Opens in a new tab

XL7045E1

100V 0.3A buck DC-DC, integrated MOSFET, ESOP-8

6543

Effective Inventory

Image for reference only

Manufacturer Part:

XL7045E1

Package:

ESOP-8 (5 x 4 x 1.1 mm, exposed pad)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The XL7045E1 from XLSEMI (XinLong Semiconductor) is a 100V, 0.3A step-down DC-DC converter with integrated 100V MOSFET, operating at 100kHz in ESOP-8 package for high-voltage industrial and EV applications.

Key Specifications

Topology Step-down (buck) DC-DC converter
Input Voltage 10V to 80V (max 100V transient)
Output Current 0.3A
Output Voltage Adjustable (1.25V reference)
Switching Frequency 100 kHz typical
Internal MOSFET Yes (100V, 1A rated)
Quiescent Current 2.8 mA typical
Efficiency Up to 85%
Package ESOP-8 (exposed pad)
Operating Temperature -40 to +125 C (TJ)

Features

  • 80V continuous / 100V maximum input for high-voltage systems
  • Integrated 100V MOSFET eliminates external switch
  • Adjustable output from 1.25V to VIN-2V
  • 100kHz fixed frequency for simple filter design
  • ESOP-8 with exposed pad for thermal management

Applications

  • Electric vehicle controller auxiliary power
  • E-bike and scooter battery-powered systems
  • Industrial 48V/60V power distribution
  • Battery-powered instrumentation
  • Automotive 12V/24V step-down converter
Product Introduction: XL7045E1 Product Introduction

The XL7045E1 from XLSEMI (XinLong Semiconductor) is a 100V step-down DC-DC converter with an integrated 100V N-channel MOSFET, capable of operating from 10V to 80V input (100V maximum) and delivering up to 0.3A output current. The device uses a fixed 100kHz switching frequency and adjustable output voltage set by an external resistor divider referenced to a 1.25V feedback voltage. The internal power MOSFET eliminates the need for an external switch, reducing component count and board space. The ESOP-8 package with exposed pad provides adequate thermal dissipation for the modest power levels. The E1 suffix denotes the ESOP-8 package variant.

Working Principle: XL7045E1 Working Principle

The XL7045E1 operates as a current-mode step-down (buck) DC-DC converter. (1) The internal 100V N-channel MOSFET connects the input voltage to the LC output filter through the SW pin. When the MOSFET is on, current ramps up through the inductor and charges the output capacitor. When the MOSFET turns off, the inductor current freewheels through the external Schottky catch diode. (2) The output voltage is regulated by adjusting the MOSFET duty cycle. The FB pin monitors the output voltage through a resistor divider and compares it with the 1.25V internal reference. The error amplifier adjusts the peak current setpoint to maintain regulation. (3) The 100kHz fixed switching frequency is set by an internal oscillator. While not as high as modern converters (which operate at 500kHz+), the 100kHz frequency allows use of larger inductors with lower core losses, which is appropriate for high-voltage applications where inductor voltage ratings are critical. The 2.8mA quiescent current includes the gate drive power for the internal MOSFET.

Pin Description: XL7045E1 Pin Definition and Functions
Pin Name Function
1 VIN Input supply (10-80V)
2 NC No connect
3 NC No connect
4 EN Enable (high=on, low=off)
5 FB Feedback voltage (1.25V reference)
6 COMP Compensation capacitor
7 GND Ground
8 SW Switch output (to inductor/diode)
EP GND Exposed pad (thermal/GND)
Application Scenarios: In which products and applications is XL7045E1 used
  • Electric vehicle controller auxiliary 5V/3.3V power from 48V/72V battery
  • E-bike and scooter battery-powered system 12V/5V supply
  • Industrial 48V/60V power distribution point-of-load converter
  • Battery-powered instrumentation operating from high-voltage packs
  • Automotive 12V/24V step-down converter for 5V/3.3V logic supply
Alternative Models: What chips are recommended as replacements for XL7045E1
Model Manufacturer Key Difference
XL7036E1 XLSEMI 60V, same family, lower voltage
XL1509-5.0E1 XLSEMI 40V, 2A, 150kHz, higher current
TPS54060DGQ TI 60V, 0.5A, programmable freq
LM5017MM TI 100V, 0.6A, constant on-time
MAX17503ATB+T ADI 60V, 0.5A, uSLIC module

Recommend Parts

TMP275AIDR

0.5C I2C temp sensor, 12-bit, 2.7-5.5V, alert output, 8-SOIC

Brand: TI

Package: 8-SOIC (4.90 x 3.91 x 1.50 mm)

IN STOCK: 3681pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IL485E

NVE IL485E IsoLoop isolated RS-485 transceiver, 2.5kVrms isolation, 35Mbps, 16-SOIC WB

Brand: nve

Package: SOIC-16 WB

IN STOCK: 5280pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFS4227TRLPBF

IRFS4227TRLPBF – 200V N-Channel HEXFET PDP Switch Power MOSFET, 26 mΩ RDS(on), D2PAK (TO-263)

Brand: infineon

Package: D2PAK (TO-263)

IN STOCK: 4334pcs

Cargo cycle: 3-7 Days

The minimum order is 1

CD4070BM96

Quad 2-input XOR gate, 3-18V CMOS, 65ns at 10V, SOIC-14

Brand: TI

Package: SOIC-14 (8.75 x 3.9 x 1.5mm)

IN STOCK: 4245pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AB1526

Bluetooth 5.0 Dual Mode Audio SoC, TWS, AAC, Dual-mic ENC, Integrated Charger, BGA

Brand: airoha

Package: BGA

IN STOCK: 25000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

LP2980IM5-5.0

50mA micropower ultra-low-dropout regulator, 5V, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.1 mm)

IN STOCK: 2557pcs

Cargo cycle: 3-7 Days

The minimum order is 1