Opens in a new tab

PESD5V0S2BA.215

Dual bidirectional ESD diode, 5V, 0.8pF, SOT-23

80000

Effective Inventory

Image for reference only

Manufacturer Part:

PESD5V0S2BA.215

Package:

SOT-23 (2.9 x 1.3 x 1.0 mm, 3-pin)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The PESD5V0S2BA.215 from Nexperia is a dual bidirectional TVS diode for ESD protection with 5V working voltage, 15kV contact discharge, and low 0.8pF capacitance in SOT-23 package.

Key Specifications

Configuration Dual bidirectional (2 diodes in common anode)
Working Voltage (VRWM) 5.0 V
Breakdown Voltage (VBR) 6.0 V min / 7.5 V typ
Clamping Voltage (VC) @ IPP 9.2 V typical @ 2A
ESD Protection (IEC 61000-4-2) +/-15 kV contact, +/-25 kV air
Diode Capacitance (Cd) 0.8 pF typical @ 1MHz, VR=0V
Leakage Current (IR) 0.1 uA max @ VRWM=5V
Peak Pulse Current (IPP) 5.8 A (8/20us)
Package SOT-23 (2 pins + tab)
Operating Temperature -55 to +150 C (TJ)

Features

  • 0.8pF ultra-low capacitance for high-speed signal protection
  • +/-15kV contact ESD protection per IEC 61000-4-2
  • Bidirectional protection for AC signal lines
  • Dual channel in compact SOT-23 package
  • Low clamping voltage of 9.2V at 2A

Applications

  • USB 2.0 and HDMI high-speed data line ESD protection
  • Ethernet and CAN bus transient protection
  • Touchscreen and display interface protection
  • Mobile device port protection
  • General-purpose high-speed signal line ESD clamping
Product Introduction: PESD5V0S2BA.215 Product Introduction

The PESD5V0S2BA.215 from Nexperia is a dual bidirectional TVS diode array for ESD protection in SOT-23 package. The device features 5V working voltage, 0.8pF typical capacitance per diode, and +/-15kV contact discharge protection per IEC 61000-4-2. The bidirectional configuration protects both positive and negative ESD events, making it suitable for AC signal lines. The ultra-low 0.8pF capacitance preserves signal integrity on high-speed interfaces up to several hundred MHz. The common anode configuration connects the two anodes together at pin 3, with the two cathodes at pins 1 and 2. The 215 suffix denotes tape and reel packaging.

Working Principle: PESD5V0S2BA.215 Working Principle

The PESD5V0S2BA.215 operates as a bidirectional ESD protection clamp. (1) Under normal operating conditions, the signal voltage on the protected line is within the working voltage range (0V to 5V for bidirectional). The TVS diode presents a very high impedance (leakage < 0.1uA) and extremely low capacitance (0.8pF), making it virtually transparent to the signal. The low capacitance is critical for high-speed signals where even a few picofarads of parasitic capacitance can degrade signal integrity and cause reflections. (2) When an ESD event occurs (up to +/-15kV contact discharge), the TVS diode avalanches and clamps the voltage to a safe level. The clamping voltage is typically 9.2V at 2A peak pulse current, well below the damage threshold of most ICs. The bidirectional configuration means the device clamps both positive and negative ESD events by conducting through the appropriate diode junction. (3) The dual common-anode configuration allows protecting two signal lines with a single device. Each cathode (pins 1 and 2) connects to a signal line, while the common anode (pin 3) connects to ground. When ESD strikes either signal line, the corresponding diode conducts to ground, shunting the ESD current away from the protected IC. The extremely fast response time (< 1ns) of the TVS diode ensures clamping before the ESD pulse reaches its peak, protecting even the most ESD-sensitive CMOS inputs.

Pin Description: PESD5V0S2BA.215 Pin Definition and Functions
Pin Name Function
1 K1 Cathode 1 (signal line 1)
2 K2 Cathode 2 (signal line 2)
3 A1/A2 Common Anode (ground connection)
Application Scenarios: In which products and applications is PESD5V0S2BA.215 used
  • USB 2.0 and HDMI high-speed data line ESD protection with 0.8pF
  • Ethernet and CAN bus transient protection for bidirectional signals
  • Touchscreen and display interface protection with low capacitance
  • Mobile device port protection against +/-15kV ESD
  • General-purpose high-speed signal line ESD clamping in SOT-23
Alternative Models: What chips are recommended as replacements for PESD5V0S2BA.215
Model Manufacturer Key Difference
PESD5V0S2BL.315 Nexperia Same, lead-free SOD-323
TPD4E05U06DQAR TI 4-channel, 5V, 0.5pF, USON-10
PRTR5V0U2X.215 Nexperia Dual unidirectional, SOT-143
NUP4115UPXV6T1G onsemi 4-channel, 5V, 0.8pF, UDFN-6
TUSB4020IPHPR TI USB hub with integrated ESD

Recommend Parts

RK73H1ETTP20R0F

20Ohm +/-1% 0.063W thick film resistor, 0402, +/-100 ppm/C, AEC-Q200

Brand: KOA Speer

Package: 0402 (1005 Metric) 1.0 x 0.5 x 0.35 mm

IN STOCK: 33180pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS77001DBVR

50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

IN STOCK: 5000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS61021ADSGR

3A synchronous boost converter, 1.8-5.5V, VSSOP-8

Brand: TI

Package: VSSOP-8 (3.0 x 3.0 mm, DSG package)

IN STOCK: 12398pcs

Cargo cycle: 3-7 Days

The minimum order is 1

S1MB-13-F

1A 1000V GPP rectifier, 1.1V VF, 3μs trr, SMB/DO-214AA, -65~150°C

Brand: Diodes Inc

Package: SMB / DO-214AA (4.57 x 3.94 x 2.50mm)

IN STOCK: 3679pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADUM5000ARWZ-RL

500mW isolated DC-DC converter, 3.3/5V, SOIC-16W

Brand: ADI

Package: SOIC-16W (10.3 x 7.5 mm, RW package)

IN STOCK: 6373pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADS830E/2K5

8-bit 60MSPS high-speed ADC, TSSOP-24

Brand: TI

Package: TSSOP-24 (7.8 x 4.4 mm)

IN STOCK: 9357pcs

Cargo cycle: 3-7 Days

The minimum order is 1