Opens in a new tab

TPD4E1B06DCKR

4-ch ESD diode, 5.5V, 0.5pF, SOT-363, IEC 8kV contact, unidirectional, high-speed I/O

9126

Effective Inventory

Image for reference only

Manufacturer Part:

TPD4E1B06DCKR

Package:

SOT-363 / SC-88 (2.00 x 1.25 x 0.90 mm, 0.65mm pitch)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The TPD4E1B06DCKR from Texas Instruments is a 4-channel unidirectional ESD protection diode array in a SOT-363 (SC-88) package. With 5.5V working voltage and 0.5pF capacitance per channel, it provides ultra-low-capacitance ESD protection for high-speed digital interfaces.

Key Specifications

Channels 4
VRWM 5.5 V
VCL (IEC 61000-4-2) 9.5 V (typical at 8kV contact)
Capacitance 0.5 pF per channel (typical)
Leakage Current 0.05 uA (typical at VRWM)
IEC 61000-4-2 Rating +/-8 kV contact, +/-15 kV air
Operating Temperature -55C to +150C

Features

  • 4-channel ESD protection in ultra-compact SOT-363 (SC-88) package
  • 0.5pF per channel ultra-low capacitance for high-speed signal integrity
  • 5.5V working voltage suitable for 3.3V and 5V digital interfaces
  • +/-8kV IEC 61000-4-2 contact discharge ESD rating
  • 9.5V low clamping voltage protects downstream ICs from ESD damage
  • Unidirectional configuration optimized for unipolar digital signals

Applications

  • USB, HDMI, and other high-speed interface ESD protection
  • Processor and FPGA I/O pin ESD clamping
  • Touchscreen controller and display interface protection
  • SD card and eMMC interface ESD suppression
Product Introduction: TPD4E1B06DCKR Product Introduction

The TPD4E1B06DCKR from Texas Instruments is a 4-channel unidirectional ESD protection diode array in an ultra-compact SOT-363 (SC-88) package. The device provides four independent ESD protection channels, each with 0.5pF typical capacitance, making it ideal for protecting high-speed digital interfaces where signal integrity must be preserved. The 5.5V working voltage (VRWM) covers 3.3V and 5V digital signal levels with adequate margin. The 9.5V typical clamping voltage at 8kV IEC 61000-4-2 contact discharge ensures that the voltage seen by the protected IC remains well below its absolute maximum rating during ESD events. The unidirectional configuration is optimized for digital signals that swing between 0V and VCC, providing lower capacitance than bidirectional devices since only one diode is in the signal path. The 0.05uA typical leakage current at VRWM minimizes power consumption in always-on protection configurations. The SOT-363 (SC-88) package measures only 2.0mm x 1.25mm, providing the smallest possible footprint for space-constrained portable electronics. The device meets IEC 61000-4-2 Level 4 (+/-8kV contact, +/-15kV air discharge).

Working Principle: TPD4E1B06DCKR Working Principle

The TPD4E1B06DCKR uses steering diode ESD protection architecture. (1) Normal Operation: During normal operation, each signal line (I/O1 through I/O4) is connected to ground through a reverse-biased steering diode. The diode capacitance of 0.5pF is the only load on the signal line, which is negligible even for multi-Gbps signals. (2) Positive ESD Event: When a positive ESD strike occurs on a signal line, the steering diode for that channel forward biases, clamping the line to approximately one diode drop above VCC (or GND if the VCC pin is connected to GND). The ESD current is diverted through the diode to ground, away from the protected IC. (3) Negative ESD Event: For unidirectional devices, negative ESD events are clamped by the reverse breakdown of the diode, or by the forward-biased path from GND to the signal line through the lower diode. (4) Low Capacitance: The 0.5pF capacitance is achieved by using minimum-area diode junctions. The trade-off is slightly higher clamping voltage compared to larger TVS devices, but the low capacitance is essential for high-speed interfaces like USB 3.0, HDMI, and MIPI where even 1pF of added capacitance can degrade signal quality.

Pin Description: TPD4E1B06DCKR Pin Definition and Functions
Pin Name Type Function
1 I/O 1 I/O ESD protection channel 1
2 GND Ground Ground
3 I/O 2 I/O ESD protection channel 2
4 I/O 3 I/O ESD protection channel 3
5 GND Ground Ground
6 I/O 4 I/O ESD protection channel 4
Application Scenarios: In which products and applications is TPD4E1B06DCKR used
  • USB, HDMI, and high-speed interface ESD protection at 0.5pF per channel
  • Processor and FPGA I/O pin ESD clamping in SOT-363 compact footprint
  • Touchscreen controller and display interface protection at 5.5V VRWM
  • SD card and eMMC interface ESD suppression with 9.5V clamping
Alternative Models: What chips are recommended as replacements for TPD4E1B06DCKR
Manufacturer Part Number Package Notes
TI TPD4E05U06DCKR SOT-363 5V, bidirectional version
Nexperia PRTR5V0U2X,215 SOT-363 2-ch, 5V, USB ESD
onsemi NUP4112UPXV6T1G SOT-363 4-ch, 5V, ESD array
TI TPD6E05U06RVZR SON-10 6-ch, 5V, similar function

Recommend Parts

RK73H1ETTP20R0F

20Ohm +/-1% 0.063W thick film resistor, 0402, +/-100 ppm/C, AEC-Q200

Brand: KOA Speer

Package: 0402 (1005 Metric) 1.0 x 0.5 x 0.35 mm

IN STOCK: 33180pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS77001DBVR

50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

IN STOCK: 5000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS61021ADSGR

3A synchronous boost converter, 1.8-5.5V, VSSOP-8

Brand: TI

Package: VSSOP-8 (3.0 x 3.0 mm, DSG package)

IN STOCK: 12398pcs

Cargo cycle: 3-7 Days

The minimum order is 1

S1MB-13-F

1A 1000V GPP rectifier, 1.1V VF, 3μs trr, SMB/DO-214AA, -65~150°C

Brand: Diodes Inc

Package: SMB / DO-214AA (4.57 x 3.94 x 2.50mm)

IN STOCK: 3679pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADUM5000ARWZ-RL

500mW isolated DC-DC converter, 3.3/5V, SOIC-16W

Brand: ADI

Package: SOIC-16W (10.3 x 7.5 mm, RW package)

IN STOCK: 6373pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADS830E/2K5

8-bit 60MSPS high-speed ADC, TSSOP-24

Brand: TI

Package: TSSOP-24 (7.8 x 4.4 mm)

IN STOCK: 9357pcs

Cargo cycle: 3-7 Days

The minimum order is 1