Opens in a new tab

BQ2057TTS

Li-Ion linear charger, 1S/2S, 4.1/4.2V, SOT-23-5, CC/CV, NTC, precharge, auto restart

2712

Effective Inventory

Image for reference only

Manufacturer Part:

BQ2057TTS

Package:

SOT-23-5 (2.90 x 1.60 x 1.10 mm, 0.95mm pitch)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The BQ2057TTS from Texas Instruments is a single or two-cell Li-Ion/Li-Polymer linear battery charger in a SOT-23-5 package. With constant-current/constant-voltage charging and temperature monitoring, it provides a compact charging solution for portable devices.

Key Specifications

Battery Chemistry Li-Ion / Li-Polymer (1S or 2S)
Charge Voltage 4.1V or 4.2V per cell (selectable)
Charge Current Set by external sense resistor
Input Voltage 4.5V to 18V
Charge Termination Minimum current detection
Temperature Sense NTC thermistor input (TS pin)
Operating Temperature -20C to +70C

Features

  • Linear charger for 1S or 2S Li-Ion/Li-Polymer batteries in SOT-23-5
  • 4.1V or 4.2V per cell voltage selection via CEL pin
  • CC/CV charging with minimum current termination
  • NTC thermistor temperature monitoring for safe charging
  • Precharge conditioning for deeply depleted batteries
  • Auto restart when battery voltage falls below threshold

Applications

  • Portable device Li-Ion battery charging in SOT-23-5
  • Bluetooth headset and wearable battery chargers
  • Handheld instrument Li-Ion charging with NTC safety
  • Backup battery charging in industrial systems
Product Introduction: BQ2057TTS Product Introduction

The BQ2057TTS from Texas Instruments is a compact linear battery charger for single or two-cell Li-Ion and Li-Polymer batteries in a SOT-23-5 package. The device implements a complete CC/CV charging algorithm with preconditioning for deeply depleted cells, constant-current fast charge, constant-voltage top-off, and minimum current termination. The charge voltage is selectable between 4.1V and 4.2V per cell via the CEL pin, supporting both coke and graphite anode Li-Ion chemistries. The charge current is set by an external sense resistor between the VCC and SNS pins, allowing flexible current programming from a few mA to several hundred mA depending on the thermal constraints of the application. The TS pin accepts an NTC thermistor input to suspend charging when the battery temperature is outside the safe charging range (0C to 45C typical), preventing damage from charging at extreme temperatures. Precharge conditioning applies a reduced current (typically 10% of fast charge current) when the battery voltage is below the preconditioning threshold (2.5V per cell typical), safely recovering deeply discharged cells. After full charge termination, the device automatically restarts charging when the battery voltage falls below the recharge threshold, maintaining the battery at full capacity.

Working Principle: BQ2057TTS Working Principle

The BQ2057TTS uses a linear regulator topology for battery charging. (1) Linear Regulator: The internal P-channel MOSFET pass element regulates the charge current and voltage by controlling the voltage drop between the input and the battery. The charge current is sensed through an external resistor between VCC and SNS. The voltage across this resistor is compared to an internal reference to regulate the charge current. (2) CC Phase: When the battery voltage is below the regulation threshold, the charger operates in constant-current mode, regulating the charge current at the programmed value. (3) CV Phase: When the battery voltage reaches the regulation threshold (4.1V or 4.2V per cell), the charger transitions to constant-voltage mode, regulating the battery voltage while the charge current naturally tapers as the battery reaches full charge. (4) Termination: When the charge current drops below the minimum current threshold (typically 10% of programmed current), charging is terminated. (5) Temperature Monitor: The TS pin measures the NTC thermistor resistance. If the resistance indicates a temperature outside the 0C-45C window, charging is suspended until the temperature returns to the safe range.

Pin Description: BQ2057TTS Pin Definition and Functions
Pin Name Type Function
1 VCC Power Input supply (4.5-18V)
2 TS Input Temperature sense (NTC thermistor)
3 CEL Input Cell voltage select (4.1V or 4.2V)
4 COMP I/O Loop compensation capacitor
5 SNS Input Current sense input (external resistor)
Application Scenarios: In which products and applications is BQ2057TTS used
  • Portable device Li-Ion battery charging in SOT-23-5 compact package
  • Bluetooth headset and wearable battery chargers with NTC safety monitoring
  • Handheld instrument Li-Ion charging with precharge conditioning
  • Backup battery charging in industrial systems with auto restart
Alternative Models: What chips are recommended as replacements for BQ2057TTS
Manufacturer Part Number Package Notes
TI BQ24040DSQR SON-10 1A, similar function, newer
MCP MCP73831T-2ACI/OT SOT-23-5 500mA, popular charger
TI BQ2057CSN SOIC-8 Same function, larger package
ST L6924D VFQFPN-16 Linear charger, more features

Recommend Parts

BC857BS

Dual PNP transistor, -45V, -100mA, SOT363, Nexperia

Brand: NXP

Package: SOT363 (SC-88, 2.1 x 1.25 x 0.95 mm)

IN STOCK: 8813pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADUM1200ARZ-RL7

Dual-channel digital isolator based on ADI iCoupler technology, 2/0 direction, SOIC-8 narrow body, 1Mbps (A grade), 2.7-5.5V dual supply, 2500Vrms isolation, >25kV/us CMTI, -40C to +105C.

Package: SOIC-8 Narrow (5.06 x 3.99 x 1.75mm)

IN STOCK: 12476pcs

Cargo cycle: 3-7 Days

The minimum order is 1

PIC32MX795F512L-80I/PT

MIPS32 MCU, 80MHz, 512KB Flash, Ethernet, dual CAN, USB OTG, 100-TQFP

Brand: MICROCHIP

Package: 100-TQFP (14.0 x 14.0 x 1.0 mm)

IN STOCK: 5670pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IS61WV25616BLL-10TLI

4Mbit async SRAM, 256Kx16, 10ns, 3.3V, 44-TSOP-II Industrial

Brand: Issi

Package: 44-TSOP II

IN STOCK: 7802pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AT45DB081E-SHN-T

8Mbit DataFlash, dual-SPI 85MHz, 2x264B SRAM buffers, USON-8 (4x3mm), page-based ECC

Brand: Renesas

Package: USON-8 (4 x 3 x 0.6mm, 0.8mm pitch)

IN STOCK: 4500pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TIP35C

NPN power transistor, 100V VCEO, 25A Ic, 125W, TO-247, low saturation voltage, STMicroelectronics

Brand: ST

Package: TO-247 (through-hole, 3-pin)

IN STOCK: 11500pcs

Cargo cycle: 3-7 Days

The minimum order is 1