Product Overview
The ATSAMD21J18A-AUT from Microchip Technology is a low-power 32-bit Cortex-M0+ MCU at 48MHz with 256KB Flash, 32KB SRAM, USB, and rich analog in 64-pin TQFP package.
Key Specifications
| Core | Arm Cortex-M0+ @ 48MHz |
| Flash Memory | 256 KB |
| SRAM | 32 KB |
| ADC | 20-channel x 12-bit, 350ksps, PGA 1/2x-16x |
| DAC | 1 x 10-bit, 350ksps |
| SERCOM | 6 (configurable as USART/SPI/I2C/LIN) |
| USB | Full-Speed 2.0 Device/Host (8 endpoints) |
| Timers | 5x TC (16-bit) + 4x TCC (24-bit with PWM) |
| Touch | PTC with 256-channel capacitive sensing |
| DMA | 12-channel DMAC |
| Supply Voltage | 1.62 V to 3.63 V |
| GPIO | 52 pins |
| Package | 64-TQFP (AUT suffix, 10x10mm) |
| Operating Temperature | -40 to +85 C |
Features
- Ultra-low-power Cortex-M0+ with SleepWalking peripherals
- 6 SERCOM modules configurable as UART, SPI, or I2C
- IoT sensor nodes with USB connectivity
- Home automation and smart devices
- Capacitive touch user interfaces
- Portable medical instruments
- Industrial metering and data logging
- IoT sensor nodes with USB connectivity and capacitive touch UI
- Home automation and smart devices with 6 SERCOM modules
- Capacitive touch user interfaces with 256-channel PTC
- Portable medical instruments with 12-bit ADC PGA and USB
- Industrial metering and data logging with DMA and SleepWalking
Applications
Product Introduction: ATSAMD21J18A-AUT Product Introduction
The ATSAMD21J18A-AUT from Microchip Technology is a low-power, high-performance 32-bit microcontroller based on the Arm Cortex-M0+ processor running at 48MHz. The device features 256KB Flash, 32KB SRAM, 6 SERCOM modules (each configurable as USART, SPI, or I2C), full-speed USB 2.0 with embedded host and device, 20-channel 12-bit ADC with programmable gain amplifier and hardware oversampling up to 16-bit effective resolution, 10-bit DAC, 12-channel DMA, and 256-channel capacitive touch sensing. The SleepWalking peripheral architecture allows peripherals to operate in standby mode, waking the CPU only when a condition is met. The AUT suffix denotes 64-pin TQFP package with industrial temperature range and tape and reel.
Working Principle: ATSAMD21J18A-AUT Working Principle
The ATSAMD21J18A-AUT operates as a low-power Cortex-M0+ microcontroller with flexible peripheral configuration. (1) The Cortex-M0+ core executes instructions at 48MHz with single-cycle hardware multiplier and Micro Trace Buffer (MTB) for debug trace. The internal clock system includes 48MHz DFLL (Digital Frequency Locked Loop) and 48-96MHz FDPLL (Fractional Digital PLL), allowing operation from internal oscillators without external crystals. The SleepWalking architecture enables peripherals to remain partially active in standby mode, triggering interrupts only when specific conditions are met. (2) The 6 SERCOM modules provide extreme flexibility: each can be independently configured as USART (full/half duplex, LIN slave), SPI (up to 30MHz master), or I2C (up to 3.4MHz, SMBus/PMBus). This allows any combination of serial interfaces up to the 6-module limit. The 12-channel DMA controller offloads data transfer between peripherals and memory without CPU intervention. (3) The 12-bit ADC features a programmable gain amplifier (1/2x to 16x) for direct sensor interface without external op-amps, automatic offset and gain error compensation, and hardware oversampling/decimation for 13-16 bit effective resolution. The 10-bit DAC provides analog output capability. The PTC (Peripheral Touch Controller) supports 256 capacitive touch channels with proximity detection, enabling sophisticated touch user interfaces without external touch ICs.
Pin Description: ATSAMD21J18A-AUT Pin Definition and Functions
| Pin Group | Count | Function |
|---|---|---|
| PORTA | 16 | ADC, USB, SERCOM, TCC, PTC |
| PORTB | 16 | ADC, SERCOM, TC, TCC, PTC |
| PORTA/B Ext | 20 | Additional GPIO and peripheral mux |
| Power | 12 | VDD, VDDIO, VDDANA, GND, VDDIN |
Application Scenarios: In which products and applications is ATSAMD21J18A-AUT used
Alternative Models: What chips are recommended as replacements for ATSAMD21J18A-AUT
| Model | Manufacturer | Key Difference |
|---|---|---|
| ATSAMD21G18A-AUT | Microchip | 48-pin, 6 fewer SERCOM pins |
| ATSAMD20J18A-AUT | Microchip | No USB, same pin-compatible |
| SAMD51J19A-AUT | Microchip | Cortex-M4, 120MHz, same pinout |
| STM32G071RBT6 | ST | Cortex-M0+, 64MHz, LQFP-64 |
| LPC55S69JBD100 | NXP | Dual M33, 100MHz, LQFP-100 |
Recommend Parts

IRFS4310ZTRLPBF
IRFS4310ZTRLPBF – 100V N-Channel HEXFET Power MOSFET, 7 mΩ RDS(on), D2PAK (TO-263AB)
Brand: infineon
Package: D2PAK (TO-263AB)
IN STOCK: 11137pcs
Cargo cycle: 3-7 Days
The minimum order is 1

MSASJ105BB5475MFNA01
4.7uF 6.3V X5R MLCC, 0402, Taiyo Yuden
Brand: gigadevice
Package: 0402 (1005 Metric, 1.0 x 0.5 x 0.5 mm)
IN STOCK: 9701pcs
Cargo cycle: 3-7 Days
The minimum order is 1

IRF3415PBF
150V N-channel power MOSFET, 43A, 41mΩ RDS(on), TO-220AB package
Brand: infineon
Package: TO-220AB
IN STOCK: 2940pcs
Cargo cycle: 3-7 Days
The minimum order is 1

105017-1001
USB Type-C receptacle connector, 24-pin, SMD
Brand: Amphenol
Package: SMD (8.9 x 7.3 x 3.2 mm, right angle)
IN STOCK: 5335pcs
Cargo cycle: 3-7 Days
The minimum order is 1

IRLB3034PBF
IRLB3034PBF – 40V N-Channel StrongIRFET Power MOSFET (Logic Level), 1.7 mΩ (max) @ 10V; 2.0 mΩ @ 4.5V RDS(on), TO-220AB
Brand: infineon
Package: TO-220AB
IN STOCK: 9724pcs
Cargo cycle: 3-7 Days
The minimum order is 1

XC6SLX75-2FGG484I
Spartan-6 LX75 FPGA, 74637 logic cells, 132 DSP, 3096KB BRAM, 408 I/O, FBGA-484 23x23mm, -2 speed, industrial -40~100C, AMD Xilinx
Brand: xilinx
Package: FGG484 (484-ball fine-pitch BGA, 23x23mm body, 1.0mm ball pitch, 22×22 ball array, 6 I/O banks, lead-free)
IN STOCK: 890pcs
Cargo cycle: 3-7 Days
The minimum order is 1






