Opens in a new tab

LT1513CR#TRPBF

500kHz SEPIC battery charger, multi-chemistry, DDPAK-7

2345

Effective Inventory

Image for reference only

Manufacturer Part:

LT1513CR#TRPBF

Package:

DDPAK-7 (10.4 x 7.5 x 4.6 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The LT1513CR#TRPBF from Analog Devices is a 500kHz current-mode SEPIC battery charger IC supporting multi-chemistry (Li-Ion, NiMH, Lead-Acid) charging from a 6V to 25V input in DDPAK-7 package.

Key Specifications

Topology SEPIC battery charger
Switching Frequency 500 kHz
Input Voltage Range 6 V to 25 V
Charge Current Programmable (up to 1.2A)
Battery Chemistry Li-Ion, NiMH, Lead-Acid
Switch Current Limit 2A internal
Switch Voltage 25V max
Accuracy +/-1% voltage, +/-5% current
Package DDPAK-7 (CR suffix)
Operating Temperature -40 to +125 C

Features

  • SEPIC topology allows VBAT higher or lower than VIN
  • Multi-chemistry support with programmable voltage and current
  • 500kHz switching frequency minimizes external component size
  • 2A internal switch eliminates external MOSFET
  • +/-1% charge voltage accuracy for Li-Ion safety

Applications

  • Single-cell Li-Ion battery charger from automotive input
  • NiMH battery pack charger
  • Lead-Acid battery maintenance charger
  • Portable equipment docking station charger
  • Solar panel battery charging system
Product Introduction: LT1513CR#TRPBF Product Introduction

The LT1513CR#TRPBF from Analog Devices is a 500kHz current-mode switching regulator specifically configured as a battery charger using the SEPIC topology. The SEPIC topology uniquely allows the battery voltage to be either higher or lower than the input voltage, making it ideal for charging from variable sources such as automotive supplies (6-25V). The device supports Li-Ion, NiMH, and Lead-Acid battery chemistries with programmable charge voltage and current. The 2A internal power switch eliminates the need for an external MOSFET, and the +/-1% charge voltage accuracy ensures safe Li-Ion charging. The CR suffix denotes DDPAK-7 package, TRPBF indicates tape and reel with lead-free finish.

Working Principle: LT1513CR#TRPBF Working Principle

The LT1513CR#TRPBF operates as a current-mode SEPIC battery charger. (1) The SEPIC topology uses a coupling capacitor (Ccouple) to transfer energy from input to output while maintaining DC isolation between input and output. This allows the output (battery) voltage to be either higher or lower than the input voltage, unlike a buck charger which requires VIN > VBAT. When the switch is on, energy is stored in the inductor and Ccouple charges. When the switch is off, energy is transferred through the diode to the battery. (2) The current-mode control loop senses the switch current and compares it with the error amplifier output to regulate either charge current or charge voltage. For Li-Ion batteries, the charger operates in constant-current mode until the battery reaches the programmed float voltage, then transitions to constant-voltage mode. (3) The charge current is programmed by a resistor from the PROG pin to ground, and the charge voltage is set by an external resistor divider from the battery to the VFB pin. The +/-1% voltage accuracy ensures the battery is charged to the correct float voltage for safety and longevity.

Pin Description: LT1513CR#TRPBF Pin Definition and Functions
Pin Name Function
1 SW Switch output (to inductor/diode)
2 GND Ground
3 VC Compensation pin for control loop
4 VFB Voltage feedback input
5 PROG Charge current programming
6 VIN Input supply (6-25V)
7 GND Ground (tab)
Application Scenarios: In which products and applications is LT1513CR#TRPBF used
  • Single-cell Li-Ion (4.2V) battery charger from automotive 12V supply using SEPIC topology
  • NiMH battery pack charger with constant-current termination
  • Lead-Acid battery maintenance charger with float voltage regulation
  • Portable equipment docking station charger with multi-chemistry support
  • Solar panel battery charging system where input voltage varies widely
Alternative Models: What chips are recommended as replacements for LT1513CR#TRPBF
Model Manufacturer Key Difference
LT1512CS8#PBF Analog Devices 200kHz, SOIC-8, same family
LT3650EMSE-8.2 Analog Devices Buck charger, 2A, Li-Ion 8.2V
BQ24650RVAT TI Buck, solar MPPT, 5A, QFN
MCP73871-2CCI/ML Microchip Linear charger, Li-Ion, QFN
LT3741EMSE#PBF Analog Devices SEPIC, constant current LED driver

Recommend Parts

IRFS4310ZTRLPBF

IRFS4310ZTRLPBF – 100V N-Channel HEXFET Power MOSFET, 7 mΩ RDS(on), D2PAK (TO-263AB)

Brand: infineon

Package: D2PAK (TO-263AB)

IN STOCK: 11137pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MSASJ105BB5475MFNA01

4.7uF 6.3V X5R MLCC, 0402, Taiyo Yuden

Brand: gigadevice

Package: 0402 (1005 Metric, 1.0 x 0.5 x 0.5 mm)

IN STOCK: 9701pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRF3415PBF

150V N-channel power MOSFET, 43A, 41mΩ RDS(on), TO-220AB package

Brand: infineon

Package: TO-220AB

IN STOCK: 2940pcs

Cargo cycle: 3-7 Days

The minimum order is 1

105017-1001

USB Type-C receptacle connector, 24-pin, SMD

Brand: Amphenol

Package: SMD (8.9 x 7.3 x 3.2 mm, right angle)

IN STOCK: 5335pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRLB3034PBF

IRLB3034PBF – 40V N-Channel StrongIRFET Power MOSFET (Logic Level), 1.7 mΩ (max) @ 10V; 2.0 mΩ @ 4.5V RDS(on), TO-220AB

Brand: infineon

Package: TO-220AB

IN STOCK: 9724pcs

Cargo cycle: 3-7 Days

The minimum order is 1

XC6SLX75-2FGG484I

Spartan-6 LX75 FPGA, 74637 logic cells, 132 DSP, 3096KB BRAM, 408 I/O, FBGA-484 23x23mm, -2 speed, industrial -40~100C, AMD Xilinx

Brand: xilinx

Package: FGG484 (484-ball fine-pitch BGA, 23x23mm body, 1.0mm ball pitch, 22×22 ball array, 6 I/O banks, lead-free)

IN STOCK: 890pcs

Cargo cycle: 3-7 Days

The minimum order is 1