Opens in a new tab

TLV62130RGTR

3A sync buck, 4-17V, 17uA IQ, DCS-Control, QFN-16

12000

Effective Inventory

Image for reference only

Manufacturer Part:

TLV62130RGTR

Package:

QFN-16 (3.0 x 3.0 x 0.9 mm, exposed pad)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The TLV62130RGTR from Texas Instruments is a 3A synchronous step-down DC-DC converter with 4V-17V input, 17uA IQ, and DCS-Control architecture in 3x3mm QFN package.

Key Specifications

Topology Synchronous Buck (integrated FETs)
Input Voltage 4 V to 17 V
Output Voltage 0.9 V to 6 V (adjustable)
Output Current 3 A maximum
Feedback Voltage 0.8 V typical
Switching Frequency 2.5 MHz (default, adjustable)
Quiescent Current (Active) 17 uA typical (DCS-Control PFM)
Shutdown Current 1 uA typical
HS FET RDS(ON) 100 mOhm typical
LS FET RDS(ON) 65 mOhm typical
Control Mode DCS-Control (PFM/PWM auto)
Protection OCP, thermal shutdown, UVLO
Package QFN-16 (3x3mm, RGT suffix)
Operating Temperature -40 to +125 C (TJ)

Features

  • 17uA ultra-low IQ with DCS-Control for highest light-load efficiency
  • 2.5MHz high frequency enables small inductor and capacitors
  • Auto PFM/PWM for efficiency across entire load range
  • 100% duty cycle mode for lowest dropout operation
  • Power good output and precision enable for sequencing

Applications

  • Battery-powered systems requiring long runtime
  • Industrial sensors and low-power wireless nodes
  • Point-of-load conversion from 5V/12V rails
  • Portable medical devices and wearables
  • Embedded processor and FPGA core voltage supply
Product Introduction: TLV62130RGTR Product Introduction

The TLV62130RGTR from Texas Instruments is a 3A synchronous step-down DC-DC converter with 4V-17V input range in 3x3mm QFN-16 package. The device features TI’s proprietary DCS-Control architecture with 17uA typical quiescent current, providing the highest light-load efficiency in its class. The 2.5MHz default switching frequency allows use of small inductors and capacitors, minimizing total solution size. The converter operates in PFM mode at light loads for efficiency and transitions to PWM mode at heavier loads for low output ripple. The 100% duty cycle mode enables the output to approach the input voltage in dropout conditions. The RGT suffix denotes 3x3mm QFN-16 package with tape and reel.

Working Principle: TLV62130RGTR Working Principle

The TLV62130RGTR operates as a synchronous buck converter using TI’s DCS-Control architecture. (1) DCS-Control (Direct Control with Seamless transition) is a proprietary control topology that combines the fast transient response of voltage-mode control with the stable operation of current-mode control. The error amplifier directly controls the on-time of the high-side MOSFET, adjusting it based on the output voltage error. This direct control path eliminates the current sense comparator delay, enabling faster transient response than traditional current-mode control. (2) At light loads, the device enters PFM (Pulse Frequency Modulation) mode where the switching frequency decreases proportionally to the load current. The high-side MOSFET switches on until the output exceeds the set point, then remains off until the output drops below the threshold. This discontinuous operation dramatically reduces switching losses and gate drive losses, achieving 17uA quiescent current. As the load increases, the transition to PWM (Pulse Width Modulation) mode is seamless without output voltage disturbance. (3) In dropout conditions (VIN close to VOUT), the device enters 100% duty cycle mode where the high-side MOSFET is continuously on and the low-side MOSFET is off. This minimizes the dropout voltage to just the RDS(ON) of the high-side FET times the load current (100mOhm x 3A = 300mV typical), allowing the output to track the input as closely as possible.

Pin Description: TLV62130RGTR Pin Definition and Functions
Pin Name Function
1 SW Switch node (inductor connection)
2 SW Switch node (inductor connection)
3 VIN Input supply (4-17V)
4 VIN Input supply (4-17V)
5 EN Enable (active high)
6 SS/TR Soft-start / tracking
7 DEF Output voltage default setting
8 FB Feedback (0.8V reference)
9 AGND Analog ground
10 PGOOD Power good (open drain)
11-16 PGND/NC Power ground / no connect
Application Scenarios: In which products and applications is TLV62130RGTR used
  • Battery-powered systems requiring 17uA IQ for long runtime
  • Industrial sensors and low-power wireless nodes with 4-17V input
  • Point-of-load 5V/12V to 1.8V/3.3V conversion at 3A
  • Portable medical devices and wearables with PFM light-load mode
  • Embedded processor and FPGA core voltage supply with PGOOD
Alternative Models: What chips are recommended as replacements for TLV62130RGTR
Model Manufacturer Key Difference
TLV62130ARGTR TI Auto PFM/PWM, same package
TPS62130ARGTR TI 3A, 3-17V, forced PWM option
TPS62133RGTR TI 3A, 5V fixed output, QFN-16
L6981NQR ST 1.5A, 4-38V, HSOIC-8
MAX17503ATP+ ADI 5A, 4.5-60V, TSSOP-20

Recommend Parts

TMP275AIDR

0.5C I2C temp sensor, 12-bit, 2.7-5.5V, alert output, 8-SOIC

Brand: TI

Package: 8-SOIC (4.90 x 3.91 x 1.50 mm)

IN STOCK: 3681pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IL485E

NVE IL485E IsoLoop isolated RS-485 transceiver, 2.5kVrms isolation, 35Mbps, 16-SOIC WB

Brand: nve

Package: SOIC-16 WB

IN STOCK: 5280pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFS4227TRLPBF

IRFS4227TRLPBF – 200V N-Channel HEXFET PDP Switch Power MOSFET, 26 mΩ RDS(on), D2PAK (TO-263)

Brand: infineon

Package: D2PAK (TO-263)

IN STOCK: 4334pcs

Cargo cycle: 3-7 Days

The minimum order is 1

CD4070BM96

Quad 2-input XOR gate, 3-18V CMOS, 65ns at 10V, SOIC-14

Brand: TI

Package: SOIC-14 (8.75 x 3.9 x 1.5mm)

IN STOCK: 4245pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AB1526

Bluetooth 5.0 Dual Mode Audio SoC, TWS, AAC, Dual-mic ENC, Integrated Charger, BGA

Brand: airoha

Package: BGA

IN STOCK: 25000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

LP2980IM5-5.0

50mA micropower ultra-low-dropout regulator, 5V, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.1 mm)

IN STOCK: 2557pcs

Cargo cycle: 3-7 Days

The minimum order is 1