Opens in a new tab

Home » Low Dropout Regulators (LDO) » TPS562219ADDFT

TPS562219ADDFT

4.5-17V 2A sync buck, D-CAP2, 650kHz, TSOT-23-8, no ext comp, 1% Vref, PGOOD

9350

Effective Inventory

Image for reference only

Manufacturer Part:

TPS562219ADDFT

Package:

TSOT-23-8 (1.60 x 2.90 x 1.00 mm)

Brand:

Product Categories:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The TPS562219ADDFT from Texas Instruments is a 4.5V-to-17V input, 2A synchronous step-down converter in a TSOT-23-8 package. Using D-CAP2 mode control at 650kHz, it provides fast transient response with no external compensation, supporting output voltages from 0.76V to 7V.

Key Specifications

Input Voltage 4.5 V to 17 V
Output Current 2 A
Output Voltage 0.76 V to 7 V (adjustable)
Switching Frequency 650 kHz (fixed)
Control Mode D-CAP2
High-Side FET RDS(on) 133 mOhm
Low-Side FET RDS(on) 80 mOhm
Feedback Voltage Accuracy 1% at 25°C
Shutdown Current <10 uA
Features OVP, UVLO, OCP, thermal shutdown, PGOOD
Operating Temperature -40°C to +85°C
Package TSOT-23-8 (1.6 x 2.9 mm)

Features

  • 4.5V to 17V input range with integrated 133mOhm/80mOhm synchronous FETs
  • D-CAP2 mode control provides fast transient response without external compensation
  • 650kHz fixed switching frequency enables compact inductor selection
  • 1% feedback voltage accuracy and adjustable soft-start
  • Power good output, OVP, cycle-by-cycle OCP, and thermal shutdown

Applications

  • Digital TV and set-top box point-of-load power conversion
  • Blu-ray player and network terminal 5V/3.3V buck regulation
  • General-purpose 2A step-down conversion from 12V or 5V input
Product Introduction: TPS562219ADDFT Product Introduction

The TPS562219ADDFT from Texas Instruments is an easy-to-use 2A synchronous step-down converter in a compact TSOT-23-8 package. The device integrates 133mOhm high-side and 80mOhm low-side MOSFETs and operates from a 4.5V to 17V input, producing an adjustable output from 0.76V to 7V. The D-CAP2 mode control provides fast transient response and supports low-ESR output capacitors (ceramic or polymer) without requiring external compensation components. The device always operates in continuous conduction mode, reducing output ripple at light loads compared to skip-mode converters. Protection features include cycle-by-cycle overcurrent limit, non-latching overvoltage protection, undervoltage lockout, and thermal shutdown. An adjustable soft-start controls the output voltage ramp, and a power good output indicates output regulation status. The 1.6mm x 2.9mm TSOT-23-8 package minimizes board space.

Working Principle: TPS562219ADDFT Working Principle

The TPS562219ADDFT uses TI D-CAP2 (Direct Capacitor Attenuation Plus 2) mode control. (1) D-CAP2 Control: This is a constant on-time control architecture with an internal ripple injection circuit. The on-time is determined by the input voltage to maintain approximately constant switching frequency. The error amplifier compares the output voltage feedback with the 0.76V reference, and the comparator triggers a new on-time when the combined feedback signal drops below the reference. (2) Ripple Injection: An internal ripple injection circuit adds a synthesized ripple to the feedback signal, enabling stable operation with very low-ESR ceramic output capacitors. (3) Synchronous Rectification: The low-side MOSFET replaces the external Schottky diode, improving efficiency by conducting the inductor current during the off-time. (4) Continuous Conduction: The device always operates in CCM, even at light loads, which reduces output ripple but increases light-load efficiency compared to skip-mode designs. (5) Protection: Cycle-by-cycle OCP limits the inductor valley current. OVP monitors VOUT and pulls PGOOD low when VOUT exceeds the nominal by 110%. UVLO disables the converter when VIN drops below the threshold.

Pin Description: TPS562219ADDFT Pin Definition and Functions
Pin Name Function
1 GND Ground
2 VIN Input supply (4.5-17V)
3 EN Enable (float=on, low=off)
4 SS Soft start (ext cap to GND)
5 PGOOD Power good output (open drain)
6 VBST Bootstrap (cap to SW)
7 SW Switch node (to inductor)
8 VFB Output voltage feedback (0.76V ref)
Application Scenarios: In which products and applications is TPS562219ADDFT used
  • 12V to 3.3V/1.8V POL conversion at 2A in digital TV and STB
  • 5V to 1.2V core voltage regulation for FPGAs in TSOT-23-8
  • General-purpose 2A buck conversion with D-CAP2 fast transient response
Alternative Models: What chips are recommended as replacements for TPS562219ADDFT
Manufacturer Part Number Package Notes
TI TPS563219ADDFT TSOT-23-8 3A version, pin-compatible
TI TPS562200DDFT TSOT-23-8 2A, lower cost, no PGOOD
Monolithic Power MP8759H-5.0 QFN-8 3A, 5V fixed output

Recommend Parts

TMP275AIDR

0.5C I2C temp sensor, 12-bit, 2.7-5.5V, alert output, 8-SOIC

Brand: TI

Package: 8-SOIC (4.90 x 3.91 x 1.50 mm)

IN STOCK: 3681pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IL485E

NVE IL485E IsoLoop isolated RS-485 transceiver, 2.5kVrms isolation, 35Mbps, 16-SOIC WB

Brand: nve

Package: SOIC-16 WB

IN STOCK: 5280pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFS4227TRLPBF

IRFS4227TRLPBF – 200V N-Channel HEXFET PDP Switch Power MOSFET, 26 mΩ RDS(on), D2PAK (TO-263)

Brand: infineon

Package: D2PAK (TO-263)

IN STOCK: 4334pcs

Cargo cycle: 3-7 Days

The minimum order is 1

CD4070BM96

Quad 2-input XOR gate, 3-18V CMOS, 65ns at 10V, SOIC-14

Brand: TI

Package: SOIC-14 (8.75 x 3.9 x 1.5mm)

IN STOCK: 4245pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AB1526

Bluetooth 5.0 Dual Mode Audio SoC, TWS, AAC, Dual-mic ENC, Integrated Charger, BGA

Brand: airoha

Package: BGA

IN STOCK: 25000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

LP2980IM5-5.0

50mA micropower ultra-low-dropout regulator, 5V, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.1 mm)

IN STOCK: 2557pcs

Cargo cycle: 3-7 Days

The minimum order is 1