Opens in a new tab

ADUM1301BRWZ-RL

Triple digital isolator, 2.5kVrms, 2-fwd/1-rev, 10Mbps, SOIC-16W

7654

Effective Inventory

Image for reference only

Manufacturer Part:

ADUM1301BRWZ-RL

Package:

SOIC-16W (10.3 x 7.5 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The ADUM1301BRWZ-RL from Analog Devices is a triple-channel digital isolator based on iCoupler technology with 2.5kV rms isolation. With two forward and one reverse channel, 10Mbps data rate, and 25kV/us CMTI, it provides robust signal isolation in SOIC-16W package.

Key Specifications

Channels 3 (2 forward, 1 reverse)
Isolation Voltage 2500 V rms
Data Rate Up to 10 Mbps
Propagation Delay 32 ns (typical)
CMTI 25 kV/us (minimum)
Supply Voltage 2.7 V to 5.5 V (each side)
Quiescent Current 0.8 mA @ 5V (per channel)
Package SOIC-16W
Operating Temperature -40 to +105 C

Features

  • Triple-channel isolation with 2 forward and 1 reverse channel
  • 2.5kV rms isolation rated per UL 1577
  • 25kV/us minimum common-mode transient immunity
  • Wide 2.7V to 5.5V supply range on both sides
  • Level translation between different voltage domains
  • Low power consumption with less than 1mA per channel

Applications

  • SPI interface isolation for ADC/DAC data acquisition
  • Isolated UART communication in motor drives
  • Power supply feedback loop isolation
  • Industrial I/O module signal isolation
  • Medical equipment patient isolation barriers
Product Introduction: ADUM1301BRWZ-RL Product Introduction

The ADUM1301BRWZ-RL from Analog Devices is a triple-channel digital isolator built on iCoupler magnetic isolation technology. With two forward channels and one reverse channel, it is ideal for isolating bidirectional communication interfaces such as SPI (SCLK, MOSI/SDI, MISO/SDO). The device provides 2.5kV rms galvanic isolation per UL 1577 with minimum 25kV/us common-mode transient immunity, making it suitable for noisy industrial environments. Both sides operate from 2.7V to 5.5V, enabling level translation between different voltage domains. The RL suffix indicates tape and reel packaging.

Working Principle: ADUM1301BRWZ-RL Working Principle

The ADUM1301BRWZ-RL operates using iCoupler magnetic isolation technology. (1) Each channel consists of a CMOS encoder on the input side that converts the digital input into high-frequency pulses driving on-chip planar transformer windings. The magnetic coupling transfers the signal across the isolation barrier, where a CMOS decoder reconstructs the digital signal. (2) The two forward channels (VIA to VOA, VIB to VOB) carry signals from side 1 to side 2, while the one reverse channel (VIC to VOC) carries a signal from side 2 to side 1, enabling bidirectional communication. (3) The refresh circuit continuously pulses the transformers even when the input is static, ensuring the output state is maintained correctly.

Pin Description: ADUM1301BRWZ-RL Pin Definition and Functions
Pin Name Function
1 VDD1 Side 1 supply (2.7-5.5V)
2 VIA Channel A input (forward)
3 VIB Channel B input (forward)
4 VOC Channel C output (reverse)
5 GND1 Side 1 ground
9 GND2 Side 2 ground
10 VOA Channel A output (forward)
11 VOB Channel B output (forward)
12 VIC Channel C input (reverse)
13 VDD2 Side 2 supply (2.7-5.5V)
Application Scenarios: In which products and applications is ADUM1301BRWZ-RL used
  • SPI bus isolation for isolated ADC/DAC data acquisition systems
  • Isolated UART communication in motor drive control interfaces
  • Switch-mode power supply feedback loop isolation
  • Industrial digital I/O module signal isolation
  • Medical equipment patient-connected interface isolation
Alternative Models: What chips are recommended as replacements for ADUM1301BRWZ-RL
Model Manufacturer Key Difference
ADUM1301BRWZ Analog Devices Tube packaging
ADUM1300BRWZ-RL Analog Devices 3 forward channels
ADUM1301CARWZ-RL Analog Devices 0-150Mbps high-speed
SI8631BC-B-IS Silicon Labs 3-ch, 150Mbps, narrow SOIC
ISO7231CDWR TI 3-ch, 150Mbps, SOIC-16

Recommend Parts

IRFS4310ZTRLPBF

IRFS4310ZTRLPBF – 100V N-Channel HEXFET Power MOSFET, 7 mΩ RDS(on), D2PAK (TO-263AB)

Brand: infineon

Package: D2PAK (TO-263AB)

IN STOCK: 11137pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MSASJ105BB5475MFNA01

4.7uF 6.3V X5R MLCC, 0402, Taiyo Yuden

Brand: gigadevice

Package: 0402 (1005 Metric, 1.0 x 0.5 x 0.5 mm)

IN STOCK: 9701pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRF3415PBF

150V N-channel power MOSFET, 43A, 41mΩ RDS(on), TO-220AB package

Brand: infineon

Package: TO-220AB

IN STOCK: 2940pcs

Cargo cycle: 3-7 Days

The minimum order is 1

105017-1001

USB Type-C receptacle connector, 24-pin, SMD

Brand: Amphenol

Package: SMD (8.9 x 7.3 x 3.2 mm, right angle)

IN STOCK: 5335pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRLB3034PBF

IRLB3034PBF – 40V N-Channel StrongIRFET Power MOSFET (Logic Level), 1.7 mΩ (max) @ 10V; 2.0 mΩ @ 4.5V RDS(on), TO-220AB

Brand: infineon

Package: TO-220AB

IN STOCK: 9724pcs

Cargo cycle: 3-7 Days

The minimum order is 1

XC6SLX75-2FGG484I

Spartan-6 LX75 FPGA, 74637 logic cells, 132 DSP, 3096KB BRAM, 408 I/O, FBGA-484 23x23mm, -2 speed, industrial -40~100C, AMD Xilinx

Brand: xilinx

Package: FGG484 (484-ball fine-pitch BGA, 23x23mm body, 1.0mm ball pitch, 22×22 ball array, 6 I/O banks, lead-free)

IN STOCK: 890pcs

Cargo cycle: 3-7 Days

The minimum order is 1