Opens in a new tab

TPS563219DDFR

3A 5.5V buck, D-CAP3, SOT-23-8, 600kHz, 0.6V ref, Eco-mode, power good, POL

5009

Effective Inventory

Image for reference only

Manufacturer Part:

TPS563219DDFR

Package:

SOT-23-8 (2.90 x 2.80 x 1.00 mm, 0.65mm pitch)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The TPS563219DDFR from Texas Instruments is a 3A, 5.5V step-down converter in an SOT-23-8 package. With D-CAP3 control mode, it provides fast transient response without external compensation, ideal for space-constrained point-of-load applications.

Key Specifications

Input Voltage 2.7 V to 5.5 V
Output Current 3 A
Switching Frequency 600 kHz (fixed)
Reference Voltage 0.6 V (+/-1%)
Efficiency Up to 95%
Operating Temperature -40C to +125C

Features

  • 2.7V-5.5V input with 3A output in tiny SOT-23-8 package
  • D-CAP3 control mode for fast transient response without compensation
  • 600kHz fixed switching frequency for compact inductor selection
  • 0.6V +/-1% accurate feedback reference for precise output regulation
  • Auto-skip Eco-mode for high light-load efficiency
  • Power good output and programmable soft start

Applications

  • Point-of-load conversion from 3.3V or 5V rails
  • DDR memory VTT termination power supply
  • Space-constrained POL in networking and computing
  • Battery-powered system power regulation
Product Introduction: TPS563219DDFR Product Introduction

The TPS563219DDFR from Texas Instruments is a 3A, 2.7V-5.5V input step-down DC-DC converter in an ultra-compact SOT-23-8 package. The device uses TIs D-CAP3 control mode, a proprietary emulated current-mode control that provides fast transient response without external compensation components. This simplifies the design to just five external components: input capacitor, output capacitor, inductor, and two feedback resistors. The 600kHz fixed switching frequency balances efficiency and component size, enabling the use of small 1-2.2uH inductors and ceramic capacitors. The 0.6V feedback reference with +/-1% accuracy supports output voltages down to 0.6V, making the device suitable for low-voltage core and I/O rails in modern processors and FPGAs. Auto-skip Eco-mode reduces the effective switching frequency at light loads, maintaining high efficiency across the entire load range. The power good (PG) output provides real-time output voltage status for system sequencing and monitoring. The SOT-23-8 package (2.9mm x 2.8mm) enables the smallest possible solution footprint.

Working Principle: TPS563219DDFR Working Principle

The TPS563219DDFR uses D-CAP3 (emulated current-mode) control. (1) D-CAP3 Control: This proprietary control mode emulates the inductor current information from the output voltage ripple and internal ramp signal. Unlike traditional current-mode control, no current sense resistor or sense FET is needed. The emulated current information provides the advantages of current-mode control (cycle-by-cycle current limiting, improved line regulation) without the external compensation requirement. (2) Adaptive On-Time: The on-time is calculated adaptively based on the input voltage, output voltage, and switching frequency to maintain approximately constant frequency. This pseudo-fixed frequency operation simplifies EMI filter design. (3) Eco-Mode: At light loads, the device enters discontinuous conduction mode (DCM) where switching pulses are skipped to maintain regulation, improving light-load efficiency. (4) Power Good: The PG output is an open-drain transistor that pulls low when the output voltage falls below 85% or rises above 115% of the target.

Pin Description: TPS563219DDFR Pin Definition and Functions
Pin Name Type Function
1 GND Ground Ground (exposed pad)
2 VIN Power Input supply (2.7-5.5V)
3 SW Output Switch node (inductor)
4 PG Output Power good (open-drain)
5 FB Input Feedback voltage (0.6V ref)
6 SS I/O Soft-start (external cap)
7 EN Input Enable (active high)
8 BOOT Power Bootstrap capacitor
Application Scenarios: In which products and applications is TPS563219DDFR used
  • Point-of-load conversion from 3.3V or 5V rails to 0.6-3.3V at 3A
  • DDR memory VTT termination power supply with 0.6V reference
  • Space-constrained POL in networking and computing with SOT-23-8 footprint
  • Battery-powered system power regulation with Eco-mode efficiency
Alternative Models: What chips are recommended as replacements for TPS563219DDFR
Manufacturer Part Number Package Notes
TI TPS562219DDFR SOT-23-8 2A version, same family
TI TPS564201DDFR SOT-23-8 4A, similar
Monolithic Power MP2143GD-Z QFN-8 3A, 6V, 1.5MHz
Richtek RT5760AHPGJ5F SOT-23-8 3A, 5.5V, 1.5MHz

Recommend Parts

RK73H1ETTP20R0F

20Ohm +/-1% 0.063W thick film resistor, 0402, +/-100 ppm/C, AEC-Q200

Brand: KOA Speer

Package: 0402 (1005 Metric) 1.0 x 0.5 x 0.35 mm

IN STOCK: 33180pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS77001DBVR

50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

IN STOCK: 5000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS61021ADSGR

3A synchronous boost converter, 1.8-5.5V, VSSOP-8

Brand: TI

Package: VSSOP-8 (3.0 x 3.0 mm, DSG package)

IN STOCK: 12398pcs

Cargo cycle: 3-7 Days

The minimum order is 1

S1MB-13-F

1A 1000V GPP rectifier, 1.1V VF, 3μs trr, SMB/DO-214AA, -65~150°C

Brand: Diodes Inc

Package: SMB / DO-214AA (4.57 x 3.94 x 2.50mm)

IN STOCK: 3679pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADUM5000ARWZ-RL

500mW isolated DC-DC converter, 3.3/5V, SOIC-16W

Brand: ADI

Package: SOIC-16W (10.3 x 7.5 mm, RW package)

IN STOCK: 6373pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADS830E/2K5

8-bit 60MSPS high-speed ADC, TSSOP-24

Brand: TI

Package: TSSOP-24 (7.8 x 4.4 mm)

IN STOCK: 9357pcs

Cargo cycle: 3-7 Days

The minimum order is 1