Opens in a new tab

ENC28J60-I/SO

10BASE-T Ethernet controller, SPI, 8KB RAM, MAC+PHY, SOIC-28

5678

Effective Inventory

Image for reference only

Manufacturer Part:

ENC28J60-I/SO

Package:

SOIC-28 (17.9 x 7.5 x 2.35 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The ENC28J60-I/SO from Microchip Technology is a stand-alone 10BASE-T Ethernet controller with integrated MAC and PHY, 8KB dual-port buffer RAM, and SPI interface in SOIC-28 package. Compliant with IEEE 802.3, it provides a complete Ethernet network interface for any SPI-equipped microcontroller.

Key Specifications

Speed 10 Mbps (10BASE-T)
Interface SPI (up to 20 MHz)
Buffer RAM 8 Kbyte dual-port SRAM
Standard IEEE 802.3 compliant
DMA Internal DMA for fast copy
LED Outputs 2 (link/activity)
Interrupt Pin 1
Supply Voltage 3.14 V to 3.45 V
Package SOIC-28 (7.50mm wide)
Operating Temperature -40 to +85 C

Features

  • Integrated MAC and 10BASE-T PHY reduces external component count
  • 8KB dual-port buffer with configurable TX/RX partitioning
  • Hardware IP checksum calculation offloads host processor
  • Programmable pattern matching up to 64 bytes for packet filtering
  • Magic Packet wake-up support for remote power management
  • Programmable automatic retransmit on collision

Applications

  • Embedded Ethernet connectivity for SPI-equipped MCUs
  • Industrial and building automation network nodes
  • VoIP telephone interfaces
  • Home control and security system networking
  • Instrumentation remote data logging
Product Introduction: ENC28J60-I/SO Product Introduction

The ENC28J60-I/SO from Microchip Technology is a stand-alone 10BASE-T Ethernet controller with an industry-standard SPI interface, designed to serve as an Ethernet network interface for any microcontroller equipped with SPI. The device integrates both MAC and PHY layers, providing IEEE 802.3 compliance with 8KB of dual-port buffer RAM for transmit and receive packets. An internal DMA module enables fast data throughput, while hardware-assisted IP checksum calculation offloads the host processor. The SPI interface supports clock rates up to 20MHz for high-speed data transfer.

Working Principle: ENC28J60-I/SO Working Principle

The ENC28J60-I/SO operates as a complete Ethernet interface controller. (1) The integrated PHY handles the physical layer signaling for 10BASE-T, including waveform shaping, collision detection, and automatic polarity correction. The MAC layer manages frame formatting, address filtering, and CRC generation/verification. (2) The 8KB dual-port SRAM buffer is divided between transmit and receive regions, configurable by the host. Received packets are placed in a hardware-managed circular receive FIFO, while the internal DMA module enables fast data movement between buffers. (3) The SPI interface provides register access and buffer read/write operations at up to 20MHz clock rate. Pattern matching filters allow the host to sleep until a matching packet arrives, with Magic Packet wake-up for remote power management.

Pin Description: ENC28J60-I/SO Pin Definition and Functions
Pin Group Name Function
1 VSS Ground
2-3 CLKOUT/INT Clock output/Interrupt
4 WOL Wake-on-LAN output
5 SO SPI data out (MISO)
6 SI SPI data in (MOSI)
7 SCK SPI clock
8 CS SPI chip select (active low)
9 RESET Hardware reset
10-11 VDD/RPULA Power and pull-up
12-13 TPIN+/TPIN- Receive inputs (differential)
14-15 TPOUT+/TPOUT- Transmit outputs (differential)
16 VDDTX Transmit power
17-19 VDDPLL/VDDRX/VDDOSC Power rails
20-21 OSC1/OSC2 25MHz crystal
22-23 LEDA/LEDB LED outputs
Application Scenarios: In which products and applications is ENC28J60-I/SO used
  • Embedded Ethernet connectivity for SPI-equipped MCUs without built-in MAC
  • Industrial and building automation network nodes with SPI host interface
  • VoIP telephone interfaces requiring 10Mbps Ethernet
  • Home control and security system remote monitoring via Ethernet
  • Instrumentation remote data logging with TCP/IP stack on host MCU
Alternative Models: What chips are recommended as replacements for ENC28J60-I/SO
Model Manufacturer Key Difference
ENC28J60-I/ML Microchip QFN-28 package (6x6mm)
W5500 WIZnet Hardwired TCP/IP, 10/100Mbps
KSZ8851SNL Microchip 10/100Mbps, SPI, TCP/IP offload
DP83848J TI 10/100 PHY only, MII/RMII
LAN8720A Microchip 10/100 PHY, RMII, small QFN

Recommend Parts

IRFS4310ZTRLPBF

IRFS4310ZTRLPBF – 100V N-Channel HEXFET Power MOSFET, 7 mΩ RDS(on), D2PAK (TO-263AB)

Brand: infineon

Package: D2PAK (TO-263AB)

IN STOCK: 11137pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MSASJ105BB5475MFNA01

4.7uF 6.3V X5R MLCC, 0402, Taiyo Yuden

Brand: gigadevice

Package: 0402 (1005 Metric, 1.0 x 0.5 x 0.5 mm)

IN STOCK: 9701pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRF3415PBF

150V N-channel power MOSFET, 43A, 41mΩ RDS(on), TO-220AB package

Brand: infineon

Package: TO-220AB

IN STOCK: 2940pcs

Cargo cycle: 3-7 Days

The minimum order is 1

105017-1001

USB Type-C receptacle connector, 24-pin, SMD

Brand: Amphenol

Package: SMD (8.9 x 7.3 x 3.2 mm, right angle)

IN STOCK: 5335pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRLB3034PBF

IRLB3034PBF – 40V N-Channel StrongIRFET Power MOSFET (Logic Level), 1.7 mΩ (max) @ 10V; 2.0 mΩ @ 4.5V RDS(on), TO-220AB

Brand: infineon

Package: TO-220AB

IN STOCK: 9724pcs

Cargo cycle: 3-7 Days

The minimum order is 1

XC6SLX75-2FGG484I

Spartan-6 LX75 FPGA, 74637 logic cells, 132 DSP, 3096KB BRAM, 408 I/O, FBGA-484 23x23mm, -2 speed, industrial -40~100C, AMD Xilinx

Brand: xilinx

Package: FGG484 (484-ball fine-pitch BGA, 23x23mm body, 1.0mm ball pitch, 22×22 ball array, 6 I/O banks, lead-free)

IN STOCK: 890pcs

Cargo cycle: 3-7 Days

The minimum order is 1