Opens in a new tab

Home » Integrated Circuits ICs, Interface ICs » SST26VF016B-104I/SN

SST26VF016B-104I/SN

16Mbit SQI Flash, 104MHz, SOIC-8

5678

Effective Inventory

Image for reference only

Manufacturer Part:

SST26VF016B-104I/SN

Package:

SOIC-8 (5.9 x 3.9 x 1.5 mm, 150mil)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The SST26VF016B-104I/SN from Microchip Technology is a 16Mbit (2MB) Serial Quad I/O (SQI) Flash memory with 104MHz clock in SOIC-8 package. Supports 4-bit data I/O for high-speed code execution.

Key Specifications

Density 16 Mbit (2 MB)
Interface SPI / Quad SPI (SQI)
Supply Voltage 2.3V to 3.6V
Max Clock Rate 104 MHz
Effective Throughput 416 Mbps (Quad mode)
Sector Size 4 KB uniform
Block Size 32KB / 64KB
Page Size 256 Bytes
Erase Cycles 100K minimum
Data Retention 20 years
Package SOIC-8 (150mil)
Operating Temperature -40 to +85 C

Features

  • Serial Quad I/O (SQI) for 4x throughput in small 8-pin package
  • 104MHz clock with 416Mbps effective data rate in SQI mode
  • Uniform 4KB sector architecture for flexible data management
  • Software reset and global block protection unlock
  • Fast erase: 18ms sector, 35ms chip erase typical

Applications

  • Embedded MCU boot code with execute-in-place (XIP)
  • Data logging in industrial and automotive systems
  • FPGA configuration storage
  • IoT device firmware update storage
  • Consumer electronics parameter storage
Product Introduction: SST26VF016B-104I/SN Product Introduction

The SST26VF016B-104I/SN from Microchip Technology is a 16Mbit (2MB) Serial Quad I/O (SQI) Flash memory device supporting standard SPI and Quad SPI modes with 104MHz maximum clock frequency. In SQI mode, data is transferred on 4 pins simultaneously, achieving 416Mbps effective throughput for fast code execution via execute-in-place (XIP). The device features uniform 4KB sectors for flexible data management, fast erase times (18ms sector, 35ms chip), and 100K minimum erase cycle endurance. The 104I suffix denotes 104MHz speed grade with industrial temperature range, and SN denotes SOIC-8 package.

Working Principle: SST26VF016B-104I/SN Working Principle

The SST26VF016B-104I/SN operates as a serial Quad I/O Flash memory. (1) The memory array is organized as 512 uniform 4KB sectors. In standard SPI mode, data is transferred serially on one data pin at up to 104MHz. In SQI mode, address and data are transferred on 4 pins simultaneously, quadrupling the effective data rate to 416Mbps. (2) Read operations in SQI mode can achieve XIP (execute-in-place) performance suitable for direct MCU code execution without shadowing to RAM. The 4KB uniform sectors allow fine-grained storage management, while 32KB and 64KB blocks enable efficient bulk erase. (3) Write operations follow the standard Flash sequence: write-enable command, then page-program command (up to 256 bytes per program). The fast 18ms sector erase and 35ms chip erase times minimize system downtime during firmware updates. The global block protection unlock command simplifies production programming.

Pin Description: SST26VF016B-104I/SN Pin Definition and Functions
Pin Name Function
1 CE# Chip Enable (active low)
2 SO/IO1 Serial Out / IO1
3 WP#/IO2 Write Protect / IO2
4 VSS Ground
5 SI/IO0 Serial In / IO0
6 SCK Serial Clock
7 HOLD#/IO3 Hold / IO3
8 VDD Power Supply (2.3-3.6V)
Application Scenarios: In which products and applications is SST26VF016B-104I/SN used
  • Embedded MCU boot code with execute-in-place (XIP) via SQI for fast boot
  • Data logging in industrial and automotive systems with 4KB sector granularity
  • FPGA configuration storage with fast read for initialization
  • IoT device firmware update storage with uniform sector architecture
  • Consumer electronics parameter and calibration data storage
Alternative Models: What chips are recommended as replacements for SST26VF016B-104I/SN
Model Manufacturer Key Difference
SST26VF032B-104I/SN Microchip 32Mbit, same family, higher density
W25Q16JVSNIQ Winbond 16Mbit, QSPI, SOIC-8, equivalent
MX25L1633FM2I-10G Macronix 16Mbit, QSPI, equivalent
S25FL116K0XMFI041 Infineon 16Mbit, SPI, SOIC-8
AT25SF161 Dialog/Renesas 16Mbit, SPI, SOIC-8

Recommend Parts

IRFS4310ZTRLPBF

IRFS4310ZTRLPBF – 100V N-Channel HEXFET Power MOSFET, 7 mΩ RDS(on), D2PAK (TO-263AB)

Brand: infineon

Package: D2PAK (TO-263AB)

IN STOCK: 11137pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MSASJ105BB5475MFNA01

4.7uF 6.3V X5R MLCC, 0402, Taiyo Yuden

Brand: gigadevice

Package: 0402 (1005 Metric, 1.0 x 0.5 x 0.5 mm)

IN STOCK: 9701pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRF3415PBF

150V N-channel power MOSFET, 43A, 41mΩ RDS(on), TO-220AB package

Brand: infineon

Package: TO-220AB

IN STOCK: 2940pcs

Cargo cycle: 3-7 Days

The minimum order is 1

105017-1001

USB Type-C receptacle connector, 24-pin, SMD

Brand: Amphenol

Package: SMD (8.9 x 7.3 x 3.2 mm, right angle)

IN STOCK: 5335pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRLB3034PBF

IRLB3034PBF – 40V N-Channel StrongIRFET Power MOSFET (Logic Level), 1.7 mΩ (max) @ 10V; 2.0 mΩ @ 4.5V RDS(on), TO-220AB

Brand: infineon

Package: TO-220AB

IN STOCK: 9724pcs

Cargo cycle: 3-7 Days

The minimum order is 1

XC6SLX75-2FGG484I

Spartan-6 LX75 FPGA, 74637 logic cells, 132 DSP, 3096KB BRAM, 408 I/O, FBGA-484 23x23mm, -2 speed, industrial -40~100C, AMD Xilinx

Brand: xilinx

Package: FGG484 (484-ball fine-pitch BGA, 23x23mm body, 1.0mm ball pitch, 22×22 ball array, 6 I/O banks, lead-free)

IN STOCK: 890pcs

Cargo cycle: 3-7 Days

The minimum order is 1