Opens in a new tab

LP2951ACD-3.3/NOPB

Fixed 3.3V LDO, 100mA, 380mV dropout, error flag, SOIC-8

6700

Effective Inventory

Image for reference only

Manufacturer Part:

LP2951ACD-3.3/NOPB

Package:

SOIC-8 (4.90 x 3.91 x 1.50 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The LP2951ACD-3.3/NOPB from Texas Instruments is a micropower LDO regulator with fixed 3.3V output, 100mA, 380mV dropout, error flag, and shutdown in an 8-pin SOIC package.

Key Specifications

Output Voltage 3.3 V (fixed)
Output Current 100 mA
Dropout Voltage 380 mV @ 100mA
Quiescent Current 75 uA typical
Input Voltage 3.8 V to 30 V
Output Accuracy +/-1% at 25°C (AC grade)
Error Flag Yes (open-collector)
Shutdown Yes (logic level)
Operating Temperature -40°C to +125°C
Package SOIC-8 (3.9mm wide)

Features

  • Fixed 3.3V LDO in SOIC-8 with error flag and shutdown
  • AC grade +/-1% accuracy, 380mV dropout at 100mA

Applications

  • 3.3V LDO for battery-powered and industrial systems in SOIC-8
Product Introduction: LP2951ACD-3.3/NOPB Product Introduction

The LP2951ACD-3.3/NOPB from Texas Instruments is the SOIC-8 package version of the fixed 3.3V LP2951AC LDO regulator. Compared to the VSSOP-8 version (LP2951ACMX-3.3), this device uses the wider SOIC-8 package which is easier to handle in manual assembly and rework. The device provides a precisely regulated 3.3V output at up to 100mA with only 380mV dropout. The AC grade provides +/-1% output accuracy at 25°C. The error flag output indicates when the output drops below approximately 92% of nominal (3.04V), providing early power-fail warning. The shutdown pin reduces quiescent current to near zero. The /NOPB suffix indicates non-braided tape and reel packaging.

Working Principle: LP2951ACD-3.3/NOPB Working Principle

Identical to the LP2951ACMX-3.3/NOPB. The D suffix denotes the SOIC-8 package, which is wider and easier to solder than the VSSOP-8. All electrical operation is the same. See LP2951ACMX-3.3 entry for working principle.

Pin Description: LP2951ACD-3.3/NOPB Pin Definition and Functions
Pin Name Function
1 VOUT 3.3V regulated output
2 SENSE Feedback sense (connect to VOUT)
3 SHDN Shutdown (high = off)
4 GND Ground
5 ERR Error flag (open-collector)
6 TAP Internal divider tap
7 FB Feedback input (NC for fixed 3.3V)
8 VIN Input supply (3.8-30V)
Application Scenarios: In which products and applications is LP2951ACD-3.3/NOPB used
  • 3.3V LDO regulation in SOIC-8 for battery-powered industrial systems
Alternative Models: What chips are recommended as replacements for LP2951ACD-3.3/NOPB
Manufacturer Part Number Package Notes
TI LP2951ACMX-3.3/NOPB VSSOP-8 Same function, smaller package
TI LP2951ACD-5.0/NOPB SOIC-8 Fixed 5.0V version
TI LP2951ACD/NOPB SOIC-8 Adjustable version

Recommend Parts

TMP275AIDR

0.5C I2C temp sensor, 12-bit, 2.7-5.5V, alert output, 8-SOIC

Brand: TI

Package: 8-SOIC (4.90 x 3.91 x 1.50 mm)

IN STOCK: 3681pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IL485E

NVE IL485E IsoLoop isolated RS-485 transceiver, 2.5kVrms isolation, 35Mbps, 16-SOIC WB

Brand: nve

Package: SOIC-16 WB

IN STOCK: 5280pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFS4227TRLPBF

IRFS4227TRLPBF – 200V N-Channel HEXFET PDP Switch Power MOSFET, 26 mΩ RDS(on), D2PAK (TO-263)

Brand: infineon

Package: D2PAK (TO-263)

IN STOCK: 4334pcs

Cargo cycle: 3-7 Days

The minimum order is 1

CD4070BM96

Quad 2-input XOR gate, 3-18V CMOS, 65ns at 10V, SOIC-14

Brand: TI

Package: SOIC-14 (8.75 x 3.9 x 1.5mm)

IN STOCK: 4245pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AB1526

Bluetooth 5.0 Dual Mode Audio SoC, TWS, AAC, Dual-mic ENC, Integrated Charger, BGA

Brand: airoha

Package: BGA

IN STOCK: 25000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

LP2980IM5-5.0

50mA micropower ultra-low-dropout regulator, 5V, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.1 mm)

IN STOCK: 2557pcs

Cargo cycle: 3-7 Days

The minimum order is 1