Opens in a new tab

HCNR200-000E

0.01% nonlinearity analog optocoupler, dual photodiode, 5kVrms, DIP-8

4800

Effective Inventory

Image for reference only

Manufacturer Part:

HCNR200-000E

Package:

DIP-8 (9.70 x 6.60 x 4.10 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The HCNR200-000E from Broadcom is a high-linearity analog optocoupler consisting of an AlGaAs LED and two closely matched photodiodes. With 0.01% nonlinearity, +/-15% transfer gain tolerance, and 5kVrms isolation in an 8-pin DIP package.

Key Specifications

Isolation Voltage 5000 Vrms (UL 1577)
Nonlinearity 0.01% typical
K3 Transfer Gain (IPD2/IPD1) +/-15% (HCNR200)
Gain Temperature Coefficient 65 ppm/°C
Bandwidth DC to >1 MHz (LED), 10 kHz (circuit)
LED Forward Voltage 1.6V typical @ IF=10mA
LED Forward Current 25 mA max (average)
Photodiode Reverse Voltage 30 V max
Input Power Dissipation 60 mW @ TA=85°C
Output Power Dissipation 700 mW max
Operating Temperature -55°C to +100°C
Package DIP-8 (0.400″ spacing)

Features

  • 0.01% nonlinearity analog optocoupler with dual matched photodiodes
  • +/-15% transfer gain (K3) with 65ppm/°C temperature stability
  • 5kVrms isolation (UL 1577) and IEC 60747-5-5 approved
  • DC to >1MHz LED bandwidth, flexible circuit design for unipolar/bipolar modes

Applications

  • 4-20mA loop isolation and SMPS feedback in industrial process control
  • Medical device analog isolation and precision signal coupling
  • Thermocouple and transducer isolation with 0.01% linearity
Product Introduction: HCNR200-000E Product Introduction

The HCNR200-000E from Broadcom (formerly Avago) is a high-linearity analog optocoupler consisting of a high-performance AlGaAs LED that illuminates two closely matched photodiodes. The input photodiode (PD1) monitors and stabilizes the LED light output, virtually eliminating LED nonlinearity and drift. The output photodiode (PD2) produces a photocurrent linearly related to the LED output. The close photodiode matching ensures 0.01% nonlinearity and +/-15% transfer gain (K3 = IPD2/IPD1). The 65 ppm/C gain temperature coefficient provides excellent stability over temperature. The device supports flexible circuit configurations including unipolar/bipolar, AC/DC, and inverting/non-inverting modes. The 5000Vrms isolation rating meets UL 1577 and IEC 60747-5-5 safety standards. The 000E option denotes the standard DIP-8 through-hole package with 0.400-inch row spacing.

Working Principle: HCNR200-000E Working Principle

The HCNR200-000E uses a servo feedback architecture to achieve high linearity analog isolation. (1) Dual Photodiode Servo: The AlGaAs LED illuminates two photodiodes (PD1 and PD2). An input-side op-amp drives the LED current such that PD1’s photocurrent matches the input signal current. Since PD1 monitors the LED output in real time, any LED nonlinearity or drift is automatically compensated by the servo loop. (2) Transfer Gain: The output photocurrent from PD2 is proportional to PD1’s photocurrent by the ratio K3 = IPD2/IPD1. For the HCNR200, K3 = 1.0 +/-15%. The HCNR201 offers tighter K3 tolerance (+/-5%). (3) Isolation: The optical path between the LED and PD2 provides galvanic isolation rated at 5000Vrms. The DIP-8 package ensures adequate creepage and clearance for this isolation rating. (4) Flexibility: External circuit configuration determines the operating mode. For unipolar operation, a single op-amp servo drives the LED. For bipolar operation, two optocouplers or a center-biased circuit can handle signals of both polarities.

Pin Description: HCNR200-000E Pin Definition and Functions
Pin Name Function
1 LED Anode LED positive terminal
2 LED Cathode LED negative terminal
3 PD1 Cathode Input photodiode cathode
4 PD1 Anode Input photodiode anode
5 PD2 Anode Output photodiode anode
6 PD2 Cathode Output photodiode cathode
7,8 NC No connect
Application Scenarios: In which products and applications is HCNR200-000E used
  • 4-20mA loop isolation and SMPS feedback with 0.01% linearity
  • Medical device analog signal isolation with 5kVrms safety rating
  • Precision thermocouple and transducer isolation in industrial process control
Alternative Models: What chips are recommended as replacements for HCNR200-000E
Manufacturer Part Number Package Notes
Broadcom HCNR201-000E DIP-8 K3 +/-5%, tighter gain
TI ISO124P DIP-8 Isolation amplifier, integrated
ADI AD202JN DIP-16 Isolation amp, wider body

Recommend Parts

RK73H1ETTP20R0F

20Ohm +/-1% 0.063W thick film resistor, 0402, +/-100 ppm/C, AEC-Q200

Brand: KOA Speer

Package: 0402 (1005 Metric) 1.0 x 0.5 x 0.35 mm

IN STOCK: 33180pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS77001DBVR

50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

IN STOCK: 5000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS61021ADSGR

3A synchronous boost converter, 1.8-5.5V, VSSOP-8

Brand: TI

Package: VSSOP-8 (3.0 x 3.0 mm, DSG package)

IN STOCK: 12398pcs

Cargo cycle: 3-7 Days

The minimum order is 1

S1MB-13-F

1A 1000V GPP rectifier, 1.1V VF, 3μs trr, SMB/DO-214AA, -65~150°C

Brand: Diodes Inc

Package: SMB / DO-214AA (4.57 x 3.94 x 2.50mm)

IN STOCK: 3679pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADUM5000ARWZ-RL

500mW isolated DC-DC converter, 3.3/5V, SOIC-16W

Brand: ADI

Package: SOIC-16W (10.3 x 7.5 mm, RW package)

IN STOCK: 6373pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADS830E/2K5

8-bit 60MSPS high-speed ADC, TSSOP-24

Brand: TI

Package: TSSOP-24 (7.8 x 4.4 mm)

IN STOCK: 9357pcs

Cargo cycle: 3-7 Days

The minimum order is 1