Opens in a new tab

OP295GSZ

Dual precision op-amp, 100uV Vos, 0.1uV/C drift, R-R out, SOIC-14

4100

Effective Inventory

Image for reference only

Manufacturer Part:

OP295GSZ

Package:

SOIC-14 (8.75 x 3.91 x 1.50 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The OP295GSZ from Analog Devices is a dual rail-to-rail precision operational amplifier with 100uV offset, 0.1uV/°C drift, 500nV p-p noise, and 1.6MHz GBW operating from +/-2V to +/-18V in a 14-pin SOIC package.

Key Specifications

Channels 2 (Dual)
Supply Voltage +/-2 V to +/-18 V (4V to 36V)
Offset Voltage 100 uV typical, 340 uV max
Offset Drift 0.1 uV/°C typical
Input Bias Current 5 nA typical
Noise (0.1-10Hz) 500 nV p-p
GBW 1.6 MHz
Slew Rate 0.35 V/us
Supply Current 500 uA per amplifier
Output Swing Rail-to-rail
Operating Temperature -40°C to +85°C
Package SOIC-14

Features

  • Dual precision op-amp with 100uV offset and 0.1uV/°C drift without chopper noise
  • Rail-to-rail output with wide +/-2V to +/-18V supply range

Applications

  • Precision instrumentation and transducer bridge amplifiers
  • Single-supply signal conditioning with high DC accuracy
Product Introduction: OP295GSZ Product Introduction

The OP295GSZ from Analog Devices is a dual rail-to-rail output precision operational amplifier using a BiCMOS process to achieve 100uV typical offset voltage and 0.1uV/°C drift without chopper stabilization. The device operates from +/-2V to +/-18V supply with rail-to-rail output swing and an input common-mode range that extends to the negative rail. The low 500nV p-p noise from 0.1-10Hz makes it suitable for precision DC and low-frequency applications. The 1.6MHz GBW and 500uA per-amplifier quiescent current provide a good balance of speed and power consumption. The device is unity-gain stable and can drive capacitive loads up to 1000pF. The GSZ suffix denotes the 14-pin SOIC (narrow body) package.

Working Principle: OP295GSZ Working Principle

The OP295GSZ is a BiCMOS precision operational amplifier. (1) BiCMOS Process: The device combines bipolar input transistors (for low noise and low offset) with CMOS output transistors (for rail-to-rail output swing). The input stage uses a PNP differential pair for common-mode range to the negative rail, while the output stage uses common-source PMOS and NMOS transistors for rail-to-rail output swing. (2) Precision Trimming: The offset voltage is trimmed using zener-zapping during wafer-level test, achieving 100uV typical without the clock-feedthrough noise associated with chopper-stabilized amplifiers. (3) Rail-to-Rail Output: The CMOS output stage can swing to within a few millivolts of either supply rail at light loads, maximizing dynamic range in single-supply applications. (4) Low Noise: The bipolar input transistors provide lower voltage noise than CMOS-input op-amps, with 500nV p-p noise from 0.1-10Hz and 19nV/sqrtHz at 1kHz.

Pin Description: OP295GSZ Pin Definition and Functions
Pin Name Function
1 OUT A Output A
2 IN- A Inverting input A
3 IN+ A Non-inverting input A
4 V- Negative supply
5 IN+ B Non-inverting input B
6 IN- B Inverting input B
7 OUT B Output B
8-14 NC/V+ No connect / Positive supply
Application Scenarios: In which products and applications is OP295GSZ used
  • Precision transducer and bridge amplifiers with 100uV offset
  • Single-supply signal conditioning with rail-to-rail output
Alternative Models: What chips are recommended as replacements for OP295GSZ
Manufacturer Part Number Package Notes
ADI OP295GPZ DIP-8 Through-hole version
TI OPA2191IDR SOIC-8 36V, +/-5uV offset
ADI ADA4075-2ARZ SOIC-8 Lower noise, 0.25uV offset

Recommend Parts

IRFS4310ZTRLPBF

IRFS4310ZTRLPBF – 100V N-Channel HEXFET Power MOSFET, 7 mΩ RDS(on), D2PAK (TO-263AB)

Brand: infineon

Package: D2PAK (TO-263AB)

IN STOCK: 11137pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MSASJ105BB5475MFNA01

4.7uF 6.3V X5R MLCC, 0402, Taiyo Yuden

Brand: gigadevice

Package: 0402 (1005 Metric, 1.0 x 0.5 x 0.5 mm)

IN STOCK: 9701pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRF3415PBF

150V N-channel power MOSFET, 43A, 41mΩ RDS(on), TO-220AB package

Brand: infineon

Package: TO-220AB

IN STOCK: 2940pcs

Cargo cycle: 3-7 Days

The minimum order is 1

105017-1001

USB Type-C receptacle connector, 24-pin, SMD

Brand: Amphenol

Package: SMD (8.9 x 7.3 x 3.2 mm, right angle)

IN STOCK: 5335pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRLB3034PBF

IRLB3034PBF – 40V N-Channel StrongIRFET Power MOSFET (Logic Level), 1.7 mΩ (max) @ 10V; 2.0 mΩ @ 4.5V RDS(on), TO-220AB

Brand: infineon

Package: TO-220AB

IN STOCK: 9724pcs

Cargo cycle: 3-7 Days

The minimum order is 1

XC6SLX75-2FGG484I

Spartan-6 LX75 FPGA, 74637 logic cells, 132 DSP, 3096KB BRAM, 408 I/O, FBGA-484 23x23mm, -2 speed, industrial -40~100C, AMD Xilinx

Brand: xilinx

Package: FGG484 (484-ball fine-pitch BGA, 23x23mm body, 1.0mm ball pitch, 22×22 ball array, 6 I/O banks, lead-free)

IN STOCK: 890pcs

Cargo cycle: 3-7 Days

The minimum order is 1