Opens in a new tab

BSP452

Smart high-side switch, 45V, 2.2A, 200mOhm, logic input, SOT-223

9876

Effective Inventory

Image for reference only

Manufacturer Part:

BSP452

Package:

SOT-223 (6.5 x 3.5 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The BSP452 from Infineon Technologies is an N-channel logic-level power MOSFET integrated as a smart high-side switch in a SOT-223 package. Rated at 45V, 2.2A with integrated overtemperature and short-circuit protection, it provides a complete protected power switch solution for automotive and industrial loads.

Key Specifications

Type N-channel smart high-side switch
Operating Voltage 5 V to 45 V
On-Resistance 200 mOhm (typical)
Continuous Current 2.2 A
Input Logic CMOS compatible (3.3V/5V)
Protection Overtemperature, short circuit, overvoltage
Diagnosis Status flag output
Package SOT-223
Operating Temperature -40 to +150 C (Tj)

Features

  • Integrated power MOSFET with driver and protection circuits
  • Logic-level CMOS input compatible with 3.3V and 5V microcontrollers
  • Overtemperature shutdown with automatic restart
  • Short-circuit protection with current limitation
  • Status flag output for fault diagnosis
  • ESD protection on input and output pins

Applications

  • Automotive lamp and LED driver switching
  • Solenoid and relay driver with protection
  • Industrial resistive heater control
  • Distribution panel load switching
  • Microcontroller GPIO power expansion
Product Introduction: BSP452 Product Introduction

The BSP452 from Infineon Technologies is a monolithic smart high-side power switch that integrates an N-channel power MOSFET with its gate driver, charge pump, and comprehensive protection circuits in a compact SOT-223 package. The device operates from a 5V to 45V supply and can switch loads up to 2.2A continuous current with a typical on-resistance of 200mOhm. The CMOS-compatible logic input (IN) allows direct interface with 3.3V or 5V microcontrollers, while the integrated charge pump ensures the MOSFET is fully enhanced even at low supply voltages. Protection features include overtemperature shutdown with automatic restart, short-circuit current limitation, and overvoltage clamping.

Working Principle: BSP452 Working Principle

The BSP452 operates as a fully integrated smart high-side power switch. (1) The input logic (IN pin) controls the gate driver circuit, which drives the internal N-channel power MOSFET between the VS (supply) and OUT (load) terminals. The integrated charge pump generates a gate voltage above VS to fully enhance the MOSFET, ensuring low on-resistance even at low supply voltages. (2) The overtemperature protection monitors the die temperature and shuts down the MOSFET when the junction exceeds the threshold. After cooling by the hysteresis margin, the device automatically restarts. (3) The short-circuit protection limits the output current when a fault is detected, and the status flag (ST) is asserted to signal the fault to the microcontroller.

Pin Description: BSP452 Pin Definition and Functions
Pin Name Function
1 IN Logic input (CMOS, 3.3V/5V)
2 ST Status flag output (open-drain)
3 VS Power supply input (5-45V)
4 OUT Power output to load
Tab GND Ground (heat sink tab)
Application Scenarios: In which products and applications is BSP452 used
  • Automotive lamp, LED, and bulb driver with integrated protection
  • Solenoid and electromagnetic valve driver with short-circuit protection
  • Industrial resistive heater switching with overtemperature safeguard
  • Power distribution panel load switching with status monitoring
  • Microcontroller GPIO power expansion for higher-current loads
Alternative Models: What chips are recommended as replacements for BSP452
Model Manufacturer Key Difference
BSP452H Infineon Automotive qualified
BSP752 Infineon 45V, 3.4A, higher current
BTS4140N Infineon 40V, 1.4A, SOT-223
VNN7NV0413TR STMicroelectronics 40V, 4A, VIPower M0-5
NCV8402ADTRG onsemi 45V, 2.5A, DPAK

Recommend Parts

TMP275AIDR

0.5C I2C temp sensor, 12-bit, 2.7-5.5V, alert output, 8-SOIC

Brand: TI

Package: 8-SOIC (4.90 x 3.91 x 1.50 mm)

IN STOCK: 3681pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IL485E

NVE IL485E IsoLoop isolated RS-485 transceiver, 2.5kVrms isolation, 35Mbps, 16-SOIC WB

Brand: nve

Package: SOIC-16 WB

IN STOCK: 5280pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFS4227TRLPBF

IRFS4227TRLPBF – 200V N-Channel HEXFET PDP Switch Power MOSFET, 26 mΩ RDS(on), D2PAK (TO-263)

Brand: infineon

Package: D2PAK (TO-263)

IN STOCK: 4334pcs

Cargo cycle: 3-7 Days

The minimum order is 1

CD4070BM96

Quad 2-input XOR gate, 3-18V CMOS, 65ns at 10V, SOIC-14

Brand: TI

Package: SOIC-14 (8.75 x 3.9 x 1.5mm)

IN STOCK: 4245pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AB1526

Bluetooth 5.0 Dual Mode Audio SoC, TWS, AAC, Dual-mic ENC, Integrated Charger, BGA

Brand: airoha

Package: BGA

IN STOCK: 25000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

LP2980IM5-5.0

50mA micropower ultra-low-dropout regulator, 5V, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.1 mm)

IN STOCK: 2557pcs

Cargo cycle: 3-7 Days

The minimum order is 1