Opens in a new tab

UCC27524DR

Dual 5A low-side gate driver, -5V input, SOIC-8

8901

Effective Inventory

Image for reference only

Manufacturer Part:

UCC27524DR

Package:

SOIC-8 (4.9 x 3.9 x 1.5 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The UCC27524DR from Texas Instruments is a dual 5A high-speed low-side gate driver with negative input voltage capability in SOIC-8 package. Designed for MOSFET and IGBT gate drive applications.

Key Specifications

Channels 2 (dual non-inverting)
Peak Output Current 5A source / 5A sink
Propagation Delay 25 ns typical
Rise/Fall Time 15 ns / 12 ns typical @ 1.8nF
Supply Voltage 4.5V to 18V
Negative Input Voltage -5V continuous on IN pins
Input Threshold TTL/CMOS compatible
Enable Yes (per channel, active high)
Package SOIC-8 (D suffix)
Operating Temperature -40 to +125 C

Features

  • Dual 5A peak output for driving large MOSFET/IGBT gates
  • -5V negative input voltage capability for noisy environments
  • 25ns low propagation delay for high-frequency switching
  • Independent enable pins for each channel
  • Split output pins (OUTH/OUTL) for independent gate resistors

Applications

  • Motor drive inverter MOSFET/IGBT gate drive
  • Solar inverter switching stage driver
  • Switch-mode power supply gate driver
  • DC-DC converter synchronous rectifier driver
  • Class-D audio amplifier output stage driver
Product Introduction: UCC27524DR Product Introduction

The UCC27524DR from Texas Instruments is a dual-channel high-speed low-side gate driver capable of delivering 5A peak source and sink current per channel in SOIC-8 package. A key feature is the negative input voltage capability (-5V continuous) on the input pins, which provides robust operation in noisy motor drive environments where ground bounce can drive signals below ground. The 25ns typical propagation delay and 15ns/12ns rise/fall times enable high-frequency switching up to several hundred kHz. The D suffix denotes SOIC-8 package and R indicates tape and reel.

Working Principle: UCC27524DR Working Principle

The UCC27524DR operates as a dual low-side gate driver. (1) Each channel receives a logic input (INA/INB) and provides a high-current gate drive output. The input stage features a comparator with TTL/CMOS thresholds and negative voltage tolerance. The -5V input capability means the input pins can be driven 5V below ground without damage or malfunction, critical in motor drive applications where the power ground can bounce below the logic ground during high-current switching events. (2) The output stage uses a bipolar totem-pole architecture capable of 5A peak source and sink current. This high drive capability rapidly charges and discharges the gate capacitance of large MOSFETs or IGBTs, minimizing switching losses. The split output configuration (OUTH/OUTL on some variants) allows independent optimization of turn-on and turn-off gate resistors. (3) The independent enable pins (ENA/ENB) allow each channel to be disabled independently, supporting half-bridge configurations where both switches must not be on simultaneously. The 25ns propagation delay is consistent between channels, minimizing dead-time requirements.

Pin Description: UCC27524DR Pin Definition and Functions
Pin Name Function
1 INA Channel A input (non-inverting)
2 ENA Channel A enable (active high)
3 INB Channel B input (non-inverting)
4 ENB Channel B enable (active high)
5 OUTB Channel B output
6 VDD Power supply (4.5-18V)
7 OUTA Channel A output
8 GND Ground
Application Scenarios: In which products and applications is UCC27524DR used
  • Motor drive inverter MOSFET/IGBT gate drive with -5V input tolerance
  • Solar inverter switching stage driver with 5A gate drive
  • Switch-mode power supply gate driver with independent enables
  • DC-DC converter synchronous rectifier driver with fast propagation
  • Class-D audio amplifier output stage driver with low delay
Alternative Models: What chips are recommended as replacements for UCC27524DR
Model Manufacturer Key Difference
UCC27525DR TI Dual, one inverting/one non-inverting
UCC27531DBVR TI Single 4A, SOT-23-5
IXDN609SI IXYS 9A single, negative input
TC4427ACOA Microchip Dual 1.5A, SOIC-8
FAN3121T onsemi 10A single, SOT-89

Recommend Parts

RK73H1ETTP20R0F

20Ohm +/-1% 0.063W thick film resistor, 0402, +/-100 ppm/C, AEC-Q200

Brand: KOA Speer

Package: 0402 (1005 Metric) 1.0 x 0.5 x 0.35 mm

IN STOCK: 33180pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS77001DBVR

50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

IN STOCK: 5000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS61021ADSGR

3A synchronous boost converter, 1.8-5.5V, VSSOP-8

Brand: TI

Package: VSSOP-8 (3.0 x 3.0 mm, DSG package)

IN STOCK: 12398pcs

Cargo cycle: 3-7 Days

The minimum order is 1

S1MB-13-F

1A 1000V GPP rectifier, 1.1V VF, 3μs trr, SMB/DO-214AA, -65~150°C

Brand: Diodes Inc

Package: SMB / DO-214AA (4.57 x 3.94 x 2.50mm)

IN STOCK: 3679pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADUM5000ARWZ-RL

500mW isolated DC-DC converter, 3.3/5V, SOIC-16W

Brand: ADI

Package: SOIC-16W (10.3 x 7.5 mm, RW package)

IN STOCK: 6373pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADS830E/2K5

8-bit 60MSPS high-speed ADC, TSSOP-24

Brand: TI

Package: TSSOP-24 (7.8 x 4.4 mm)

IN STOCK: 9357pcs

Cargo cycle: 3-7 Days

The minimum order is 1