Opens in a new tab

TW9992AT-NA1-GE

NTSC/PAL video decoder, 10-bit ADC, 4H comb filter, BT.656 output, LQFP-48

4200

Effective Inventory

Image for reference only

Manufacturer Part:

TW9992AT-NA1-GE

Package:

LQFP-48 (7.00 x 7.00 x 1.40 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The TW9992AT-NA1-GE from Renesas (formerly Intersil/Techwell) is a low-power NTSC/PAL video decoder with analog inputs, adaptive 4H comb filter, and 8-bit ITU-R BT.656 output in a 48-pin LQFP package for automotive and security applications.

Key Specifications

Video Standards NTSC (M/J), PAL (B/D/G/H/I/M/N/60)
Analog Inputs 2x composite, 1x S-Video (Y/C)
ADC Resolution 10-bit
Output Format 8-bit ITU-R BT.656 (YCbCr 4:2:2)
Comb Filter Adaptive 4-line
H/V Sync Separate and embedded sync
Supply Voltage 1.8V (core) / 3.3V (IO)
Power 250 mW typical
Interface I2C/SPI control
Operating Temperature -40°C to +85°C
Package LQFP-48 (7x7mm)

Features

  • NTSC/PAL video decoder with adaptive 4H comb filter for reduced cross-color artifacts
  • 10-bit ADC with 2 composite and 1 S-Video analog inputs
  • 8-bit ITU-R BT.656 output with embedded syncs for direct processor interface

Applications

  • Automotive surround-view and backup camera video decoding
  • Security and surveillance camera video acquisition
Product Introduction: TW9992AT-NA1-GE Product Introduction

The TW9992AT-NA1-GE from Renesas is a low-power NTSC/PAL video decoder that digitizes analog composite and S-Video signals into 8-bit ITU-R BT.656 digital video output. The device features a 10-bit ADC for high-quality analog-to-digital conversion and an adaptive 4-line comb filter that separates luminance and chrominance with minimal cross-luma and cross-color artifacts. Two composite video inputs and one S-Video input support multiple camera connections. The decoder automatically detects the video standard (NTSC or PAL) and adjusts the processing accordingly. The 8-bit YCbCr 4:2:2 output with embedded timing (ITU-R BT.656) interfaces directly with video processors and display controllers without external sync signals. An I2C or SPI serial interface provides control of all decoder parameters including brightness, contrast, saturation, and hue. The device operates from a 1.8V core supply and 3.3V I/O supply, consuming approximately 250mW.

Working Principle: TW9992AT-NA1-GE Working Principle

The TW9992AT-NA1-GE operates as a multi-standard video decoder converting analog video to digital format. (1) Analog Front-End: The selected composite or S-Video input is clamped, amplified, and digitized by the 10-bit ADC at 4x FSC (14.318MHz for NTSC, 17.734MHz for PAL). The analog gain and offset are automatically adjusted by the AGC loop. (2) Comb Filter: The adaptive 4-line comb filter separates the luminance (Y) and chrominance (C) signals from the composite input. The 4-line architecture compares adjacent video lines to distinguish genuine chrominance from high-frequency luminance, reducing dot crawl and cross-color artifacts. The filter adapts to motion between lines to avoid vertical smearing. (3) Color Decoder: The chrominance signal is demodulated using the recovered color subcarrier to produce Cb and Cr color difference signals. The subcarrier is regenerated by a digital PLL locked to the color burst. (4) Output Formatter: The Y, Cb, and Cr components are formatted as 8-bit ITU-R BT.656 with embedded SAV (Start of Active Video) and EAV (End of Active Video) timing codes, allowing a single 8-bit data bus to carry both video data and timing.

Pin Description: TW9992AT-NA1-GE Pin Definition and Functions
Pin Group Count Function
Analog Input 4 AIN1, AIN2, S-Video Y/C
Digital Output 8 Y[7:0] data bus (BT.656)
Clock 2 PCLK output, XTAL input
Control 4 I2C/SPI (SDA, SCL, SS, SCK)
Power Multiple 1.8V, 3.3V, GND
Application Scenarios: In which products and applications is TW9992AT-NA1-GE used
  • Automotive surround-view and backup camera NTSC/PAL video decoding
  • Security surveillance camera analog video to digital conversion
Alternative Models: What chips are recommended as replacements for TW9992AT-NA1-GE
Manufacturer Part Number Package Notes
ADI ADV7180BCPZ LQFP-40 Similar video decoder
NXP SAA7113H QFP-44 NTSC/PAL decoder, older
TW TW2867-LA2-GR LQFP-128 4-ch video decoder + ADC

Recommend Parts

RK73H1ETTP20R0F

20Ohm +/-1% 0.063W thick film resistor, 0402, +/-100 ppm/C, AEC-Q200

Brand: KOA Speer

Package: 0402 (1005 Metric) 1.0 x 0.5 x 0.35 mm

IN STOCK: 33180pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS77001DBVR

50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

IN STOCK: 5000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS61021ADSGR

3A synchronous boost converter, 1.8-5.5V, VSSOP-8

Brand: TI

Package: VSSOP-8 (3.0 x 3.0 mm, DSG package)

IN STOCK: 12398pcs

Cargo cycle: 3-7 Days

The minimum order is 1

S1MB-13-F

1A 1000V GPP rectifier, 1.1V VF, 3μs trr, SMB/DO-214AA, -65~150°C

Brand: Diodes Inc

Package: SMB / DO-214AA (4.57 x 3.94 x 2.50mm)

IN STOCK: 3679pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADUM5000ARWZ-RL

500mW isolated DC-DC converter, 3.3/5V, SOIC-16W

Brand: ADI

Package: SOIC-16W (10.3 x 7.5 mm, RW package)

IN STOCK: 6373pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADS830E/2K5

8-bit 60MSPS high-speed ADC, TSSOP-24

Brand: TI

Package: TSSOP-24 (7.8 x 4.4 mm)

IN STOCK: 9357pcs

Cargo cycle: 3-7 Days

The minimum order is 1