Opens in a new tab

STM32F100C8T6

Cortex-M3 MCU, 24MHz, 64KB Flash, 10KB RAM, LQFP-48, Value line

8234

Effective Inventory

Image for reference only

Manufacturer Part:

STM32F100C8T6

Package:

LQFP-48 (7 x 7 x 1.4 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The STM32F100C8T6 from STMicroelectronics is a 24MHz, 64KB Flash ARM Cortex-M3 microcontroller from the STM32 Value line. With 10KB SRAM, 12-bit ADC, multiple timers, USART, SPI, I2C, and CEC interfaces, it provides a cost-effective solution for mainstream embedded applications in LQFP-48 package.

Key Specifications

Core ARM Cortex-M3
Max Frequency 24 MHz
Flash Memory 64 KB
SRAM 10 KB
Package LQFP-48
I/O Pins 37
ADC 12-bit, 16 channels, 1 Msps
Timers 7 (General-purpose, Basic, SysTick)
Communication 3x USART, 2x SPI, 2x I2C, 1x CEC
Supply Voltage 2.0 V to 3.6 V
Operating Temperature -40 to +85 C

Features

  • ARM Cortex-M3 core with 24MHz maximum frequency for cost-sensitive applications
  • 64KB Flash and 10KB SRAM for moderate code and data requirements
  • Comprehensive timer suite including motor control and general-purpose timers
  • HDMI-CEC interface for consumer electronics connectivity
  • 12-bit ADC with 16 channels and 1Msps sampling rate
  • Low-power modes: Sleep, Stop, Standby with fast wake-up

Applications

  • Appliance motor control with integrated timer suite
  • Consumer electronics with HDMI-CEC control
  • Industrial sensor interface and simple control loops
  • Building automation HVAC controllers
  • Cost-sensitive general-purpose embedded applications
Product Introduction: STM32F100C8T6 Product Introduction

The STM32F100C8T6 from STMicroelectronics is a member of the STM32 Value line, providing a cost-effective ARM Cortex-M3 microcontroller with 64KB Flash and 10KB SRAM operating at up to 24MHz. The device integrates a rich peripheral set including a 12-bit ADC with 16 channels and 1Msps sampling, seven timers (including advanced motor control and general-purpose timers), three USARTs, two SPIs, two I2C interfaces, and an HDMI-CEC controller for consumer electronics. The STM32 Value line targets mainstream applications where processing performance requirements are moderate but peripheral richness is important. The 48-pin LQFP package provides 37 GPIO pins with 5V-tolerant input capability.

Working Principle: STM32F100C8T6 Working Principle

The STM32F100C8T6 operates as a 32-bit ARM Cortex-M3 microcontroller. (1) The Cortex-M3 processor fetches and executes Thumb-2 instructions from the 64KB Flash memory, with a 3-stage pipeline achieving near 1 DMIPS/MHz throughput. Nested Vectored Interrupt Controller (NVIC) provides deterministic interrupt handling with tail-chaining optimization. (2) The bus matrix connects the CPU to Flash, SRAM, and peripherals through AHB and APB buses. The 10KB SRAM supports zero-wait-state access at 24MHz, and the Flash interface includes a prefetch buffer for improved instruction throughput. (3) The peripheral set is clocked and configured through the RCC (Reset and Clock Control) module, which manages system clock selection (HSI, HSE, PLL), peripheral clock gating, and low-power mode transitions.

Pin Description: STM32F100C8T6 Pin Definition and Functions
Pin Name Function
1 VBAT Battery backup supply for RTC
4 NRST Reset input (active low)
5-6 OSC_IN/OUT External oscillator
7-8 OSC32_IN/OUT 32.768kHz oscillator
9 BOOT0 Boot mode selection
44 VDDA Analog supply voltage
47 VSSA Analog ground
Various PA-PC GPIO and alternate function pins
Application Scenarios: In which products and applications is STM32F100C8T6 used
  • Appliance motor control using advanced timer PWM with complementary outputs
  • Consumer electronics HDMI-CEC control and system management
  • Industrial sensor interface with 12-bit ADC and USART communication
  • Building automation HVAC controller with multiple communication interfaces
  • Cost-sensitive general-purpose embedded control and monitoring
Alternative Models: What chips are recommended as replacements for STM32F100C8T6
Model Manufacturer Key Difference
STM32F100CBT6 ST 128KB Flash, 16KB RAM
STM32F103C8T6 ST 72MHz Performance line
STM32G070CBT6 ST Cortex-M0+, 64MHz, 128KB
LPC1343FBD48 NXP Cortex-M3, 32KB, LQFP-48
ATSAM4N8BA-CU Microchip Cortex-M4, 64KB, LQFP-48

Recommend Parts

TMP275AIDR

0.5C I2C temp sensor, 12-bit, 2.7-5.5V, alert output, 8-SOIC

Brand: TI

Package: 8-SOIC (4.90 x 3.91 x 1.50 mm)

IN STOCK: 3681pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IL485E

NVE IL485E IsoLoop isolated RS-485 transceiver, 2.5kVrms isolation, 35Mbps, 16-SOIC WB

Brand: nve

Package: SOIC-16 WB

IN STOCK: 5280pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFS4227TRLPBF

IRFS4227TRLPBF – 200V N-Channel HEXFET PDP Switch Power MOSFET, 26 mΩ RDS(on), D2PAK (TO-263)

Brand: infineon

Package: D2PAK (TO-263)

IN STOCK: 4334pcs

Cargo cycle: 3-7 Days

The minimum order is 1

CD4070BM96

Quad 2-input XOR gate, 3-18V CMOS, 65ns at 10V, SOIC-14

Brand: TI

Package: SOIC-14 (8.75 x 3.9 x 1.5mm)

IN STOCK: 4245pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AB1526

Bluetooth 5.0 Dual Mode Audio SoC, TWS, AAC, Dual-mic ENC, Integrated Charger, BGA

Brand: airoha

Package: BGA

IN STOCK: 25000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

LP2980IM5-5.0

50mA micropower ultra-low-dropout regulator, 5V, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.1 mm)

IN STOCK: 2557pcs

Cargo cycle: 3-7 Days

The minimum order is 1