Opens in a new tab

MCP120T-270I/TT

Voltage supervisor, 2.625V trip, open-drain reset, 350ms timeout, SOT-23-3

12456

Effective Inventory

Image for reference only

Manufacturer Part:

MCP120T-270I/TT

Package:

SOT-23-3 (2.9 x 1.3 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The MCP120T-270I/TT from Microchip Technology is a microcontroller supervisory circuit with open-drain reset output and 2.625V trip voltage. Holding the microcontroller in reset until supply voltage stabilizes, it provides precision brown-out protection in a tiny SOT-23-3 package.

Key Specifications

Function Voltage Supervisor
Trip Voltage 2.55V to 2.70V (270)
Reset Output Active low, open-drain
Reset Timeout 350 ms (typical)
Operating Voltage 1V to 5.5V
Operating Current 45 μA (typical)
Accuracy ±75mV over temperature
Package SOT-23-3
Operating Temperature -40°C to +85°C

Features

  • Precision 2.625V nominal trip voltage for 2.7V systems
  • Open-drain active-low reset output
  • 350ms reset timeout holds MCU in reset during stabilization
  • Reset valid down to VCC = 1.0V for reliable power-down behavior
  • Low 45μA typical operating current

Applications

  • 2.7V microcontroller brown-out detection and reset
  • Power supply monitoring in battery-operated systems
  • Embedded system power-on reset generation
  • FPGA and CPLD power sequencing supervision
  • Industrial controller watchdog reset
Product Introduction: MCP120T-270I/TT Product Introduction

The MCP120T-270I/TT from Microchip Technology is a voltage supervisory circuit designed to keep a microcontroller in reset until the system supply voltage reaches and stabilizes at the proper operating level, and to protect against brown-out conditions when the supply drops below safe levels. The -270 trip voltage variant has a nominal threshold of 2.625V (range 2.55V to 2.70V) with ±75mV accuracy over temperature, making it ideal for monitoring 2.7V logic supplies. The open-drain active-low reset output is asserted whenever VDD falls below the trip point and is held for 350ms after VDD rises above threshold, ensuring the microcontroller has sufficient time to stabilize before beginning execution.

Working Principle: MCP120T-270I/TT Working Principle

The MCP120T-270I/TT operates as a precision voltage detector. (1) The internal voltage reference and comparator continuously monitor the VDD supply voltage against the trip-point threshold (2.625V nominal for the -270 variant). When VDD drops below the trip point, the reset output is immediately asserted (driven low via the open-drain output). (2) When VDD rises above the trip point, the internal timeout counter begins, holding the reset output low for 350ms (typical) to allow the power supply and clock oscillator to stabilize before the microcontroller begins executing code. (3) The open-drain output requires an external pull-up resistor to the logic supply and can be wire-ORed with other open-drain reset sources. The reset function remains valid down to VDD = 1.0V, ensuring the microcontroller is held in a known state even during deep power-down transients.

Pin Description: MCP120T-270I/TT Pin Definition and Functions
Pin Name Function
1 VDD Power supply (1V to 5.5V)
2 GND Ground
3 RESET Active-low reset output (open-drain)
Application Scenarios: In which products and applications is MCP120T-270I/TT used
  • 2.7V microcontroller power-on reset and brown-out protection
  • Battery-powered system low-voltage detection and safe shutdown
  • FPGA and CPLD configuration voltage monitoring during power-up
  • Industrial controller supervisory reset for reliable startup
  • Multi-voltage system power sequencing with open-drain wire-OR
Alternative Models: What chips are recommended as replacements for MCP120T-270I/TT
Model Manufacturer Key Difference
MCP130T-270I/TT Microchip With internal 5kΩ pull-up resistor
MCP120T-300I/TT Microchip 3.0V trip voltage variant
MCP120T-315I/TT Microchip 3.15V trip voltage variant
TLV803EA29DBZR TI 2.93V supervisor, SOT-23-3
MAX809TR29 Maxim 2.93V supervisor, SOT-23-3

Recommend Parts

TMP275AIDR

0.5C I2C temp sensor, 12-bit, 2.7-5.5V, alert output, 8-SOIC

Brand: TI

Package: 8-SOIC (4.90 x 3.91 x 1.50 mm)

IN STOCK: 3681pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IL485E

NVE IL485E IsoLoop isolated RS-485 transceiver, 2.5kVrms isolation, 35Mbps, 16-SOIC WB

Brand: nve

Package: SOIC-16 WB

IN STOCK: 5280pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFS4227TRLPBF

IRFS4227TRLPBF – 200V N-Channel HEXFET PDP Switch Power MOSFET, 26 mΩ RDS(on), D2PAK (TO-263)

Brand: infineon

Package: D2PAK (TO-263)

IN STOCK: 4334pcs

Cargo cycle: 3-7 Days

The minimum order is 1

CD4070BM96

Quad 2-input XOR gate, 3-18V CMOS, 65ns at 10V, SOIC-14

Brand: TI

Package: SOIC-14 (8.75 x 3.9 x 1.5mm)

IN STOCK: 4245pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AB1526

Bluetooth 5.0 Dual Mode Audio SoC, TWS, AAC, Dual-mic ENC, Integrated Charger, BGA

Brand: airoha

Package: BGA

IN STOCK: 25000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

LP2980IM5-5.0

50mA micropower ultra-low-dropout regulator, 5V, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.1 mm)

IN STOCK: 2557pcs

Cargo cycle: 3-7 Days

The minimum order is 1