Opens in a new tab

TPS63002DRCR

Buck-boost converter, 1.8-5.5Vin, 1.2-5.5Vout adj, 1.2A, 96%, QFN-10

7654

Effective Inventory

Image for reference only

Manufacturer Part:

TPS63002DRCR

Package:

QFN-10 (3 x 3 x 0.9 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The TPS63002DRCR from Texas Instruments is a high-efficiency single-inductor buck-boost converter with 1.8A switches and adjustable output voltage from 1.2V to 5.5V. With 1.8V to 5.5V input range and up to 96% efficiency, it seamlessly transitions between buck and boost modes for battery-powered applications in a 3x3mm QFN-10 package.

Key Specifications

Input Voltage Range 1.8V to 5.5V
Output Voltage Range 1.2V to 5.5V (adjustable)
Maximum Output Current 1.2A (buck), 0.8A (boost)
Efficiency Up to 96%
Switching Frequency 2.4 MHz (fixed)
Quiescent Current 50 μA (typical)
Shutdown Current Less than 1 μA
Package QFN-10 (3 x 3 mm)
Operating Temperature -40°C to +85°C

Features

  • Seamless buck/boost mode transition for battery voltage above and below output
  • Adjustable output voltage using external resistor divider
  • 2.4MHz fixed switching frequency enables small external components
  • Up to 96% efficiency for extended battery life
  • Power-save mode for high light-load efficiency
  • Load disconnect during shutdown

Applications

  • Single-cell Li-Ion battery-powered portable devices
  • Wireless communication module power supplies
  • USB and battery dual-source power systems
  • Handheld instruments and measurement equipment
  • White LED backlight power
Product Introduction: TPS63002DRCR Product Introduction

The TPS63002DRCR from Texas Instruments is the adjustable output voltage version of the TPS6300x family of high-efficiency single-inductor buck-boost converters. With four integrated N-channel MOSFET switches, it provides seamless transition between step-down and step-up operation for battery applications where the input voltage can be above, below, or equal to the output. The output voltage is set by an external resistor divider from 1.2V to 5.5V, offering design flexibility. The device delivers up to 1.2A in buck mode and 0.8A in boost mode at 3.3V output, with peak efficiency of 96%. The 2.4MHz switching frequency minimizes external component size, and power-save mode maintains efficiency at light loads.

Working Principle: TPS63002DRCR Working Principle

The TPS63002 uses a 4-switch single-inductor buck-boost topology with average current-mode control. (1) The voltage error amplifier compares the divided-down FB pin voltage against the internal reference, producing an error signal that controls the average inductor current through a fast inner current loop. Input and output voltage feedforward improves transient response. (2) The 4-switch topology automatically selects between buck mode (VIN > VOUT, using S1/S2), boost mode (VIN < VOUT, using S3/S4), or pass-through, always using only two actively switching MOSFETs to maximize efficiency. (3) The power-save mode reduces switching frequency at light loads by skipping pulses, while forced PWM mode via PS/SYNC pin maintains constant frequency for noise-sensitive applications.

Pin Description: TPS63002DRCR Pin Definition and Functions
Pin Name Function
1 VIN Input supply (1.8-5.5V)
2 EN Enable (active high)
3 PS/SYNC Power-save/sync input
4 VOUT Output voltage
5 L1 Inductor connection 1
6 L2 Inductor connection 2
7 PGND Power ground
8 GND Analog ground
9 FB Feedback input (ext. resistor divider)
10 VINA Analog supply input
Application Scenarios: In which products and applications is TPS63002DRCR used
  • Adjustable output buck-boost for multi-voltage battery-powered systems
  • Portable wireless modules with flexible supply requirements
  • USB/battery dual-source systems with variable output needs
  • Handheld test instruments requiring programmable output voltage
  • White LED driver with adjustable current set via output voltage
Alternative Models: What chips are recommended as replacements for TPS63002DRCR
Model Manufacturer Key Difference
TPS63001DRCR TI 3.3V fixed output version
TPS63000DRCR TI Adjustable, same family
TPS63020DRCR TI Higher current (2A) buck-boost
LTC3532ESS#TRPBF Analog Devices 2A buck-boost, adjustable
MAX77827 Maxim 2.5A buck-boost, small footprint

Recommend Parts

TMP275AIDR

0.5C I2C temp sensor, 12-bit, 2.7-5.5V, alert output, 8-SOIC

Brand: TI

Package: 8-SOIC (4.90 x 3.91 x 1.50 mm)

IN STOCK: 3681pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IL485E

NVE IL485E IsoLoop isolated RS-485 transceiver, 2.5kVrms isolation, 35Mbps, 16-SOIC WB

Brand: nve

Package: SOIC-16 WB

IN STOCK: 5280pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFS4227TRLPBF

IRFS4227TRLPBF – 200V N-Channel HEXFET PDP Switch Power MOSFET, 26 mΩ RDS(on), D2PAK (TO-263)

Brand: infineon

Package: D2PAK (TO-263)

IN STOCK: 4334pcs

Cargo cycle: 3-7 Days

The minimum order is 1

CD4070BM96

Quad 2-input XOR gate, 3-18V CMOS, 65ns at 10V, SOIC-14

Brand: TI

Package: SOIC-14 (8.75 x 3.9 x 1.5mm)

IN STOCK: 4245pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AB1526

Bluetooth 5.0 Dual Mode Audio SoC, TWS, AAC, Dual-mic ENC, Integrated Charger, BGA

Brand: airoha

Package: BGA

IN STOCK: 25000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

LP2980IM5-5.0

50mA micropower ultra-low-dropout regulator, 5V, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.1 mm)

IN STOCK: 2557pcs

Cargo cycle: 3-7 Days

The minimum order is 1