Opens in a new tab

Home » Microcontrollers (MCU) » Atmega48-20AU

Atmega48-20AU

AVR 8-bit 20MIPS MCU, 4KB Flash, 512B SRAM, 10-bit ADC, 6 PWM, USART/SPI/I2C, TQFP-32

8960

Effective Inventory

Image for reference only

Manufacturer Part:

Atmega48-20AU

Package:

TQFP-32 (7.0 x 7.0 x 1.20 mm)

Brand:

Product Categories:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The ATmega48-20AU from Microchip (formerly Atmel) is a high-performance 8-bit AVR RISC microcontroller with 4KB Flash, 512B SRAM, 256B EEPROM, and 8-channel 10-bit ADC in a TQFP-32 package operating at up to 20MHz.

Key Specifications

Core AVR 8-bit RISC, up to 20 MIPS @ 20MHz
Flash Memory 4 KB
SRAM 512 Bytes
EEPROM 256 Bytes
I/O Pins 23
ADC 8-channel, 10-bit
Interfaces USART, SPI, TWI (I2C)
Timers 2x 8-bit, 1x 16-bit
PWM 6 channels
Supply Voltage 1.8 V to 5.5 V
Operating Temperature -40°C to +85°C
Package TQFP-32 (7×7 mm)

Features

  • 4KB Flash AVR MCU at 20MHz with 20 MIPS throughput in TQFP-32
  • 6-channel PWM and 8-channel 10-bit ADC for mixed-signal control
  • USART, SPI, and TWI (I2C) serial communication interfaces
  • 6 sleep modes with Power-down current below 1uA
  • debugWIRE on-chip debug interface via RESET pin

Applications

  • Cost-sensitive embedded control with mixed-signal requirements
  • Motor control and power conversion with 6-channel PWM
  • Sensor interface and data acquisition with 10-bit ADC
Product Introduction: Atmega48-20AU Product Introduction

The ATmega48-20AU from Microchip is a low-power CMOS 8-bit microcontroller based on the AVR enhanced RISC architecture. By executing powerful instructions in a single clock cycle, the device achieves throughputs approaching 1 MIPS per MHz. The ATmega48 provides 4KB of In-System Programmable Flash, 512 bytes of SRAM, and 256 bytes of EEPROM. The 8-channel 10-bit ADC and 6 PWM channels support mixed-signal control applications. Communication interfaces include a programmable USART, Master/Slave SPI, and Two-wire Serial Interface (I2C-compatible). The debugWIRE interface enables on-chip debugging using only the RESET pin. The -20AU suffix indicates 20MHz maximum speed grade and TQFP-32 package. The device operates from 1.8V to 5.5V with 6 sleep modes for power optimization.

Working Principle: Atmega48-20AU Working Principle

The ATmega48-20AU operates as a modified Harvard architecture 8-bit RISC microcontroller. (1) AVR Core: The CPU fetches 16-bit instructions from Flash and executes most in a single clock cycle. The 32 general-purpose registers are directly connected to the ALU, enabling single-cycle register-to-register ALU operations. (2) Memory: The Flash supports In-System Programming (ISP) via SPI. The 512-byte SRAM provides fast data access with flexible addressing modes. The 256-byte EEPROM stores non-volatile data with 100,000 write cycle endurance. (3) ADC: The 10-bit successive approximation ADC converts analog inputs in 13-260us depending on prescaler setting. Auto-trigger mode allows timer or event-triggered conversions without CPU intervention. (4) PWM: The Timer/Counter modules generate up to 6 PWM outputs, including fast PWM with variable frequency and phase-correct PWM for motor control. (5) debugWIRE: The on-chip debug system uses a single-wire bi-directional interface on the RESET pin, providing breakpoints and register access without dedicated debug pins.

Pin Description: Atmega48-20AU Pin Definition and Functions
Pin Group Pins Function
Power VCC, GND, AVCC Supply and analog supply
Port B PB0-PB7 SPI, T/C, OC, digital I/O
Port C PC0-PC6 ADC, TWI, RESET, digital I/O
Port D PD0-PD7 USART, INT, OC, digital I/O
Reset PC6/RESET Reset or digital I/O (fuse selectable)
Reference AREF ADC reference voltage input
Application Scenarios: In which products and applications is Atmega48-20AU used
  • Cost-sensitive motor control with 6 PWM and 10-bit ADC in TQFP-32
  • Sensor interface and data acquisition with 8-channel 10-bit ADC
  • General-purpose embedded control with USART/SPI/I2C at 20MHz
Alternative Models: What chips are recommended as replacements for Atmega48-20AU
Manufacturer Part Number Package Notes
Microchip ATmega88-20AU TQFP-32 8KB Flash, pin-compatible upgrade
Microchip ATmega168-20AU TQFP-32 16KB Flash, pin-compatible upgrade
Microchip ATmega48P-20AU TQFP-32 picoPower version, lower current

Recommend Parts

IRFS4310ZTRLPBF

IRFS4310ZTRLPBF – 100V N-Channel HEXFET Power MOSFET, 7 mΩ RDS(on), D2PAK (TO-263AB)

Brand: infineon

Package: D2PAK (TO-263AB)

IN STOCK: 11137pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MSASJ105BB5475MFNA01

4.7uF 6.3V X5R MLCC, 0402, Taiyo Yuden

Brand: gigadevice

Package: 0402 (1005 Metric, 1.0 x 0.5 x 0.5 mm)

IN STOCK: 9701pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRF3415PBF

150V N-channel power MOSFET, 43A, 41mΩ RDS(on), TO-220AB package

Brand: infineon

Package: TO-220AB

IN STOCK: 2940pcs

Cargo cycle: 3-7 Days

The minimum order is 1

105017-1001

USB Type-C receptacle connector, 24-pin, SMD

Brand: Amphenol

Package: SMD (8.9 x 7.3 x 3.2 mm, right angle)

IN STOCK: 5335pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRLB3034PBF

IRLB3034PBF – 40V N-Channel StrongIRFET Power MOSFET (Logic Level), 1.7 mΩ (max) @ 10V; 2.0 mΩ @ 4.5V RDS(on), TO-220AB

Brand: infineon

Package: TO-220AB

IN STOCK: 9724pcs

Cargo cycle: 3-7 Days

The minimum order is 1

XC6SLX75-2FGG484I

Spartan-6 LX75 FPGA, 74637 logic cells, 132 DSP, 3096KB BRAM, 408 I/O, FBGA-484 23x23mm, -2 speed, industrial -40~100C, AMD Xilinx

Brand: xilinx

Package: FGG484 (484-ball fine-pitch BGA, 23x23mm body, 1.0mm ball pitch, 22×22 ball array, 6 I/O banks, lead-free)

IN STOCK: 890pcs

Cargo cycle: 3-7 Days

The minimum order is 1