Opens in a new tab

UCC5390ECDWV

17A isolated gate driver, 5kVRMS, UVLO-GND2, SiC/IGBT, SOIC-8 DWV

4523

Effective Inventory

Image for reference only

Manufacturer Part:

UCC5390ECDWV

Package:

SOIC-8 DWV (5.85 x 11.5 mm, 8.5mm creepage)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The UCC5390ECDWV from Texas Instruments is a single-channel isolated gate driver with 17A peak source/sink current and UVLO referenced to GND2. With 5kVRMS isolation, 65ns propagation delay, and 100kV/μs CMTI, it drives IGBTs, SiC MOSFETs, and power MOSFETs in automotive and industrial applications in an 8-pin DWV package with 8.5mm creepage.

Key Specifications

Peak Source Current 17 A
Peak Sink Current 17 A
Isolation Voltage 5000 VRMS (DWV)
Propagation Delay 65 ns (typical)
CMTI 100 kV/μs (minimum)
Input Supply Voltage 3 V to 15 V
Output Supply Voltage 13.2 V to 33 V
UVLO Threshold 12 V (typical)
Rise Time 26 ns
Fall Time 22 ns
Package SOIC-8 DWV (8.5mm creepage)
Operating Temperature -40°C to +125°C

Features

  • 17A peak source and sink current for driving large IGBT and SiC MOSFET gate charges
  • 5kVRMS reinforced isolation with 7000VPK transient rating
  • UVLO referenced to GND2 for true undervoltage detection in bipolar supply configurations
  • SiO2 capacitive isolation technology with >40 year barrier lifetime
  • CMOS input logic with -5V negative voltage handling
  • AEC-Q100 qualified (UCC5390-Q1 variant) for automotive applications

Applications

  • Motor drive inverter IGBT and SiC MOSFET gate driving
  • HEV/EV traction inverter and on-board charger power stages
  • Solar inverter power module gate drive
  • High-voltage DC-DC converter isolated gate drive
  • UPS and industrial power supply isolated driver
Product Introduction: UCC5390ECDWV Product Introduction

The UCC5390ECDWV from Texas Instruments is a high-current single-channel isolated gate driver designed to drive IGBTs, SiC MOSFETs, and power MOSFETs in high-voltage applications. The device provides 17A peak source and sink current with UVLO2 referenced to GND2 (E variant), enabling true undervoltage detection in bipolar supply configurations commonly used with SiC and IGBT devices. The 5kVRMS reinforced isolation barrier uses SiO2 capacitive technology with over 40 years barrier lifetime, while the 8-pin DWV package provides 8.5mm creepage for high-voltage safety compliance. With 65ns typical propagation delay, 100kV/μs minimum CMTI, and 26ns/22ns rise/fall times, the UCC5390ECDWV delivers precise and robust gate drive for demanding power conversion applications.

Working Principle: UCC5390ECDWV Working Principle

The UCC5390ECDWV operates as a capacitive-isolated single-channel gate driver. (1) The input stage receives CMOS logic signals on the IN+ and IN- pins, with the primary side powered by VCC1 (3-15V). The input comparator determines the desired output state, and the digital signal is coupled across the isolation barrier using SiO2 capacitive isolation. (2) The output stage on the secondary side is powered by VCC2 (13.2-33V) and provides 17A peak source current through a parallel P-channel and N-channel MOSFET pull-up structure, and 17A peak sink current through an N-channel MOSFET pull-down. The UVLO2 referenced to GND2 ensures the output is disabled when VCC2 drops below 12V, protecting against insufficient gate drive voltage that could cause high dissipation in the power switch. (3) The capacitive isolation barrier provides galvanic isolation up to 5kVRMS with high common-mode transient immunity (CMTI) of 100kV/μs minimum, preventing false switching during high dv/dt events in motor drive and inverter applications.

Pin Description: UCC5390ECDWV Pin Definition and Functions
Pin Name Function
1 VCC1 Primary side supply (3-15V)
2 IN+ Non-inverting input
3 IN- Inverting input
4 GND1 Primary side ground
5 GND2 Secondary side ground (UVLO ref)
6 OUTH Source output (pull-up)
7 VCC2 Secondary side supply (13.2-33V)
8 OUTL Sink output (pull-down)
Application Scenarios: In which products and applications is UCC5390ECDWV used
  • Motor drive inverter SiC MOSFET and IGBT isolated gate drive with bipolar supply
  • HEV/EV traction inverter power module gate driving with 5kV isolation
  • Solar string inverter SiC MOSFET driver with high CMTI requirement
  • Industrial DC-DC converter isolated IGBT gate drive
  • UPS and server power supply isolated MOSFET driver
Alternative Models: What chips are recommended as replacements for UCC5390ECDWV
Model Manufacturer Key Difference
UCC5390SCDWV TI Split output variant (separate source/sink)
UCC5350MCDWV TI 10A with Miller clamp
UCC5320ECDWV TI 4.3A/4.4A, UVLO-GND2
ADuM4135 Analog Devices Isolated IGBT driver, desat detection
Si823x Silicon Labs Dual isolated gate driver

Recommend Parts

TMP275AIDR

0.5C I2C temp sensor, 12-bit, 2.7-5.5V, alert output, 8-SOIC

Brand: TI

Package: 8-SOIC (4.90 x 3.91 x 1.50 mm)

IN STOCK: 3681pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IL485E

NVE IL485E IsoLoop isolated RS-485 transceiver, 2.5kVrms isolation, 35Mbps, 16-SOIC WB

Brand: nve

Package: SOIC-16 WB

IN STOCK: 5280pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFS4227TRLPBF

IRFS4227TRLPBF – 200V N-Channel HEXFET PDP Switch Power MOSFET, 26 mΩ RDS(on), D2PAK (TO-263)

Brand: infineon

Package: D2PAK (TO-263)

IN STOCK: 4334pcs

Cargo cycle: 3-7 Days

The minimum order is 1

CD4070BM96

Quad 2-input XOR gate, 3-18V CMOS, 65ns at 10V, SOIC-14

Brand: TI

Package: SOIC-14 (8.75 x 3.9 x 1.5mm)

IN STOCK: 4245pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AB1526

Bluetooth 5.0 Dual Mode Audio SoC, TWS, AAC, Dual-mic ENC, Integrated Charger, BGA

Brand: airoha

Package: BGA

IN STOCK: 25000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

LP2980IM5-5.0

50mA micropower ultra-low-dropout regulator, 5V, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.1 mm)

IN STOCK: 2557pcs

Cargo cycle: 3-7 Days

The minimum order is 1