Opens in a new tab

MCP23S17T-E/SO

16-bit SPI I/O expander, 10MHz, 1.8-5.5V, 25mA/pin, SOIC-28

9567

Effective Inventory

Image for reference only

Manufacturer Part:

MCP23S17T-E/SO

Package:

SOIC-28 (7.5 x 17.9 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The MCP23S17T-E/SO from Microchip Technology is a 16-bit I/O expander with a high-speed SPI interface (up to 10MHz). Providing 16 bidirectional I/O pins with interrupt outputs and configurable address pins for up to 8 devices on one bus, it expands GPIO capability in SOIC-28 package for embedded systems.

Key Specifications

I/O Channels 16 (two 8-bit ports)
Interface SPI (up to 10MHz)
Supply Voltage 1.8V to 5.5V
I/O Current per Pin 25 mA (sink/source)
Address Pins 3 (up to 8 devices on bus)
Interrupt Outputs 2 (INTA, INTB)
Standby Current 1 μA (max)
Operating Temperature -40°C to +125°C
Package SOIC-28

Features

  • 16-bit remote bidirectional I/O port with configurable polarity inversion
  • High-speed SPI interface supporting up to 10MHz clock speed
  • Three hardware address pins allow up to 8 devices on the same SPI bus
  • Configurable interrupt output pins (active-high, active-low, or open-drain)
  • INTA and INTB configurable for independent or combined operation
  • Interrupt-on-change from configured defaults or pin level changes
  • External reset input and low 1μA standby current

Applications

  • Expanding GPIO on microcontrollers with limited I/O pins
  • Keypad and matrix scanning interfaces
  • LED display and indicator driving systems
  • Industrial control and monitoring panel interfaces
  • Home automation I/O expansion modules
Product Introduction: MCP23S17T-E/SO Product Introduction

The MCP23S17T-E/SO is a 16-bit general-purpose I/O expander from Microchip Technology that uses a high-speed SPI serial interface to communicate with a host microcontroller. It provides 16 bidirectional I/O pins organized as two 8-bit ports (PORTA and PORTB), each with configurable data direction, polarity inversion, pull-up resistors, and interrupt-on-change capability. Three hardware address pins (A0-A2) allow up to 8 MCP23S17 devices to share a single SPI bus, providing up to 128 additional I/O pins. The device supports SPI clock rates up to 10MHz and operates from 1.8V to 5.5V over the -40°C to +125°C temperature range.

Working Principle: MCP23S17T-E/SO Working Principle

The MCP23S17 operates through three functional subsystems. (1) The SPI communication interface receives commands from the host microcontroller via the SCK, MOSI, MISO, and CS pins, decoding register addresses and read/write operations according to the SPI protocol with address byte, register pointer byte, and data byte format. (2) The register array consists of 22 configuration and data registers including IODIRA/B (direction), GPINTENA/B (interrupt-on-change), DEFVALA/B (default value), INTCONA/B (interrupt control), IOCON (configuration), GPIOA/B (port data), and OLATA/B (output latch). (3) The I/O port logic drives the 16 bidirectional pins based on register settings, with each pin independently configurable as input or output. When configured as input, the interrupt logic monitors pin state changes and generates INTA/INTB signals to notify the host, with the interrupt capture register preserving the port state at the time of interrupt.

Pin Description: MCP23S17T-E/SO Pin Definition and Functions
Pin Name Function
1 GPB0 Port B I/O bit 0
2 GPB1 Port B I/O bit 1
3 GPB2 Port B I/O bit 2
4 GPB3 Port B I/O bit 3
5 GPB4 Port B I/O bit 4
6 GPB5 Port B I/O bit 5
7 GPB6 Port B I/O bit 6
8 GPB7 Port B I/O bit 7
9 VDD Power supply (1.8-5.5V)
10 VSS Ground
11 CS SPI chip select (active low)
12 SCK SPI clock input
13 SI SPI data in (MOSI)
14 SO SPI data out (MISO)
15 A0 Address bit 0
16 A1 Address bit 1
17 A2 Address bit 2
18 RESET Hardware reset (active low)
19 INTB Port B interrupt output
20 INTA Port A interrupt output
21-28 GPA0-GPA7 Port A I/O bits 0-7
Application Scenarios: In which products and applications is MCP23S17T-E/SO used
  • Expanding GPIO pins on microcontrollers for multi-switch and sensor interfaces
  • Keypad matrix scanning in access control and security systems
  • LED panel driving with 25mA per pin current sink/source capability
  • Industrial PLC I/O modules with interrupt-driven change detection
  • Home automation relay and sensor expansion boards
Alternative Models: What chips are recommended as replacements for MCP23S17T-E/SO
Model Manufacturer Key Difference
MCP23017T-E/SO Microchip I2C interface version (same I/O)
MCP23S17T-E/SS Microchip SSOP-28 package option
MCP23S17T-E/ML Microchip QFN-28 package option
SX1509 Semtech 16-bit I/O expander, I2C, LED driver
PCA9555 NXP 16-bit I2C I/O expander

Recommend Parts

IRFS4310ZTRLPBF

IRFS4310ZTRLPBF – 100V N-Channel HEXFET Power MOSFET, 7 mΩ RDS(on), D2PAK (TO-263AB)

Brand: infineon

Package: D2PAK (TO-263AB)

IN STOCK: 11137pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MSASJ105BB5475MFNA01

4.7uF 6.3V X5R MLCC, 0402, Taiyo Yuden

Brand: gigadevice

Package: 0402 (1005 Metric, 1.0 x 0.5 x 0.5 mm)

IN STOCK: 9701pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRF3415PBF

150V N-channel power MOSFET, 43A, 41mΩ RDS(on), TO-220AB package

Brand: infineon

Package: TO-220AB

IN STOCK: 2940pcs

Cargo cycle: 3-7 Days

The minimum order is 1

105017-1001

USB Type-C receptacle connector, 24-pin, SMD

Brand: Amphenol

Package: SMD (8.9 x 7.3 x 3.2 mm, right angle)

IN STOCK: 5335pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRLB3034PBF

IRLB3034PBF – 40V N-Channel StrongIRFET Power MOSFET (Logic Level), 1.7 mΩ (max) @ 10V; 2.0 mΩ @ 4.5V RDS(on), TO-220AB

Brand: infineon

Package: TO-220AB

IN STOCK: 9724pcs

Cargo cycle: 3-7 Days

The minimum order is 1

XC6SLX75-2FGG484I

Spartan-6 LX75 FPGA, 74637 logic cells, 132 DSP, 3096KB BRAM, 408 I/O, FBGA-484 23x23mm, -2 speed, industrial -40~100C, AMD Xilinx

Brand: xilinx

Package: FGG484 (484-ball fine-pitch BGA, 23x23mm body, 1.0mm ball pitch, 22×22 ball array, 6 I/O banks, lead-free)

IN STOCK: 890pcs

Cargo cycle: 3-7 Days

The minimum order is 1