Opens in a new tab

TLV75801PDRVR

500mA adjustable LDO, 1.5-6Vin, 0.55-5.5Vout, 130mV dropout, WSON-6

8765

Effective Inventory

Image for reference only

Manufacturer Part:

TLV75801PDRVR

Package:

WSON-6 / DRV (2 x 2 x 0.8 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The TLV75801PDRVR from Texas Instruments is a 500-mA, high-accuracy, adjustable LDO regulator in a tiny 2x2mm WSON-6 package. With 1.5V to 6.0V input range and adjustable output from 0.55V to 5.5V, it delivers excellent line and load regulation for space-constrained portable applications.

Key Specifications

Output Current 500 mA
Input Voltage Range 1.5 V to 6.0 V
Output Voltage 0.55 V to 5.5 V (adjustable)
Dropout Voltage 130 mV max @ 500mA (3.3Vout)
Accuracy 0.7% typ, 1% max over temperature
Quiescent Current 25 uA (typical)
Shutdown Current 0.1 uA (typical)
PSRR 50 dB @ 1kHz
Noise 53 uVRMS
Package WSON-6 (DRV) (2 x 2 mm)
Operating Temperature -40 to +125 C

Features

  • Adjustable output from 0.55V with 1% accuracy across all conditions
  • Ultra-low 130mV dropout at full 500mA load current
  • 25uA quiescent current extends battery life in portable devices
  • Enable pin for on/off control and power sequencing
  • Built-in soft-start with monotonic VOUT rise
  • Active output discharge when disabled

Applications

  • Portable electronics point-of-load regulation
  • RF transceiver power supply
  • Battery-powered IoT sensor nodes
  • Post-regulation after DC-DC converters
  • Wearable device power management
Product Introduction: TLV75801PDRVR Product Introduction

The TLV75801PDRVR from Texas Instruments is a 500mA low-dropout linear regulator with adjustable output voltage from 0.55V to 5.5V and ultra-low dropout of 130mV at full load. The device operates from a 1.5V to 6.0V input supply, making it suitable for single-cell Li-Ion and Li-Polymer battery applications as well as 3.3V and 5V rail post-regulation. With 0.7% typical output voltage accuracy, 25uA quiescent current, and 50dB PSRR, the TLV75801PDRVR delivers clean, precise power for noise-sensitive RF, analog, and portable applications in a compact 2x2mm WSON-6 package with an enable pin for power sequencing.

Working Principle: TLV75801PDRVR Working Principle

The TLV75801PDRVR operates as a precision low-dropout linear regulator with adjustable output. (1) The output voltage is set by an external resistor divider connected to the FB pin, with the internal error amplifier comparing the divided feedback voltage against a precision 0.55V reference. The error amplifier drives the pass transistor to maintain the output voltage at the desired level. (2) The P-channel MOSFET pass transistor provides low dropout operation (130mV at 500mA) since the gate can be driven close to ground when VIN is only slightly above VOUT. (3) The enable pin (EN) controls the pass transistor gate, disabling the output and reducing quiescent current to below 1uA when pulled low. (4) Protection circuits include foldback current limit, thermal shutdown, undervoltage lockout, and output auto-discharge when disabled.

Pin Description: TLV75801PDRVR Pin Definition and Functions
Pin Name Function
1 OUT Regulated output voltage
2 FB Feedback input (ext. resistor divider)
3 GND Ground
4 EN Enable input (active high)
5 DNC Do not connect
6 IN Input supply (1.5-6.0V)
Pad GND Exposed thermal pad (ground)
Application Scenarios: In which products and applications is TLV75801PDRVR used
  • Portable electronics point-of-load regulation with adjustable output for multi-voltage SoCs
  • RF transceiver and LNA power supply requiring high PSRR and low noise
  • Battery-powered IoT sensor nodes with ultra-low quiescent current
  • DC-DC converter post-regulation for clean analog supply rails
  • Wearable device power management with enable-controlled sequencing
Alternative Models: What chips are recommended as replacements for TLV75801PDRVR
Model Manufacturer Key Difference
TLV75801PDBVR TI SOT-23-5 package version
TLV75501PDRVR TI Lower cost, lower accuracy
TPS7A0518PDBVR TI Fixed 1.8V, ultra-low IQ
AP2112K-ADJ Diodes Inc 600mA adjustable LDO
NCP511SNADJ onsemi 150mA adjustable LDO

Recommend Parts

TMP275AIDR

0.5C I2C temp sensor, 12-bit, 2.7-5.5V, alert output, 8-SOIC

Brand: TI

Package: 8-SOIC (4.90 x 3.91 x 1.50 mm)

IN STOCK: 3681pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IL485E

NVE IL485E IsoLoop isolated RS-485 transceiver, 2.5kVrms isolation, 35Mbps, 16-SOIC WB

Brand: nve

Package: SOIC-16 WB

IN STOCK: 5280pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFS4227TRLPBF

IRFS4227TRLPBF – 200V N-Channel HEXFET PDP Switch Power MOSFET, 26 mΩ RDS(on), D2PAK (TO-263)

Brand: infineon

Package: D2PAK (TO-263)

IN STOCK: 4334pcs

Cargo cycle: 3-7 Days

The minimum order is 1

CD4070BM96

Quad 2-input XOR gate, 3-18V CMOS, 65ns at 10V, SOIC-14

Brand: TI

Package: SOIC-14 (8.75 x 3.9 x 1.5mm)

IN STOCK: 4245pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AB1526

Bluetooth 5.0 Dual Mode Audio SoC, TWS, AAC, Dual-mic ENC, Integrated Charger, BGA

Brand: airoha

Package: BGA

IN STOCK: 25000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

LP2980IM5-5.0

50mA micropower ultra-low-dropout regulator, 5V, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.1 mm)

IN STOCK: 2557pcs

Cargo cycle: 3-7 Days

The minimum order is 1