Opens in a new tab

IR333-A

5mm IR LED, 940nm, 20mW/sr, 20deg, blue epoxy

60048

Effective Inventory

Image for reference only

Manufacturer Part:

IR333-A

Package:

Radial, 5mm Dia (T 1-3/4), through hole

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The IR333-A from Everlight Electronics is a 5mm infrared emitting diode with 940nm peak wavelength, 20mW/sr radiant intensity at 20mA, and 20-degree viewing angle in blue epoxy radial package.

Key Specifications

Peak Wavelength 940 nm
Spectral Bandwidth 45 nm
Radiant Intensity 20 mW/sr typical @ IF=20mA
Radiant Intensity (pulsed) 750 mW/sr @ IF=1A, tp<100us
Forward Voltage 1.2V min, 1.5V typical @ IF=20mA
Continuous Forward Current 100 mA max
Peak Forward Current 1.0 A (tp<100us, 1% duty)
Reverse Voltage 5 V max
Viewing Angle 20 degrees
Power Dissipation 150 mW
Package Radial, 5mm (T 1-3/4), blue epoxy
Operating Temperature -40 to +85 C

Features

  • 940nm peak wavelength matched to IR phototransistors
  • 20mW/sr high radiant intensity at 20mA
  • 750mW/sr in pulsed mode for long-range IR transmission
  • 1.5V low forward voltage for battery operation
  • Halogen-free, RoHS and REACH compliant

Applications

  • Free-air infrared data transmission
  • IR remote control transmitter
  • Optoelectronic switch and interrupter pair
  • Smoke detector IR source
  • IR illumination for security cameras
Product Introduction: IR333-A Product Introduction

The IR333-A from Everlight Electronics is a high-intensity 940nm infrared emitting diode in a 5mm (T 1-3/4) radial through-hole package with blue epoxy lens. The GaAlAs LED chip provides 20mW/sr typical radiant intensity at 20mA forward current, with 750mW/sr available in pulsed mode (1A, tp<100us, 1% duty). The 1.5V typical forward voltage is compatible with single-cell battery operation. The 20-degree narrow viewing angle concentrates IR emission for directed transmission. The device is spectrally matched with Everlight phototransistors and photodiodes such as the PT334-6C.

Working Principle: IR333-A Working Principle

The IR333-A operates as a GaAlAs infrared emitting diode. (1) The GaAlAs (Gallium Aluminum Arsenide) double-heterojunction LED chip emits infrared radiation at 940nm peak wavelength when forward biased. The forward current injects electrons into the active region where they recombine with holes, releasing photons at 940nm wavelength. The 45nm spectral bandwidth provides a relatively narrow emission spectrum centered on 940nm. (2) The blue epoxy lens provides directional emission with a 20-degree half-angle viewing cone, concentrating the IR energy for longer transmission range compared to wide-angle emitters. The radiant intensity of 20mW/sr at 20mA indicates high emission efficiency. In pulsed mode at 1A, the intensity increases to 750mW/sr for high-power burst transmission. (3) The forward voltage of 1.5V typical at 20mA allows operation from a single Li-ion cell (3.0-4.2V) with a simple series resistor. The 100mA maximum continuous current and 150mW power dissipation define the DC operating limits, while the 1A peak current specification supports high-power IR burst applications.

Pin Description: IR333-A Pin Definition and Functions
Pin Name Function
1 (Long) Anode Positive supply (forward bias)
2 (Short) Cathode Negative supply (ground)
Application Scenarios: In which products and applications is IR333-A used
  • Free-air infrared data transmission at 940nm
  • IR remote control transmitter for consumer electronics
  • Optoelectronic switch and interrupter pair with PT334-6C
  • Smoke detector IR source with high radiant intensity
  • IR illumination for security cameras in night vision mode
Alternative Models: What chips are recommended as replacements for IR333-A
Model Manufacturer Key Difference
IR333C-A Everlight Water clear lens version
TSAL6100 Vishay 940nm, 35mW/sr, similar
SFH 4550 ams-OSRAM 850nm, 60mW/sr, high power
TSAL6400 Vishay 940nm, 25mW/sr, wide angle
CQY36N-HR Rohm 940nm, similar, 5mm radial

Recommend Parts

RK73H1ETTP20R0F

20Ohm +/-1% 0.063W thick film resistor, 0402, +/-100 ppm/C, AEC-Q200

Brand: KOA Speer

Package: 0402 (1005 Metric) 1.0 x 0.5 x 0.35 mm

IN STOCK: 33180pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS77001DBVR

50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

IN STOCK: 5000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS61021ADSGR

3A synchronous boost converter, 1.8-5.5V, VSSOP-8

Brand: TI

Package: VSSOP-8 (3.0 x 3.0 mm, DSG package)

IN STOCK: 12398pcs

Cargo cycle: 3-7 Days

The minimum order is 1

S1MB-13-F

1A 1000V GPP rectifier, 1.1V VF, 3μs trr, SMB/DO-214AA, -65~150°C

Brand: Diodes Inc

Package: SMB / DO-214AA (4.57 x 3.94 x 2.50mm)

IN STOCK: 3679pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADUM5000ARWZ-RL

500mW isolated DC-DC converter, 3.3/5V, SOIC-16W

Brand: ADI

Package: SOIC-16W (10.3 x 7.5 mm, RW package)

IN STOCK: 6373pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADS830E/2K5

8-bit 60MSPS high-speed ADC, TSSOP-24

Brand: TI

Package: TSSOP-24 (7.8 x 4.4 mm)

IN STOCK: 9357pcs

Cargo cycle: 3-7 Days

The minimum order is 1