Opens in a new tab

TPS544C25RVFT

30A sync buck, 4.5-18V in, PMBus, D-CAP3, stackable 4-phase, VQFN-28

3500

Effective Inventory

Image for reference only

Manufacturer Part:

TPS544C25RVFT

Package:

VQFN-HR-28 (5.00 x 6.00 x 1.00 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The TPS544C25RVFT from Texas Instruments is a 30A synchronous step-down converter with PMBus interface, 4.5-18V input, 0.5-5.5V adjustable output, D-CAP3 control mode, and stackable configuration in a VQFN-HR-28 package.

Key Specifications

Topology Synchronous Buck Converter
Input Voltage 4.5 V to 18 V
Output Voltage 0.5 V to 5.5 V (adjustable)
Output Current 30 A max
Control Mode D-CAP3 (adaptive on-time)
Interface PMBus (I2C-compatible)
Switching Frequency 200 kHz to 1.2 MHz (progm)
Stackable Yes (up to 4 phases, 120A)
Features Power good, tracking, sequencing
Protection OCP, OVP, OTP, UVLO
Operating Temperature -40°C to +125°C
Package VQFN-HR-28 (5x6mm)

Features

  • 30A synchronous buck with PMBus monitoring and D-CAP3 control
  • Stackable up to 4 phases for 120A with automatic current sharing
  • 4.5-18V input, 0.5-5.5V output with 200kHz-1.2MHz switching

Applications

  • High-current POL for ASICs, FPGAs, and server processors
  • Telecom and datacom power supply with PMBus telemetry
Product Introduction: TPS544C25RVFT Product Introduction

The TPS544C25RVFT from Texas Instruments is a 30A synchronous step-down converter with integrated PMBus digital interface for monitoring, control, and configuration. The device operates from a 4.5V to 18V input and provides an adjustable output from 0.5V to 5.5V at up to 30A. The D-CAP3 control mode provides fast transient response without external compensation, using adaptive on-time modulation with emulated current ramp for stable operation with low-ESR output capacitors. The PMBus interface allows reading of input/output voltage, current, temperature, and fault status, as well as configuration of output voltage, switching frequency, and protection thresholds. Up to four TPS544C25 devices can be stacked for 4-phase, 120A output with automatic current sharing. The device supports output voltage tracking and sequencing for powering complex multi-rail systems. The VQFN-HR-28 package features an enhanced thermal pad for efficient heat dissipation.

Working Principle: TPS544C25RVFT Working Principle

The TPS544C25RVFT operates as a D-CAP3 synchronous buck converter with PMBus digital control. (1) D-CAP3 Control: The D-CAP3 (Direct Capacitor Access with emulated ramp) mode uses an emulated inductor current ramp to stabilize the control loop without external compensation components. The adaptive on-time modulation adjusts the on-time based on input/output voltage ratio to maintain approximately constant switching frequency. (2) PMBus Interface: The PMBus (Power Management Bus) is an I2C-based protocol that allows the host system to read telemetry data (VOUT, IOUT, temperature, faults) and write configuration data (VOUT setpoint, frequency, thresholds). All parameters can be stored in non-volatile memory. (3) Stacking: When multiple TPS544C25 devices share a COMP pin, they operate in interleaved multi-phase mode. The master device generates the PWM signals for all phases, and automatic current sharing balances the load current between phases. Phase interleaving reduces input/output ripple and improves thermal distribution. (4) Protection: Overcurrent protection uses cycle-by-cycle current limiting. Over-voltage and under-voltage monitors on VOUT provide fault detection. Over-temperature protection shuts down the converter at 150C junction temperature.

Pin Description: TPS544C25RVFT Pin Definition and Functions
Pin Group Count Function
Power VIN, VOUT, GND, SW Power path
Control EN, PGOOD, TRACK Enable, status, sequencing
PMBus SDA, SCL, ALERT Communication interface
Config COMP, RT, VSET Loop, frequency, voltage
Bootstrap BOOT High-side gate drive
Application Scenarios: In which products and applications is TPS544C25RVFT used
  • 30A POL for ASICs and FPGAs with PMBus telemetry in servers
  • Stacked 4-phase 120A power supply for high-current processors
Alternative Models: What chips are recommended as replacements for TPS544C25RVFT
Manufacturer Part Number Package Notes
TI TPS544B25RVFT VQFN-28 20A version, same family
Infineon IR3898MTR1PBF PQFN-28 30A, similar function
Renesas ISL68201IRAZ-T QFN-32 Digital PWM controller

Recommend Parts

TMP275AIDR

0.5C I2C temp sensor, 12-bit, 2.7-5.5V, alert output, 8-SOIC

Brand: TI

Package: 8-SOIC (4.90 x 3.91 x 1.50 mm)

IN STOCK: 3681pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IL485E

NVE IL485E IsoLoop isolated RS-485 transceiver, 2.5kVrms isolation, 35Mbps, 16-SOIC WB

Brand: nve

Package: SOIC-16 WB

IN STOCK: 5280pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFS4227TRLPBF

IRFS4227TRLPBF – 200V N-Channel HEXFET PDP Switch Power MOSFET, 26 mΩ RDS(on), D2PAK (TO-263)

Brand: infineon

Package: D2PAK (TO-263)

IN STOCK: 4334pcs

Cargo cycle: 3-7 Days

The minimum order is 1

CD4070BM96

Quad 2-input XOR gate, 3-18V CMOS, 65ns at 10V, SOIC-14

Brand: TI

Package: SOIC-14 (8.75 x 3.9 x 1.5mm)

IN STOCK: 4245pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AB1526

Bluetooth 5.0 Dual Mode Audio SoC, TWS, AAC, Dual-mic ENC, Integrated Charger, BGA

Brand: airoha

Package: BGA

IN STOCK: 25000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

LP2980IM5-5.0

50mA micropower ultra-low-dropout regulator, 5V, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.1 mm)

IN STOCK: 2557pcs

Cargo cycle: 3-7 Days

The minimum order is 1