Opens in a new tab

Home » Integrated Circuits ICs » DS1302S+T&R

DS1302S+T&R

RTC with 31B RAM, 3-wire serial, trickle charger, 300nA backup, SOIC-16, 2-5.5V

7830

Effective Inventory

Image for reference only

Manufacturer Part:

DS1302S+T&R

Package:

SOIC-16 Wide (10.50 x 7.60 x 2.35 mm)

Brand:

Product Categories:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The DS1302S+T&R from Maxim Integrated (now Analog Devices) is a trickle-charge timekeeping chip with a real-time clock/calendar and 31 bytes of static RAM. Using a simple 3-wire serial interface, it operates from 2.0V to 5.5V with battery backup in a 16-pin SOIC package.

Key Specifications

Function Real-Time Clock + 31B RAM
Interface 3-wire serial (CE, I/O, SCLK)
Clock Format BCD: seconds, minutes, hours, day, date, month, year
12/24 Hour Selectable
Supply Voltage 2.0 V to 5.5 V
Battery Backup Yes (VCC1 pin, 2.0V min)
Trickle Charger Programmable (1 or 2 diodes, 2k/4k/8k resistor)
Operating Current 300 nA typical (timekeeping, VCC1=2V)
Serial Clock Rate Up to 2 MHz
Operating Temperature -40°C to +85°C
Package SOIC-16 (7.5mm wide)

Features

  • Real-time clock/calendar with BCD format and leap year compensation to 2100
  • 31 bytes of battery-backed static RAM for non-volatile data storage
  • Programmable trickle charger for backup battery (supercap or rechargeable)
  • 300nA timekeeping current for long battery life in backup mode
  • Simple 3-wire serial interface at up to 2MHz with burst mode

Applications

  • Time-stamping in data loggers and industrial controllers
  • Embedded system time-of-day reference with battery backup
  • Utility metering and point-of-sale terminal timekeeping
Product Introduction: DS1302S+T&R Product Introduction

The DS1302S+T&R from Maxim Integrated (now Analog Devices) is a trickle-charge timekeeping chip containing a real-time clock/calendar and 31 bytes of static RAM. It communicates with a microprocessor via a simple 3-wire serial interface (CE, I/O, SCLK). The real-time clock provides seconds, minutes, hours, day, date, month, and year information, with automatic leap year compensation valid up to 2100. The clock operates in either 24-hour or 12-hour format with AM/PM indication. The 31 bytes of RAM can be used for storing configuration data or time-stamp information that survives power loss when backed up by battery. A programmable trickle charge circuit allows direct charging of a backup supercapacitor or rechargeable battery from the primary supply. The DS1302 operates from 2.0V to 5.5V and consumes only 300nA in timekeeping mode, ensuring years of backup life from a small battery or supercapacitor.

Working Principle: DS1302S+T&R Working Principle

The DS1302S+T&R operates as a serial-interfaced real-time clock with battery backup. (1) Timekeeping: An external 32.768kHz crystal provides the timebase. The internal oscillator divides the crystal frequency to generate 1Hz ticks for the seconds counter. The BCD counters cascade through seconds, minutes, hours, day, date, month, and year. (2) 3-Wire Interface: Communication requires three signals: CE (chip enable), I/O (bidirectional data), and SCLK (serial clock). Read and write operations are initiated by an 8-bit command byte (7-bit address + 1-bit R/W), followed by 8 bits of data. Burst mode reads or writes all 31 RAM bytes plus clock registers sequentially. (3) Dual Supply: VCC2 is the primary supply and VCC1 is the backup. When VCC2 > VCC1 + 0.2V, the device is powered from VCC2. When VCC2 falls below VCC1, the device switches to battery backup from VCC1, maintaining timekeeping at 300nA. (4) Trickle Charger: A programmable charge path connects VCC2 to VCC1 through a series combination of 1 or 2 diodes (for voltage drop) and a 2k/4k/8k resistor (for current limiting), allowing controlled charging of the backup battery.

Pin Description: DS1302S+T&R Pin Definition and Functions
Pin Name Function
1 VCC1 Backup supply (battery)
2,3 X1, X2 32.768kHz crystal
4 GND Ground
5 CE Chip enable (active high)
6 I/O Bidirectional data
7 SCLK Serial clock input
8 VCC2 Primary supply (2-5.5V)
Application Scenarios: In which products and applications is DS1302S+T&R used
  • Data logger time-stamping with battery-backed RTC and 31B parameter RAM
  • Embedded system time-of-day with supercap backup and trickle charge
  • Utility meter and POS terminal timekeeping at 300nA backup current
Alternative Models: What chips are recommended as replacements for DS1302S+T&R
Manufacturer Part Number Package Notes
ADI DS1337S+ SOIC-8 I2C interface, 2 alarms, no RAM
Microchip MCP7940N-I/SN SOIC-8 I2C, 64B EEPROM, events
ST M41T62Q6F QFN-16 I2C, smaller package

Recommend Parts

IRFS4310ZTRLPBF

IRFS4310ZTRLPBF – 100V N-Channel HEXFET Power MOSFET, 7 mΩ RDS(on), D2PAK (TO-263AB)

Brand: infineon

Package: D2PAK (TO-263AB)

IN STOCK: 11137pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MSASJ105BB5475MFNA01

4.7uF 6.3V X5R MLCC, 0402, Taiyo Yuden

Brand: gigadevice

Package: 0402 (1005 Metric, 1.0 x 0.5 x 0.5 mm)

IN STOCK: 9701pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRF3415PBF

150V N-channel power MOSFET, 43A, 41mΩ RDS(on), TO-220AB package

Brand: infineon

Package: TO-220AB

IN STOCK: 2940pcs

Cargo cycle: 3-7 Days

The minimum order is 1

105017-1001

USB Type-C receptacle connector, 24-pin, SMD

Brand: Amphenol

Package: SMD (8.9 x 7.3 x 3.2 mm, right angle)

IN STOCK: 5335pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRLB3034PBF

IRLB3034PBF – 40V N-Channel StrongIRFET Power MOSFET (Logic Level), 1.7 mΩ (max) @ 10V; 2.0 mΩ @ 4.5V RDS(on), TO-220AB

Brand: infineon

Package: TO-220AB

IN STOCK: 9724pcs

Cargo cycle: 3-7 Days

The minimum order is 1

XC6SLX75-2FGG484I

Spartan-6 LX75 FPGA, 74637 logic cells, 132 DSP, 3096KB BRAM, 408 I/O, FBGA-484 23x23mm, -2 speed, industrial -40~100C, AMD Xilinx

Brand: xilinx

Package: FGG484 (484-ball fine-pitch BGA, 23x23mm body, 1.0mm ball pitch, 22×22 ball array, 6 I/O banks, lead-free)

IN STOCK: 890pcs

Cargo cycle: 3-7 Days

The minimum order is 1