation: The input resistors (approximately 380kOhm each) limit the input current to safe levels even at +/-200V common-mode, while the resulting voltage drops are compensated by the matched network.

Pin Description: INA117KU/2K5 Pin Definition and Functions
Pin Name Type Function
1 VIN- Input Inverting input (high-voltage)
2 VIN+ Input Non-inverting input (high-voltage)
3 V+ Power Positive supply
4 V- Power Negative supply
5 NC – No connect
6 OUTPUT Output Amplified output
7,8 NC – No connect (internal resistor connections)
Application Scenarios: In which products and applications is INA117KU/2K5 used
  • High-side current sensing in power supplies and motor drives at +/-200V
  • Battery cell voltage monitoring in stacked configurations with 86dB CMRR
  • Power supply output voltage and current measurement with unity gain
  • Industrial process control differential measurement at +/-1mV offset
Alternative Models: What chips are recommended as replacements for INA117KU/2K5
Manufacturer Part Number Package Notes
TI INA148UA SOIC-8 +/-200V, similar function
ADI AD629ARZ SOIC-8 +/-270V CM, higher range
TI INA149AIDR SOIC-8 +/-275V CM, upgraded
TI INA132UA SOIC-8 +/-40V CM, lower range

Recommend Parts

TMP275AIDR

0.5C I2C temp sensor, 12-bit, 2.7-5.5V, alert output, 8-SOIC

Brand: TI

Package: 8-SOIC (4.90 x 3.91 x 1.50 mm)

IN STOCK: 3681pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IL485E

NVE IL485E IsoLoop isolated RS-485 transceiver, 2.5kVrms isolation, 35Mbps, 16-SOIC WB

Brand: nve

Package: SOIC-16 WB

IN STOCK: 5280pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFS4227TRLPBF

IRFS4227TRLPBF – 200V N-Channel HEXFET PDP Switch Power MOSFET, 26 mΩ RDS(on), D2PAK (TO-263)

Brand: infineon

Package: D2PAK (TO-263)

IN STOCK: 4334pcs

Cargo cycle: 3-7 Days

The minimum order is 1

CD4070BM96

Quad 2-input XOR gate, 3-18V CMOS, 65ns at 10V, SOIC-14

Brand: TI

Package: SOIC-14 (8.75 x 3.9 x 1.5mm)

IN STOCK: 4245pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AB1526

Bluetooth 5.0 Dual Mode Audio SoC, TWS, AAC, Dual-mic ENC, Integrated Charger, BGA

Brand: airoha

Package: BGA

IN STOCK: 25000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

LP2980IM5-5.0

50mA micropower ultra-low-dropout regulator, 5V, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.1 mm)

IN STOCK: 2557pcs

Cargo cycle: 3-7 Days

The minimum order is 1