Opens in a new tab

Home » Microcontrollers (MCU) » P89LPC936FDH

P89LPC936FDH

80C51 8-bit MCU, 16KB Flash, 512B RAM, 256B EEPROM, 8-bit ADC, 2 CMP, I2C, TSSOP-28

3150

Effective Inventory

Image for reference only

Manufacturer Part:

P89LPC936FDH

Package:

TSSOP-28 (9.70 x 4.40 x 1.00 mm)

Brand:

Product Categories:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The P89LPC936FDH from NXP is a low-power 8-bit 80C51 microcontroller with 16KB Flash, 512B RAM, 256B EEPROM, dual 16-bit timers, 8-bit ADC, and comparator in a 28-pin TSSOP package operating from 2.4V to 3.6V.

Key Specifications

Core 80C51, 8-bit, accelerated
Flash Memory 16 KB
RAM 512 Bytes (256 + 256 auxiliary)
Data EEPROM 256 Bytes
I/O Pins 23
ADC 4-channel, 8-bit
Comparators 2
UART 1 (with fractional baud rate)
I2C 1 (400kHz)
Timers 2x 16-bit, 1x 23-bit RTC
Supply Voltage 2.4 V to 3.6 V
Operating Temperature -40°C to +85°C
Package TSSOP-28

Features

  • Accelerated 80C51 core executing instructions in 2-4 clocks (vs 12 in standard 8051)
  • 16KB Flash with ISP and IAP programming, 256B EEPROM for parameter storage
  • Dual analog comparators with selectable reference and output routing
  • 4-channel 8-bit ADC and two comparators for analog signal monitoring
  • Low-power operation: 1mA/MHz active, 2uA power-down with RTC

Applications

  • Low-power 8051-compatible embedded control with analog sensing
  • Battery-operated instruments requiring ISP firmware updates
  • Industrial control with I2C communication and comparator-based monitoring
Product Introduction: P89LPC936FDH Product Introduction

The P89LPC936FDH from NXP is a low-power, highly integrated 8-bit microcontroller based on an accelerated 80C51 core. The CPU executes instructions in 2 to 4 clock cycles compared to 12 in standard 8051 devices, providing up to 6x performance improvement at the same clock frequency. The device integrates 16KB of Flash program memory with In-System Programming (ISP) and In-Application Programming (IAP) capability, 512 bytes of RAM, and 256 bytes of data EEPROM for non-volatile parameter storage. The analog subsystem includes a 4-channel 8-bit ADC and two analog comparators with selectable reference inputs and output routing to PWM or pin outputs. Communication interfaces include a UART with fractional baud rate generator and an I2C interface at up to 400kHz. The device operates from 2.4V to 3.6V with very low power consumption.

Working Principle: P89LPC936FDH Working Principle

The P89LPC936FDH operates as an accelerated 80C51 microcontroller. (1) Accelerated Core: The 80C51 core is enhanced to execute most instructions in 2-4 clock cycles instead of 12, providing 3-6x throughput improvement over standard 8051 at the same clock frequency. The maximum CPU frequency is 12MHz, achieving equivalent performance to a 36-72MHz standard 8051. (2) Flash Programming: The 16KB Flash supports ISP via UART for firmware updates without removing the device from the board, and IAP for self-programming during operation. The 256-byte EEPROM provides additional non-volatile storage with 100,000 write cycle endurance. (3) ADC: The 8-bit successive approximation ADC converts analog inputs in approximately 17 machine cycles. (4) Comparators: Two comparators with selectable reference (internal bandgap or external pin) can trigger interrupts or directly control PWM outputs for fast analog response without CPU intervention.

Pin Description: P89LPC936FDH Pin Definition and Functions
Pin Group Count Function
Power VDD, VSS 2.4-3.6V supply and ground
Port 0 P0.0-P0.7 8 I/O pins (open drain)
Port 1 P1.0-P1.7 8 I/O with ADC/CMP alternate
Port 2 P2.0-P2.7 8 I/O pins
Port 3 P3.0-P3.1 2 I/O pins (RXD/TXD)
Reset RST Active low reset
Application Scenarios: In which products and applications is P89LPC936FDH used
  • Low-power 8051-compatible control with ISP updates and 8-bit ADC
  • Battery-powered instruments with comparator monitoring and I2C
  • Industrial control requiring 8051 code compatibility and analog sensing
Alternative Models: What chips are recommended as replacements for P89LPC936FDH
Manufacturer Part Number Package Notes
NXP P89LPC935FDH TSSOP-28 8KB Flash version
NXP P89LPC938FDH TSSOP-28 8KB, more ADC channels
Silicon Labs C8051F330-GM QFN-20 8051, 10-bit ADC, smaller

Recommend Parts

TMP275AIDR

0.5C I2C temp sensor, 12-bit, 2.7-5.5V, alert output, 8-SOIC

Brand: TI

Package: 8-SOIC (4.90 x 3.91 x 1.50 mm)

IN STOCK: 3681pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IL485E

NVE IL485E IsoLoop isolated RS-485 transceiver, 2.5kVrms isolation, 35Mbps, 16-SOIC WB

Brand: nve

Package: SOIC-16 WB

IN STOCK: 5280pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFS4227TRLPBF

IRFS4227TRLPBF – 200V N-Channel HEXFET PDP Switch Power MOSFET, 26 mΩ RDS(on), D2PAK (TO-263)

Brand: infineon

Package: D2PAK (TO-263)

IN STOCK: 4334pcs

Cargo cycle: 3-7 Days

The minimum order is 1

CD4070BM96

Quad 2-input XOR gate, 3-18V CMOS, 65ns at 10V, SOIC-14

Brand: TI

Package: SOIC-14 (8.75 x 3.9 x 1.5mm)

IN STOCK: 4245pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AB1526

Bluetooth 5.0 Dual Mode Audio SoC, TWS, AAC, Dual-mic ENC, Integrated Charger, BGA

Brand: airoha

Package: BGA

IN STOCK: 25000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

LP2980IM5-5.0

50mA micropower ultra-low-dropout regulator, 5V, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.1 mm)

IN STOCK: 2557pcs

Cargo cycle: 3-7 Days

The minimum order is 1