Opens in a new tab

TPS7A6633QDGNRQ1

3.3V 150mA automotive LDO, AEC-Q100, HVSSOP-8

6789

Effective Inventory

Image for reference only

Manufacturer Part:

TPS7A6633QDGNRQ1

Package:

HVSSOP-8 (3 x 3 x 0.9 mm, exposed pad)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The TPS7A6633QDGNRQ1 from Texas Instruments is an automotive AEC-Q100 qualified 3.3V fixed-output LDO regulator with 150mA output, ultra-low Iq, and power-good output in HVSSOP-8 package.

Key Specifications

Output Voltage 3.3 V fixed
Output Current 150 mA
Dropout Voltage 300 mV @ 150mA
Input Voltage 4 V to 40 V
Quiescent Current 25 uA typical
PSRR 65 dB @ 1kHz
Output Noise 30 uV RMS
Power-Good Yes (open-drain)
Enable Yes
AEC-Q100 Yes (Grade 1)
Package HVSSOP-8 (exposed pad)
Operating Temperature -40 to +125 C

Features

  • AEC-Q100 Grade 1 qualified for automotive applications
  • 4V to 40V wide input range for automotive battery direct connection
  • 25uA ultra-low quiescent current for always-on systems
  • Power-good output for power sequencing and monitoring
  • 65dB PSRR for clean output from noisy automotive supply

Applications

  • Automotive ECU always-on power supply
  • Infotainment system standby power Sensor module 3.3V supply from 12V battery Automotive body controller power Telematics module power supply
Product Introduction: TPS7A6633QDGNRQ1 Product Introduction

The TPS7A6633QDGNRQ1 from Texas Instruments is an automotive-grade 3.3V fixed-output low-dropout (LDO) regulator qualified to AEC-Q100 Grade 1. The device operates from a 4V to 40V input, enabling direct connection to automotive 12V battery systems. The 25uA quiescent current is ideal for always-on applications such as ECU standby power. The integrated power-good (PG) output provides power sequencing capability, and the 65dB PSRR at 1kHz ensures clean output from the noisy automotive supply rail. The 33 suffix denotes 3.3V fixed output, DGN denotes HVSSOP-8 with exposed pad, R indicates tape and reel, and Q1 indicates AEC-Q100 automotive qualification.

Working Principle: TPS7A6633QDGNRQ1 Working Principle

The TPS7A6633QDGNRQ1 operates as a high-voltage automotive LDO regulator. (1) The high-voltage PMOS pass element allows input voltages up to 40V while maintaining stable 3.3V output at 150mA. The dropout voltage of 300mV at full load means the minimum input voltage for regulation is 3.6V. (2) The 25uA quiescent current is achieved through a low-power bias network that keeps the error amplifier and reference active while consuming minimal current. This is critical for always-on automotive ECU power supplies that must operate even when the vehicle is parked. (3) The power-good (PG) comparator monitors the output voltage and asserts the open-drain PG output when the output is within the regulation window. This enables downstream power sequencing in multi-rail automotive systems. The enable (EN) pin allows the LDO to be turned off, reducing quiescent current to less than 1uA in shutdown mode.

Pin Description: TPS7A6633QDGNRQ1 Pin Definition and Functions
Pin Name Function
1 EN Enable input (active high)
2 IN Input supply (4-40V)
3 IN Input supply
4 NC No connect
5 PG Power-good output (open drain)
6 GND Ground
7 GND Ground
8 OUT 3.3V regulated output
EP GND Exposed pad (thermal/GND)
Application Scenarios: In which products and applications is TPS7A6633QDGNRQ1 used
  • Automotive ECU always-on 3.3V power supply from 12V battery with 25uA Iq
  • Infotainment system standby power maintaining MCU while vehicle is parked
  • Sensor module 3.3V supply directly from 12V battery with PG monitoring
  • Automotive body controller power supply with enable sequencing
  • Telematics module 3.3V power with power-good for system reset control
Alternative Models: What chips are recommended as replacements for TPS7A6633QDGNRQ1
Model Manufacturer Key Difference
TPS7A6650QDGNRQ1 TI 5V fixed output, same family
TPS7A7001AQDGNRQ1 TI Adjustable output, higher current
NCV8186AMT330TAG onsemi 3.3V, 300mA, AEC-Q100, DFN
TLE4274QKTTO1 Infineon 3.3V, 200mA, AEC-Q100, SOT-223
AP7365-33YG-13 Diodes 3.3V, 500mA, AEC-Q100, TO-252

Recommend Parts

TMP275AIDR

0.5C I2C temp sensor, 12-bit, 2.7-5.5V, alert output, 8-SOIC

Brand: TI

Package: 8-SOIC (4.90 x 3.91 x 1.50 mm)

IN STOCK: 3681pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IL485E

NVE IL485E IsoLoop isolated RS-485 transceiver, 2.5kVrms isolation, 35Mbps, 16-SOIC WB

Brand: nve

Package: SOIC-16 WB

IN STOCK: 5280pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFS4227TRLPBF

IRFS4227TRLPBF – 200V N-Channel HEXFET PDP Switch Power MOSFET, 26 mΩ RDS(on), D2PAK (TO-263)

Brand: infineon

Package: D2PAK (TO-263)

IN STOCK: 4334pcs

Cargo cycle: 3-7 Days

The minimum order is 1

CD4070BM96

Quad 2-input XOR gate, 3-18V CMOS, 65ns at 10V, SOIC-14

Brand: TI

Package: SOIC-14 (8.75 x 3.9 x 1.5mm)

IN STOCK: 4245pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AB1526

Bluetooth 5.0 Dual Mode Audio SoC, TWS, AAC, Dual-mic ENC, Integrated Charger, BGA

Brand: airoha

Package: BGA

IN STOCK: 25000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

LP2980IM5-5.0

50mA micropower ultra-low-dropout regulator, 5V, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.1 mm)

IN STOCK: 2557pcs

Cargo cycle: 3-7 Days

The minimum order is 1