Opens in a new tab

Home » Integrated Circuits ICs, Interface ICs » S25FL127SABMFI103

S25FL127SABMFI103

128Mbit SPI Flash, Quad SPI, 108MHz, SOIC-16

6543

Effective Inventory

Image for reference only

Manufacturer Part:

S25FL127SABMFI103

Package:

16-SOIC (10.3 x 7.5 x 2.35 mm, 300mil)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The S25FL127SABMFI103 from Infineon Technologies (formerly Cypress) is a 128Mbit (16MB) 3.0V FL-S SPI Flash memory supporting Single/Dual/Quad SPI in 16-pin SOIC package. With 108MHz clock and uniform 256KB sectors.

Key Specifications

Density 128 Mbit (16 MB)
Interface SPI, Dual SPI, Quad SPI
Supply Voltage 2.7V to 3.6V
Max Clock Rate 108 MHz
Sector Size 256 KB uniform
Page Size 256 Bytes
Erase Cycles 100K minimum per sector
Data Retention 20 years
Package 16-SOIC (300mil)
Operating Temperature -40 to +85 C

Features

  • Quad SPI interface for 4x throughput vs standard SPI
  • Uniform 256KB sector architecture for flexible partitioning
  • 108MHz clock rate enables 432Mbps effective data rate in Quad mode
  • Deep power-down mode with 5uA standby current
  • Advanced sector protection with password lock

Applications

  • Embedded system boot code and firmware storage
  • Automotive infotainment and ADAS data logging
  • Industrial FPGA configuration storage
  • Networking equipment firmware and parameter storage
  • Consumer electronics code and data storage
Product Introduction: S25FL127SABMFI103 Product Introduction

The S25FL127SABMFI103 from Infineon Technologies (formerly Cypress Semiconductor) is a 128Mbit (16MB) FL-S series SPI Flash memory device operating at 3.0V with Single/Dual/Quad SPI interface support. The device features uniform 256KB sector architecture, 108MHz maximum clock frequency (432Mbps effective in Quad SPI mode), and advanced security features including password-protected sector locking. The deep power-down mode reduces standby current to 5uA for battery-powered applications. The ABMFI103 ordering code specifies 128Mbit density, SOIC-16 package, and industrial temperature range.

Working Principle: S25FL127SABMFI103 Working Principle

The S25FL127SABMFI103 operates as a serial peripheral interface (SPI) Flash memory. (1) The memory array is organized as 64 uniform 256KB sectors, each containing 1024 pages of 256 bytes. Read, program, and erase operations are initiated through SPI commands. In Quad SPI mode (QIO), data is transferred on 4 lines simultaneously, achieving 4x the throughput of standard SPI at the same clock frequency. (2) Page programming loads up to 256 bytes into an internal buffer, then programs the page in approximately 1ms typical. Sector erase clears all bits in a 256KB sector to 1 (0xFF) in approximately 1 second. The 100K cycle endurance per sector is managed by wear-leveling algorithms in the host firmware. (3) The advanced sector protection allows password-based locking of individual sectors, preventing unauthorized modification of boot code and critical firmware. The volatile and non-volatile protection bits provide flexible protection schemes.

Pin Description: S25FL127SABMFI103 Pin Definition and Functions
Pin Name Function
1 CS# Chip Select (active low)
2 SO/IO1 Data Out / IO1 (Dual/Quad)
3 WP#/IO2 Write Protect / IO2 (Quad)
4 VSS Ground
5 SI/IO0 Data In / IO0 (Dual/Quad)
6 SCK Serial Clock
7 HOLD#/IO3 Hold / IO3 (Quad)
8 VDD Power Supply (2.7-3.6V)
9-16 NC/VSS No Connect / Ground
Application Scenarios: In which products and applications is S25FL127SABMFI103 used
  • Embedded system boot code and firmware storage with Quad SPI for fast boot
  • Automotive infotainment and ADAS data logging with sector protection
  • Industrial FPGA configuration storage with in-system programming
  • Networking equipment firmware and parameter storage with wear leveling
  • Consumer electronics code and data storage with deep power-down
Alternative Models: What chips are recommended as replacements for S25FL127SABMFI103
Model Manufacturer Key Difference
S25FL256SAGMFI101 Infineon 256Mbit, same family, higher density
W25Q128JVSIM Winbond 128Mbit, SOIC-8, equivalent
MX25L12835FMI-10G Macronix 128Mbit, SOIC-16, equivalent
SST26VF016B-104I/SN Microchip 16Mbit, SQI, smaller density
MT25QU128ABA8GSE Micron 128Mbit, QSPI, similar

Recommend Parts

IRFS4310ZTRLPBF

IRFS4310ZTRLPBF – 100V N-Channel HEXFET Power MOSFET, 7 mΩ RDS(on), D2PAK (TO-263AB)

Brand: infineon

Package: D2PAK (TO-263AB)

IN STOCK: 11137pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MSASJ105BB5475MFNA01

4.7uF 6.3V X5R MLCC, 0402, Taiyo Yuden

Brand: gigadevice

Package: 0402 (1005 Metric, 1.0 x 0.5 x 0.5 mm)

IN STOCK: 9701pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRF3415PBF

150V N-channel power MOSFET, 43A, 41mΩ RDS(on), TO-220AB package

Brand: infineon

Package: TO-220AB

IN STOCK: 2940pcs

Cargo cycle: 3-7 Days

The minimum order is 1

105017-1001

USB Type-C receptacle connector, 24-pin, SMD

Brand: Amphenol

Package: SMD (8.9 x 7.3 x 3.2 mm, right angle)

IN STOCK: 5335pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRLB3034PBF

IRLB3034PBF – 40V N-Channel StrongIRFET Power MOSFET (Logic Level), 1.7 mΩ (max) @ 10V; 2.0 mΩ @ 4.5V RDS(on), TO-220AB

Brand: infineon

Package: TO-220AB

IN STOCK: 9724pcs

Cargo cycle: 3-7 Days

The minimum order is 1

XC6SLX75-2FGG484I

Spartan-6 LX75 FPGA, 74637 logic cells, 132 DSP, 3096KB BRAM, 408 I/O, FBGA-484 23x23mm, -2 speed, industrial -40~100C, AMD Xilinx

Brand: xilinx

Package: FGG484 (484-ball fine-pitch BGA, 23x23mm body, 1.0mm ball pitch, 22×22 ball array, 6 I/O banks, lead-free)

IN STOCK: 890pcs

Cargo cycle: 3-7 Days

The minimum order is 1