Opens in a new tab

Home » Integrated Circuits ICs » TAJA225K016RNJ

TAJA225K016RNJ

2.2uF 16V tantalum, 1206, 10%, 6.5Ohm ESR, 107mA ripple, TAJ series, J-lead SMD

8529

Effective Inventory

Image for reference only

Manufacturer Part:

TAJA225K016RNJ

Package:

1206 / EIA 3216-18 (3.20 x 1.60 x 1.60 mm, A case)

Brand:

Product Categories:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The TAJA225K016RNJ from KYOCERA AVX is a 2.2uF, 16V surface-mount tantalum capacitor in a 1206 (3216 metric) case. Part of the TAJ general-purpose series, it features 10% tolerance, 6.5 Ohm ESR, and 107mA ripple current rating for DC/DC and LDO output filtering.

Key Specifications

Capacitance 2.2 uF (+/-10%)
Rated Voltage 16 V DC
ESR 6.5 Ohm typical
Ripple Current 107 mA
Leakage Current 500 nA max
Dissipation Factor 6% max at 120Hz
Operating Temperature -55C to +125C

Features

  • 2.2uF at 16V in compact 1206 (3216) case size for surface-mount assembly
  • 10% capacitance tolerance for precise filtering and timing applications
  • 6.5 Ohm ESR with 107mA ripple current rating for DC/DC output filtering
  • 100% surge current tested for reliable in-rush current handling
  • J-lead construction with polarity band for automated pick-and-place
  • TAJ series general-purpose tantalum with established reliability

Applications

  • DC/DC converter and LDO output filtering at 2.2uF/16V
  • Entertainment and infotainment system power supply decoupling
  • Height-restricted design power supply bypassing in 1.6mm profile
  • General low-power analog and digital circuit bypassing
Product Introduction: TAJA225K016RNJ Product Introduction

The TAJA225K016RNJ from KYOCERA AVX is a 2.2uF, 16V surface-mount solid tantalum capacitor in a 1206 (3216 metric) A-case package, part of the TAJ general-purpose tantalum series. The device features a manganese dioxide (MnO2) cathode system providing self-healing characteristics and reliable operation under DC bias conditions. The 10% capacitance tolerance (K suffix) enables precise filtering and timing applications where tighter tolerance is required than the standard 20% grade. The 6.5 Ohm typical ESR and 107mA ripple current rating make this capacitor suitable for DC/DC converter and LDO output filtering in low-to-moderate current power supplies. The 16V rated voltage provides adequate margin for 5V and 3.3V rail filtering applications. All TAJ series capacitors are 100% surge current tested to ensure reliable performance during power-up inrush events. The J-lead construction with polarity band (anode marking) facilitates automated pick-and-place assembly and correct orientation on the PCB. The compact 3.2mm x 1.6mm x 1.6mm case size is ideal for height-restricted designs where low-profile capacitors are required.

Working Principle: TAJA225K016RNJ Working Principle

The TAJA225K016RNJ is a solid tantalum electrolytic capacitor using manganese dioxide cathode technology. (1) Anode: The tantalum metal is sintered into a porous pellet that forms the anode. The large surface area of the porous structure provides high capacitance in a small volume. (2) Dielectric: A thin layer of tantalum pentoxide (Ta2O5) is grown electrochemically on the anode surface. This oxide layer serves as the dielectric, with a dielectric constant of approximately 27 and breakdown strength of about 1.5V/nm. The 16V rating requires an oxide thickness of approximately 20nm. (3) Cathode: Manganese dioxide (MnO2) is deposited over the oxide layer to serve as the solid electrolyte cathode. The MnO2 provides the electrical connection to the counter electrode and contributes to the self-healing behavior. (4) Self-Healing: If a localized defect in the oxide causes a leakage current, the resulting localized heating converts MnO2 to Mn2O3 (a lower-valence oxide with higher resistance), effectively isolating the defect and restoring low leakage current. (5) Surge Current: During initial power application, the capacitor can experience high inrush current. The 100% surge current testing ensures each unit can withstand the rated surge without failure.

Pin Description: TAJA225K016RNJ Pin Definition and Functions
Terminal Name Polarity Function
1 Anode Positive (+) Positive terminal (marked with polarity band)
2 Cathode Negative (-) Negative terminal (bottom side)
Application Scenarios: In which products and applications is TAJA225K016RNJ used
  • DC/DC converter and LDO output filtering at 2.2uF/16V with 107mA ripple
  • Entertainment and infotainment system power supply decoupling in 1206 case
  • Height-restricted design power supply bypassing in 1.6mm low-profile
  • General low-power analog and digital circuit bypassing with 10% tolerance
Alternative Models: What chips are recommended as replacements for TAJA225K016RNJ
Manufacturer Part Number Package Notes
KYOCERA AVX TAJA225K016RNJ-TP 1206 Tape and reel alternative
KYOCERA AVX TAJA225M016RNJ 1206 20% tolerance version
KEMET T491A225K016AT 1206 KEMET brand equivalent
KYOCERA AVX TAJB225K016RNJ 1210 Larger case, same CV

Recommend Parts

RK73H1ETTP20R0F

20Ohm +/-1% 0.063W thick film resistor, 0402, +/-100 ppm/C, AEC-Q200

Brand: KOA Speer

Package: 0402 (1005 Metric) 1.0 x 0.5 x 0.35 mm

IN STOCK: 33180pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS77001DBVR

50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

IN STOCK: 5000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS61021ADSGR

3A synchronous boost converter, 1.8-5.5V, VSSOP-8

Brand: TI

Package: VSSOP-8 (3.0 x 3.0 mm, DSG package)

IN STOCK: 12398pcs

Cargo cycle: 3-7 Days

The minimum order is 1

S1MB-13-F

1A 1000V GPP rectifier, 1.1V VF, 3μs trr, SMB/DO-214AA, -65~150°C

Brand: Diodes Inc

Package: SMB / DO-214AA (4.57 x 3.94 x 2.50mm)

IN STOCK: 3679pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADUM5000ARWZ-RL

500mW isolated DC-DC converter, 3.3/5V, SOIC-16W

Brand: ADI

Package: SOIC-16W (10.3 x 7.5 mm, RW package)

IN STOCK: 6373pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADS830E/2K5

8-bit 60MSPS high-speed ADC, TSSOP-24

Brand: TI

Package: TSSOP-24 (7.8 x 4.4 mm)

IN STOCK: 9357pcs

Cargo cycle: 3-7 Days

The minimum order is 1