Opens in a new tab

TPS54060DGQ

60V 0.5A buck DC-DC, Eco-Mode, MSOP-10

5678

Effective Inventory

Image for reference only

Manufacturer Part:

TPS54060DGQ

Package:

MSOP-10 PowerPAD (3 x 3 x 0.9 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The TPS54060DGQ from Texas Instruments is a 0.5A, 60V step-down DC-DC converter with Eco-Mode for high light-load efficiency in MSOP-10 PowerPAD package.

Key Specifications

Topology Step-down (buck) DC-DC converter
Input Voltage 3.5V to 60V
Output Current 0.5A
Output Voltage Adjustable (0.8V reference)
Switching Frequency 50kHz to 2500kHz (programmable)
Eco-Mode Yes (pulse skipping at light load)
PWRGD Output Yes
Enable Yes (UVLO programmable)
Synchronous No (requires external Schottky diode)
Package MSOP-10 PowerPAD (DGQ suffix)
Operating Temperature -40 to +125 C

Features

  • 60V maximum input for automotive and industrial 24V/48V systems
  • Eco-Mode maintains high efficiency at light loads
  • Programmable switching frequency via external resistor
  • PWRGD output for power sequencing and monitoring
  • External synchronization via RT/CLK pin

Applications

  • Industrial 24V and 48V power supply
  • Automotive 12V/24V auxiliary power Battery-powered instrumentation LED driver bias supply Telecom 48V distributed power
Product Introduction: TPS54060DGQ Product Introduction

The TPS54060DGQ from Texas Instruments is a 60V, 0.5A step-down DC-DC converter with integrated high-side N-channel MOSFET in MSOP-10 PowerPAD package. The device operates from a 3.5V to 60V input, making it suitable for automotive 12V/24V and industrial 24V/48V power systems. The adjustable switching frequency (50kHz to 2500kHz) is set by an external resistor on the RT/CLK pin, which also accepts an external clock for synchronization. The Eco-Mode pulse-skipping operation maintains high efficiency at light loads, while the PWRGD output enables power sequencing. The DGQ suffix denotes MSOP-10 with PowerPAD for thermal enhancement.

Working Principle: TPS54060DGQ Working Principle

The TPS54060DGQ operates as a current-mode step-down (buck) DC-DC converter. (1) The high-side N-channel MOSFET connects the input voltage to the LC output filter. When the switch is on, current ramps up through the inductor. When the switch turns off, the inductor current freewheels through the external Schottky catch diode. The output voltage is regulated by adjusting the duty cycle of the switch. (2) The current-mode control loop senses the switch current and compares it with the error amplifier output to determine the switch on-time. This provides inherent cycle-by-cycle current limiting and simplifies loop compensation. The 0.8V reference voltage sets the output voltage via an external resistor divider. (3) In Eco-Mode, the device skips switching pulses at light loads to reduce switching losses. When the inductor current reaches zero, the high-side MOSFET is not turned on again until the output voltage drops below the regulation threshold. This maintains high efficiency at loads below 100mA where switching losses would otherwise dominate.

Pin Description: TPS54060DGQ Pin Definition and Functions
Pin Name Function
1 BOOT Bootstrap capacitor for high-side driver
2 VIN Input supply (3.5-60V)
3 EN Enable / UVLO programming
4 SS/TR Soft-start / tracking
5 COMP Error amplifier compensation
6 VSENSE Voltage feedback (0.8V reference)
7 RT/CLK Frequency setting / external sync
8 PWRGD Power-good output (open drain)
9 PH Switch node (to inductor/diode)
10 GND Ground (PowerPAD)
Application Scenarios: In which products and applications is TPS54060DGQ used
  • Industrial 24V and 48V power supply for PLCs and sensors
  • Automotive 12V/24V auxiliary power with 60V transient withstand
  • Battery-powered instrumentation with Eco-Mode light-load efficiency
  • LED driver bias supply with programmable frequency
  • Telecom 48V distributed power architecture point-of-load converter
Alternative Models: What chips are recommended as replacements for TPS54060DGQ
Model Manufacturer Key Difference
TPS54160DGQ TI 1.5A output, same family
LM5017MM/NOPB TI 100V, 0.6A, constant on-time
LMR16006XDDCR TI 60V, 0.6A, SOT-23-THIN
MAX17503ATB+T ADI 60V, 0.5A, uSLIC, TDFN
R8600S Richtek 60V, 0.6A, SOT-23-6

Recommend Parts

TMP275AIDR

0.5C I2C temp sensor, 12-bit, 2.7-5.5V, alert output, 8-SOIC

Brand: TI

Package: 8-SOIC (4.90 x 3.91 x 1.50 mm)

IN STOCK: 3681pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IL485E

NVE IL485E IsoLoop isolated RS-485 transceiver, 2.5kVrms isolation, 35Mbps, 16-SOIC WB

Brand: nve

Package: SOIC-16 WB

IN STOCK: 5280pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFS4227TRLPBF

IRFS4227TRLPBF – 200V N-Channel HEXFET PDP Switch Power MOSFET, 26 mΩ RDS(on), D2PAK (TO-263)

Brand: infineon

Package: D2PAK (TO-263)

IN STOCK: 4334pcs

Cargo cycle: 3-7 Days

The minimum order is 1

CD4070BM96

Quad 2-input XOR gate, 3-18V CMOS, 65ns at 10V, SOIC-14

Brand: TI

Package: SOIC-14 (8.75 x 3.9 x 1.5mm)

IN STOCK: 4245pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AB1526

Bluetooth 5.0 Dual Mode Audio SoC, TWS, AAC, Dual-mic ENC, Integrated Charger, BGA

Brand: airoha

Package: BGA

IN STOCK: 25000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

LP2980IM5-5.0

50mA micropower ultra-low-dropout regulator, 5V, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.1 mm)

IN STOCK: 2557pcs

Cargo cycle: 3-7 Days

The minimum order is 1